EU Declaration of Conformity
Hereby, B&W Group Ltd, located at Dale Road, Worthing, West Sussex, BN11 2BH, United Kingdom, declares that the product:
Product Description: Noise Cancelling Wireless Headphones
Type Designation(s): Px7 S3
Trademark: Bowers & Wilkins
Is in conformity with the relevant Union harmonisation legislation:
- RE Directive 2014/53/EU
- RoHS Directive 2011/65/EU & 2015/863/EU
With reference to the following standards applied:
Standard | Details |
---|---|
EN 62368-1:2014+A11:2017 | Audio/video, information and communication technology equipment - Part 1: Safety requirements |
EN 55032:2015+A11:2020 | Electromagnetic compatibility of multimedia equipment - Emission Requirements |
EN 61000-4-2:2009 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
EN IEC 61000-4-3:2020 | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
EN 61000-4-4:2012 | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
EN 61000-4-6:2014+AC:2015 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
EN 301 489-1 V2.2.3 | Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment; Part 1: Common technical requirements |
EN 62479:2010 | Assessment of human exposure to electromagnetic fields from wireless communication devices |
EN 18031-2:2024 | Electromagnetic compatibility and Radio spectrum Matters (ERM) - EMC for wireless communication equipment - Part 2: Specific conditions for Bluetooth |
EN 50663:2017 | Calculation of the absorbed power density in the human body in the radio frequency range from 3 kHz to 300 GHz |
EN 18031-1:2024 | Electromagnetic compatibility and Radio spectrum Matters (ERM) - EMC for wireless communication equipment - Part 1: General requirements |
EN IEC63000:2018 | Electromagnetic compatibility (EMC) - Guidance on the reduction of emission of electromagnetic disturbances in the design of electrical and electronic apparatus |
The following table details the radio equipment's performance:
Type | Frequency Range | EIRP limit dBm | Max meas. EIRP dBm |
---|---|---|---|
BT | 2402~2480MHz | 20 | 11.84 |
Description of accessories and components, including software, which allow the radio equipment to operate as intended and covered by the DoC:
- Software: 3.7.1.2 or later
- Accessories and components: USB-C to USB-C charging cable, USB-C to 3.5 mm audio cable, Storage case.
Signed for and on behalf of:
Place and date of issue: Worthing, England, 2025-07-21
Name, Function, Signature: Pat Sullivan, Director Hardware QA