Overview
Thank you for choosing REXING! We hope you love your new product as much as we do.
If you need assistance, or have any suggestions to improve it, please contact us. You can reach us via care@rexingusa.com or call us at (203) 800-4466. Our support team will respond you as soon as possible.
Always a surprise in Rexing. Check us out here:
What's in the Box
The package for your Rexing V1 Basic Dash Cam includes the following items:
- Rexing V1 Basic Dash Cam
- Car Charger
- Dash Cam Mount Plate & 3M Adhesive
- Mini-USB Cable
- Cable Management Tool
- Cable Clips
- V1 Basic Quick Start Guide
- Safety Guide
Camera Overview
The Rexing V1 Basic dash cam has the following components:
- 1. Micro SD Card Slot
- 2. Power Button
- 3. Reset Button
- 4. Menu Button
- 5. Mode Button
- 6. REC (Record) Button
- 7. OK (Confirm) Button
- 8. MIC (Microphone) Button
- 9. Screen Button
- 10. Mini-USB Port
- 11. GPS Logger Port
- 12. Rear Camera Port (Not Supported)
- 13. Lens Angle Adjustment
LED Indicator Status:
- The camera is recording when the LED is flashing red.
- The device is charging or powered on when the LED is solid blue.
Installation
Step 1: Install the Dash Cam
Place the 3M adhesive on the mount and properly orient the mount square to the roof and hood line of the vehicle. Ensure the T-interlock on the mount is oriented correctly. Firmly press the mount onto the windshield. Wait at least 20 minutes before mounting the camera.
[Illustration: Shows the correct orientation of the mount on the windshield.]
Step 2: Insert the Memory Card
The Rexing V1 Basic accepts Micro SD memory cards up to 256 GB (Class 10/ UHS-1 or higher). You must insert a memory card before you can begin recording. Ensure the device is powered down before inserting or removing a memory card.
Gently push the memory card in until you hear a click. The spring release will then push the card out.
Step 3: Power the Camera and Format the Memory Card
Power the camera by connecting the charger to the car cigarette lighter and the camera. The camera will automatically start recording when powered on.
To ensure the V1 Basic records properly and without error, you must format any new memory card within the camera using the format function. Always back up important data stored on the memory card before formatting.
To format the memory card: Ensure the memory card is inserted, then turn on the device by connecting to a power source. Press the REC button to stop recording. Press the MENU button twice to enter the System Setup Menu. Use the REC and MIC buttons to navigate to the Format setting. Press the OK Button to confirm the selection.
[Illustration: Shows the System Setup Menu with 'Format' highlighted, and a confirmation screen stating "All data will be deleted" with Cancel and OK options.]
Step 4: Installing the Camera onto the Windshield
Place the camera on the mount and carefully route the power cable around the windscreen and tuck it under the trim. Plug the Car Charger Cable into a 12V DC power outlet or the car cigarette lighter. Connect the car charger to the camera. The camera will auto-start recording once powered on.
[Illustration: Depicts routing the power cable from the cigarette lighter to the dash cam, and connecting the mini-USB cable to the dash cam.]
Basic Operation
Device Power
The device automatically powers on when plugged into a 12V accessory socket or cigarette lighter and receives power (e.g., when the vehicle is started). To turn the device on manually, press and hold the POWER button until the welcome screen appears. The camera will automatically start recording when powered on.
[Illustration: Shows the POWER button on the side of the camera.]
Menu Settings
To access menu settings: Power on the camera. If it is recording, press the REC button to stop. Press the MODE button to toggle to the desired mode. Press the MENU button once to enter the Mode settings menu. Press the MENU button twice to enter the System Settings.
[Illustration: Shows the camera screen displaying the System Settings menu with options like Resolution, Loop recording, Time-lapse Record, WDR. Icons for System and Video Mode are indicated.]
Video Recording: The camera automatically starts recording when the device receives power. The LED lights and a red dot will blink when the device is recording. Press the REC button to stop recording.
Video Playback: Playback of videos can be done on the device or a computer. If you have purchased a Rexing GPS Logger, you may play back recordings in a specialized application.
[Illustration: Shows the camera in playback mode.]
Playback on Device
To playback a video on the device, toggle to the Playback mode. Use the REC and MIC buttons to toggle to the desired video. Press the OK button to play.
During playback, use the OK (pause), MIC (fast forward), and REC (rewind) buttons to control the video playback.
Playback on Computer
To playback videos on a computer, you can either use an SD card adapter or connect the device directly to the computer using the USB to Mini B 5pin male cable.
Using an SD Card Adapter: Remove the memory card from the camera and insert it into an SD card adapter. Place the adapter into your computer's card reader.
Using a USB Cable: Connect the USB to Mini B 5pin Male Cable to the device and the USB connector to the computer. After the device powers up, press the OK Button to select "Mass Storage". On the computer, navigate to the device drive. Videos are stored at: \CARDV\MOVIE. Select the video to playback.
[Illustration: Shows connecting the USB cable to the computer and selecting "Mass Storage" on the device's screen.]
Parking Monitor
You can enable the parking monitor function through the setup option.
GPS Logger
(Requires separate purchase. ASIN: B08CZDXVLJ)
When connected to the camera, the GPS logger will record the speed and location of your vehicle as you drive. You can access this information while playing back your recordings using the GPS Video player (available for Windows and Mac at rexingusa.com).
Press the MENU button twice to enter System Settings. Toggle to the GPS Speed Unit setting and select your preferred speed unit.
After a GPS signal is found, the screen icon will turn from blue to green.
Please visit gpsa.rexingusa.com to watch a video tutorial.
[Illustrations: Show GPS signal status - not connected, searching, active.]
Taking Photos
To take a photo, stop video recording and toggle to the Photo Mode. Press the OK Button to take a photo.
To view a photo, stop video recording and toggle to the Playback Mode. Press the REC and MIC Buttons to toggle through your photos.
To delete a photo, stop video recording and toggle to the Playback Mode. Navigate to the photo you want to delete. Press the MENU button once and toggle to the Delete option. Press the OK Button and select "Delete Current" or "Delete All".
[Illustration: Shows the camera in photo viewing mode and the delete options.]
Compliance Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
Certifications: FC, ROHS, CE
Manufactured: MADE IN CHINA
HomePage
Login • Instagram
Rexing Product Reg II
