Eridanus Kitchen & Bath
Farmhouse Apron Front Kitchen Sink
Model: FH-SINK-010
Specifications
Features
- Installation Type
- Farmhouse/Apron Front
- Material
- Ceramic
- Finish
- Glossy
- Color
- White (WH)
- Apron
- Smooth
- Number of Bowl(s)
- 1
- Drain Size
- 1-3/4"
- Drain Location
- Center
- Minimum Cabinet Size
- 24"
Nominal Dimensions
The sink is depicted from multiple views, showing its dimensions. The main sink is a white ceramic, single-bowl, apron-front design.
| Dimension | Measurement |
|---|---|
| Side to Side | 20-7/8" |
| Front to Back | 15-15/16" |
| Height | 7-7/8" |
| Bowl Dimensions | 19-11/16" W. x 14-9/16" D. x 6-1/2" H. |
| Net Weight | 44 lbs |
Accessories
- Faucet
- No
- Basket Strainer
- No
- Grid
- Yes
- Soap Dispenser
- No
- Pop-Up Drain
- Yes
Notes
- Refer to installation instructions for specific model installation.
- Due to the ceramic process, dimensions may vary by up to 1-1/2 inches. Use actual sink dimensions for countertop cutouts.
- Eridanus reserves the right to make product specification revisions without notice.
Care & Maintenance Guide
Ceramic Kitchen Sink
Eridanus kitchen sinks are crafted from handcrafted ceramic and undergo strict quality inspection. Their non-porous construction makes them easy to clean, but they require proper care for long-term use.
Cleaning
To maintain the sink's appearance, clean after every use with a soft cloth and, if necessary, a non-abrasive cleanser. A simple solution of warm water or a mild liquid non-antibacterial detergent is effective. Rinse thoroughly and wipe dry after each cleaning to prevent water spots.
Maintenance
Avoid storing open containers of household cleaners and chemicals containing chloride (such as bleach, acid, drain cleaners, or toilet bowl cleaner) beneath the sink, as vapor emissions can cause corrosion to metal components like faucet supply lines. The glossy surface is susceptible to damage from sharp or metallic objects, particularly metal cutlery. Use protective plastic bowls, wire grid cutlery holders, and drainers with non-abrasive bases to prevent scratches. Never use abrasive cleansers or applicators containing sand or silica, as they can scratch the surface.
It is recommended to use a grid or rack to protect the sink's surface. All Eridanus Kitchen Sinks come with a compatible grid.
Key properties:
- Non-Porous ?
- Rust Resistant ⚙️
- Scratch Resistant ⚠️
- Sound Dampening ?
Installation Instructions
Before You Begin
Caution: Risk of personal injury or product damage. Handle with care.
- Read installation and care instructions thoroughly.
- Inspect your sink for any noticeable damage before installation.
- Observe all local plumbing and building codes.
- Product drawings are for illustration purposes only; actual product may vary.
- Due to the manufacturing process, sinks may vary slightly dimensionally. Refer to the actual model for cut-out processes. No template is provided.
- Ensure sufficient counter space for faucet, water supply lines, drain assembly, garbage disposal mounting system, and cabinet structural parts.
- Improper installation voids the warranty and may cause damage. A professional installer is recommended.
- Three installation options are available: undermount (recommended), flush-mount, and built-up. The latter two are not recommended.
Tools & Materials Required
- Safety Glasses ?
- Tape Measure ?
- Sealant ?
- Pencil or Marker ✏️
- Drill ?️
- Framing Square ?
- Equipment for Protection ?️
- Hacksaw/Jigsaw ?
- Basin Wrench ?
Preparation Steps
Prepare the Base Cabinet
Eridanus farmhouse sinks may require custom cabinetry. Build a plywood platform on a support frame inside the sink base cabinet. This platform must support the sink's weight and any attachments like garbage disposals. Ensure the top of the sink is flush against the bottom of the countertop and allow clearance for water supply lines and drains/garbage disposal.
Template and Cutout
No template is provided due to dimensional variations. Make the countertop cutout according to the installation option. Eridanus recommends a 1/4" reveal on 3 sides for undermount installations. Use the actual sink as a template guide. Center the sink, allow for faucets and backsplashes, and outline the sink for the cutout, including any desired reveal, before cutting.
Set the Sink
Test fit the sink in the prepared opening. The entire weight should be supported by the frame. Verify the sink is level with the cabinet top, using shims if necessary. Set the sink into the cabinet or countertop cutout. Apply sealant as a gasket between the sink and cabinet if needed. Clean the bottom of the countertop and the sink's top flange. Remove excess sealant with a recommended cleaner.
Lifetime Limited Warranty on Manufacturer Defects
Eridanus warrants to the original buyer that Eridanus kitchen sinks will be replaced or repaired, at Eridanus's option, without charge, if they fail under normal residential use due to a manufacturing defect for the lifetime of normal residential use.
This warranty is non-transferable and extended solely to the original buyer. Eridanus recommends installation by a licensed professional plumber or installer and is not responsible for damage or failure due to improper installation, misuse, or failure to use a licensed professional.
This Limited Warranty applies only to sinks manufactured and sold by Eridanus. It begins on the date of purchase and does not cover removal, installation, or freight costs.
This Limited Warranty does not apply to damage or malfunction caused by:
- Installation not in compliance with manufacturer's instructions.
- Failure to follow recommended instructions.
- Use of the product in a manner other than its intended use.
- Improper maintenance.
- Misuse or abuse of the product.
- Excessive use of chemicals, accidents, or other damages.
- Commercial use.
The invalidity, illegality, or unenforceability of any provision will not affect the validity, legality, or enforceability of the remaining provisions.
