Product Description
HLK-FAM36 is an AI smart WIFI digital photo frame, which can show your wonderful photos from your mobile phone to the frame anytime and anywhere without developing and printing.
After the smart photo frame connects to the Internet, you can upload photos from your mobile phone to the photo frame to realize the management update function. The photo frame adopts a 10.1-inch LCD screen, which can achieve a large-screen high-definition presentation of the wonderful moments of life.
Product Parameters
- 10.1-inch LCD screen resolution 1024×600px;
- Effective display area 222.72(H)×125.28(V)mm;
- Picture display form JPG/JPEG;
- 4G memory storage capacity;
- Type C power supply interface;
- 5V1A input power;
- Mobile APP operation mode;
- Temperature range: Working temperature 0°C~+40°C, Storage temperature -10°C~+60℃.
Safety Warnings & Precautions
In order to use this device correctly and safely, please read the following contents carefully and strictly abide by before using.
Note: without otherwise specified, "device" refers to the frame itself and its related accessories.
- During storage, transportation, and use of the device, please keep the device dry, and avoid violent collision between the device and other objects.
- Do not disassemble the device by yourself. If the device fails, please contact the supplier in time.
- Without authorization, no unit or individual may change the device structure, safety and performance design.
- When using the device, you should follow relevant laws and regulations and respect the legal rights of others.
Appearance Introduction
The device features a screen, shell, power button, power port, and a bracket.
Bracket: There are 2 bracket holes on the back panel of the device. The bracket can be unplugged and inserted into the remaining holes for adjustment.
Power button: Short press to open or close the frame. Press twice quickly to rotate the photo. Press and hold for more than 5 seconds to enter the network waiting state.
Use the Document and APP downloads
One way: Please scan the attached QR code for product manual and APP.
Another way: Search the keyword "Smart Albums" in Google Play or App Store on your phone.
[Image description: Two QR codes are shown. The left one is labeled "Product Manual" and the right one is labeled "Smart Albums App".]
APP function introduction
Add device
1. Turn on the Bluetooth function and WiFi function of the mobile phone, and connect the phone to the router WiFi. Please make sure that the location service function of your phone is turned on. Otherwise, the software will not be able to search for nearby photo frame devices to be connected to the network, and will not be able to automatically obtain the current WiFi information.
? 2.4G WiFi
? Bluetooth
2. Switch the device to the status of the network to be configured: Short press the switch button on the back of the photo frame to open the frame. Long press for more than 5 seconds, it will automatically enter the status of the network to be configured, and the guide interface will be displaying.
[Image description: A diagram shows the back of the photo frame with a power button labeled "Power Button (Hold On>5s)".]
The guide interface includes:
- a. Product overview, instructions for use and APP download address.
- b. Network distribution guidance, network distribution and related operations of adding device.
- c. Upload guidance, methods and steps for uploading photos.
APP search device
[Image description: Two screenshots of a mobile app interface. The first shows "Finding equipment..." and "The device enters the waiting network state." The second shows a specific device identifier "28:6D:CD:80:A6:9E" with a right arrow, indicating selection.]
Note: On the homepage, click "Add Device" or "+" in the upper right corner to enter the search interface. The APP will automatically search for nearby photo frame devices to be connected to the network.
Start binding
Select the corresponding device, enter the password of the router, click "Start Binding", waiting for the APP to prompt that the network configuration is successful. That is, the device binding is successful. Click "OK" to return to the home page and display the device.
[Image description: A screenshot of a mobile app showing "Select 2.4GHz WiFi Input" with a progress circle indicating "Connected 4%". Below the circle, it lists "Find equipment", "Configure the network", and "Device is being initialized".]
Note: Due to router signal, abnormal login password, and other uncertain factors, it may lead to the failure of network distribution. Once it occurs, please repeat the above steps.
FCC Warning
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.