universaldouglas.com
Installation Guide for universal douglas models including: BT-4BTSW-A, BT-8BTSW-A, BT-DMSW-A, BT-4BTSW-A Bluetooth Switches, BT-4BTSW-A, Bluetooth Switches, Switches
LED Selectable Wattage and CCT Volumetric - Universal Douglas
Resource Library - Universal Douglas
File Info : application/pdf, 10 Pages, 2.14MB
DocumentDocumentBluetooth Switches Installation Manual | A v07 BT-4BTSW-A PAGE 1 BT-8BTSW-A BT-DMSW-A universaldouglas.com This page intentionally blank. PAGE 2 universaldouglas.com WARNING! SYSTEM MUST BE INSTALLED IN ACCORDANCE WITH LOCAL AND NATIONAL ELECTRICAL CODES For indoor installations. ! Risk of Electric Shock. All servicing should be performed by qualified service personnel. To reduce the risks of electric shock disconnect power supplies before servicing. SAVE THESE INSTRUCTIONS · READ AND FOLLOW ALL SAFETY INSTRUCTIONS. · Be aware that Line Voltage Connections may be 120Vac or 277Vac or 347Vac · Do not install near gas or electric heaters. · Equipment should be mounted in locations and at heights where it will not readily be subjected to tampering by unauthorized personnel. · The use of accessory equipment not recommended by the manufacturer may cause an unsafe condition. · Do not use this equipment for other than intended use o Wireless devices are only for lighting control o Wireless controls cannot be used with portable heating appliances PAGE 3 universaldouglas.com Contents Bluetooth Switches Installation Manual | A v07 1. Introduction 5 2. Part Numbers & Names 5 3. Design Features 6 4. Specifications 6 Mounting Power Operating Environment Storage Temperature Approvals Note 5. Dimensions 7 6. Installation Features 7 7. Installation / Wiring / Commissioning 8 PAGE 4 universaldouglas.com 1. Introduction Douglas Lighting Controls Bluetooth® Wall Station Switches; · BT-4BTSW-A (4-button switch) · BT-8BTSW-A (8-button switch) · BT-DMSW-A (dimmer & 1-button switch) Provide ON/OFF, Dimming, and Scene control based on the device configuration and fixture wiring. The devices require a Douglas Lighting Controls Bluetooth Controller (BT-PP20-A) connected to the fixture(s). Each switch is available in either a 120/277VAC or 347VAC model. The devices are capable of communicating with other Douglas Lighting Controls Bluetooth enabled devices (occupancy sensors, gateways, and controllers as part of the defined wireless eco-system) via the Bluetooth wireless network. Commissioning is conveniently done at deck level with our free iOS App using the Bluetooth functionality of the smartphone. 2. Part Numbers & Names Part Number Model BT-4BTSW-U-A BT-4BTSW-3-A BT-8BTSW-U-A BT-8BTSW-3-A BT-DMSW-U-A BT-DMSW-3-A DOUGLAS LIGHTING CONTROLS Bluetooth 4-Button Switch 120/277VAC DOUGLAS LIGHTING CONTROLS Bluetooth 4-Button Switch 347VAC DOUGLAS LIGHTING CONTROLS Bluetooth 8-Button Switch 120/277VAC DOUGLAS LIGHTING CONTROLS Bluetooth 8-Button Switch 347VAC DOUGLAS LIGHTING CONTROLS Bluetooth Dimmer & 1-Button Switch 120/277VAC DOUGLAS LIGHTING CONTROLS Bluetooth Dimmer & 1-Button Switch 347VAC PAGE 5 universaldouglas.com 3. Design Features · Standard single gang dimensions · Tinned and stripped, colour coded wires · Bluetooth wireless technology · 120/277VAC models · 347VAC models 4. Specifications Mounting · The device is designed to be mounted into the appropriately sized 120/277VAC or 347VAC wall station gang box Power · Line Voltage: 120/277VAC or 347VAC (device dependent) · Frequency: 60Hz Operating Environment · Indoor, stationary, non-vibrating, non-corrosive atmosphere and non-condensing humidity Operating Temperature · 32°F to 104°F (0°C to 40°C) Storage Temperature · -14° to 140°F (-25° to 60°C) Approvals · Certified to CAN/CSA Std. C22.2 No. 14 · Conforms to UL 508 Standard · FCC Class A · ASHRAE 90.1 Compliant · CEC Title 24 Compliant Note · Contains IC: 8254A-B1010SP0 · Contains FCC ID: W7Z-B1010SP0 PAGE 6 universaldouglas.com 5. Dimensions 6. Installation Features · Tinned and stripped, colour coded wires (Black Line, White Neutral, Green Ground) · Mounts into listed standard wall station gang box · Bluetooth enabled for wireless fixture control and wireless mesh networking · Switches can be used with Decora style switch covers PAGE 7 universaldouglas.com 7. Installation/Wiring/Commissioning CAUTION ! Risk of Electric Shock. All servicing should be performed by qualified service personnel. To reduce the risks of electric shock disconnect power connections before servicing. · For Installation with field-installed conductors of 60°C (140°F) minimum rating · Mounts into the appropriately sized 120/277VAC or 347VAC wall station gang box see dimension diagram · Install device into position · Connect wires as shown on diagram (14AWG) · Download free smartphone Commissioning App · Use Commissioning App to configure system PAGE 8 universaldouglas.com This page intentionally blank. PAGE 9 universaldouglas.com It's EASY to REACH US... DOUGLAS LIGHTING CONTROLS toll free: 1-877-873-2797 techsupport@universaldouglas.com www.universaldouglas.com UNIVERSAL LIGHTING TECHNOLOGIES, INC. toll free: 1-800-225-5278 tes@universaldouglas.com www.universaldouglas.com Dialog® is a Registered Trademark of Douglas Lighting Controls. January 2017 Subject to change without notice. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc. and any use of such marks is under license. Other trademarks and trade names are those of their respective owners. Rev. 7/14/22 PAGE 10 universaldouglas.com