LANDSCAPE Table Assembly Instructions
Model: 16300255/03
Manufacturer: BDSK Handels GmbH & Co. KG
Address: Mergentheimer Straße 59, DE-97084 Würzburg
Parts List
- Part A: Base plate with pre-drilled holes
- Part B: Table leg component
- Part C: Table leg component
- Part D: Screw (8x20MM-14)
- Part E: Screw (25MM-14)
- Part F: Allen key (5MM-L)
Assembly Steps
Estimated assembly time: 20 minutes.
Step 1: Attach components B and C to the base plate (A) using screws D and E. Use the provided Allen key (F) for tightening.
A visual representation shows the initial attachment of leg components to the base plate.
Step 2: Secure the assembled leg structure to the tabletop. The diagram indicates that the combined parts (A+B+C) along with screws (D+E+F) are used in this step.
A close-up view highlights the connection points and the use of screws and the Allen key.
Step 3: Complete the assembly by ensuring all connections are tight and the table is stable.
The final image shows the fully assembled Landscape table with its characteristic crossed leg design.
