User Guide for ZOSI models including: C301, Wire-Free Battery Camera System, Battery Camera System, Wire-Free Battery Camera, Battery Camera, Camera
Connect your smartphone to WiFi network, scan the QR code below, and download and install the App to finish registration according to the instructions.
Wire-Free Battery Camera System Please read the Quick Start Guide carefully before using the product and keep it properly. Scan the QR code on the device via ZOSI Smart App.
Wire-Free Battery Camera System Please read the Quick Start Guide carefully before using the product and keep it properly. Scan the QR code on the device via ZOSI Smart App. What's in the Box 4 x Camera 1 x NVR 1 x Power Adapter 1 x Ethernet Cable 1 x Wireless Receiver 1 x USB Mouse Quick Start Guide 4 x Mounting Screw Bag 4 x Mounting Base 1 x Quick Start Guide 2 Product Appearance HDMI LAN Port SD Card Slot USB Mouse Antenna VGA RX USB Power Port USB Power Cord Indicator LED Antenna HD Lens Microphone Connect Key Speaker Charge Indicator LED IR-LEDs PIR White LEDs 3 Rubber Plug (Power Port inside) Download ZOSI Smart App Connect your smartphone to WiFi network, scan the QR code below, and download and install the App to finish registration according to the instructions. Scan the QR code via smartphone to download ZOSI Smart App 4 Connect to Power Supply Connect the power port of the camera to outlet using the power adapter. DSL/CABLE MODEM Router NVR 5 When the camera makes a hum, it means the camera is activated. The indicator LED is off after starting. Solid red light: the camera is pairing. The red light returns to off state, indicating the camera is connected successfully. 6 Quick Configuration Operating the camera connection on the NVR operation page, press the connect key behind the battery camera, and start to configure. Connect Key 7 Camera Installation The mounting wall should have a certain thickness which can bear at least 3 times the weight of the camera. 1.Mount the Base 2.Mount the Anchoring Wall 8 Adjust the Angle Loosen the adjusting screw to adjust the angle of the camera. Tighten the adjusting screw after the adjustment. Wall Adjusting Screw 9 FAQs 1.Q: Why can't I add a device by using local search? A: Please make sure the device and mobile phone are in the same LAN. If you can't make both of them in the same LAN, please manually enter the UID of the device to add a device. 2.Q: Why is the device disconnected? A: Please check Whether the device is connected to the network Whether the router is operating normally Whether the function of obtaining an IP address automatically is chosen or not 3.Q: Why can't I find the video recording file? A: Please check Whether the SD card is damaged Whether the date of the searched file is valid Whether the time of the device system is correct or not 10Icecream Pdf Editor 1.23 Adobe PDF Library 15.0