Instructions for permobil models including: HMD Cushion Roho Quadtro Select, HMD, Cushion Roho Quadtro Select, Roho Quadtro Select, Quadtro Select, Select

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • References

File Info : application/pdf, 1 Pages, 491.42KB

This document is for clinician use only.

Optional setup with atmospheric inflation - ROHO® MOSAIC® cushion

IMPORTANT! A clinician who is experienced in seating and positioning should determine whether atmospheric inflation is appropriate for the individual's seating needs. For alternate inflation instructions and additional setup, safety, and care information, refer to the manual provided with the cushion and cover.
WARNING: DO NOT place any weight on the cushion during atmospheric inflation.

Inflate the cushion and deflate to atmospheric pressure.
1. Open the inflation valve. (Fig. 1) 2. Inflate with the hand pump until all of the air cells feel firm. 3. Remove the hand pump. Do not close the inflation valve. 4. Allow air to escape from the inflation valve. (Fig. 2)
Suggestion: Listen (or place your hand in front of the inflation valve) to confirm that deflation has stopped. 5. Close the inflation valve. (Fig. 3)
Finish setup.
1. Place the cushion on the seating surface, air cells facing up.
2. Transfer to the cushion.
3. Perform hand check.

Fig. 1

Fig. 2

Open Fig. 3 Close

WARNING: Clinician: If you are concerned about insufficient air between the individual and the base of the cushion, perform a hand check after atmospheric inflation, and adjust as needed. (Fig.4)
Fig. 4

ROHO, Inc. 1501 S 74th St, Belleville, IL 62223 USA USA: 800.736.0925 | orders.roho@permobil.com Canada: 800.265.9830 | sales.ca@permobil.com permobil.com

Products may be covered by one or more U.S. and foreign patents and trademarks, including MOSAIC®, Permobil® and ROHO®. © 2024 Permobil #AIG-MOS Rev. 2024-05-03



References

• Permobil