Bulletin 1492: IEC Terminal Block Accessories - Marking Systems

Marking Solutions

Marking Solutions from Rockwell Automation enable efficient identification of terminal blocks and other components. The Allen-Bradley ClearMark™ Printer provides quality printing for high-volume users. The X-Y Plotter allows for flexible marking. Low-volume marking needs are supported by pre-printed and custom markers.

ClearMark Printer and Accessories

The ClearMark Printer provides quality printing in an easy-to-use format for high-volume marking needs. Used with Allen-Bradley ClearTools™ software, customers can create markers with basic numbering to sequences and images.

Features:

Fast: Less than two minutes to print and set a full card
Easy: Integrated feeder for up to 20 marker cards
Low-maintenance: Will automatically cycle as needed to keep ink flowing
Quality printing: 600 or 1200 dpi
Color printing: Use spot color printing on white marker cards for visual distinction

System Requirements:

Operating system: Microsoft Windows 2000, XP or Vista
Memory: 64 MB RAM
Hard drive: 90 MB available space
Processor: Pentium III or comparable
Graphics: 800x600 pixels with 256 colors (ideal 1024x768 with 16-bit high color)

Description	Pkg. Qty.	Cat. No.
ClearMark Printer, 110V Includes ClearMark Printer, ClearTools Software and first set of ink	1	1492-PRINT110
ClearMark Printer Ink Cartridge, Cyan	1	1492-PRINTINK-C
ClearMark Printer Ink Cartridge, Magenta	1	1492-PRINTINK-M
ClearMark Printer Ink Cartridge, Yellow	1	1492-PRINTINK-Y
ClearMark Printer Ink Cartridge, Black	1	1492-PRINTINK-K
ClearMark Printer Replacement Ink Collector Unit	1	1492-PRINTCOLLECT

X-Y Plotter and Accessories

The flexible marking tool of the Allen-Bradley terminal block product line is the X-Y Plotter.

Features:

Plot partial marker cards
Load up to five cards at a time (mix and match)
Easy to use AB-Plot software

System Requirements:

Operating system: Microsoft Windows 98
Hard drive: 50 MB available space
Processor: 80486
Parallel or USB communication port

Description	Pkg. Qty.	Cat. No.
Plotter Kit Includes Series E Plotter, 1492-PLOTPEN25 ink pen, 1492-PLOTPLT plate, communication cables, user manuals, ABPLOT software, and power adaptor.	1	1492-PLTKIT
Plotter Pen Disposable pen, 0.25 mm tip	1	1492-PLOTPEN25
Plotter Pen Disposable pen, 0.35 mm tip	1	1492-PLOTPEN35
Plotter Pen Disposable pen, 0.25 mm tip, slow-drying ink	1	1492-PLOTPEN25S
ABPLOT Plotter software CD ROM - also available online at www.ab.com	1	1492-PLOTSOFT
Plotter Ink Cartridge Requires 1492-PLPEN	5	1492-PLINKCART
Refillable pen Requires 1492-PLINKCART	1	1492-PLPEN
Pen Adaptor Adaptor for ultra fine Sharpie pens, includes 1 pen	1	1492-PLOTADPT
Cleaning Solution Used to unclog 1492-PLPEN, requires 1492-PLCLEAN	1	1492-PLSOLN
Cleaning Kit Container and cloth to unclog 1492-PLPEN, requires 1492-PLSOLN	1	1492-PLCLEAN
Service Kit Inserts and cleaning pads to replace in pen station	1	1492-PLOTSERV
Series E Adapter Plate (additional) 1 plate is already included with the Plotter kit	1	1492-PLOTPLT
Adaptor Plate For oversized markers (1492-MW5-21, -MW6-21, and MW7-21)	1	1492-PLOTPLTA

Blank Markers

Photo	For Use With	Markers per Card	Marker Size	Pkg. Qty.	Cat. No.
Snap-In Individual Markers (1492-M)
[Image: Snap-In Individual Markers 1492-M]	1492-L	100	3 x 5 mm	5	1492-M3X5
[Image: Snap-In Individual Markers 1492-M]	1492-L	120	3 x 12 mm	5	1492-M3X12
[Image: Snap-In Individual Markers 1492-M]	1492-J, L	200	5 x 5 mm	5	1492-M5X5
[Image: Snap-In Individual Markers 1492-M]	1492-J, L	144	5 x 8 mm	5	1492-M5X8
[Image: Snap-In Individual Markers 1492-M]	1492-J, L	144	5 x 10 mm	5	1492-M5X10
[Image: Snap-In Individual Markers 1492-M]	1492-J, L	144	5 x 12 mm	5	1492-M5X12
[Image: Snap-In Individual Markers 1492-M]	1492-J, L	96	5 x 15 mm	5	1492-M5X15
[Image: Snap-In Individual Markers 1492-M]	1492-J, L	20	5 x 30 mm	5	1492-M5X30
[Image: Snap-In Individual Markers 1492-M]	1492-J, L	200	6 x 5 mm	5	1492-M6X5
[Image: Snap-In Individual Markers 1492-M]	1492-J, L	120	6 x 10 mm	5	1492-M6X10
[Image: Snap-In Individual Markers 1492-M]	1492-J, L	120	6 x 12 mm	5	1492-M6X12
[Image: Snap-In Individual Markers 1492-M]	1492-J, L	108	7 x 12 mm	5	1492-M7X12
[Image: Snap-In Individual Markers 1492-M]	1492-J, L	160	8 x 5 mm	5	1492-M8X5
[Image: Snap-In Individual Markers 1492-M]	NEMA (1492-HM1, -HM2, -HM3) Terminal Blocks, 1492-CB Circuit Breakers	120	6 x 10 mm	5	1492-MN81
[Image: Snap-In Individual Markers 1492-M]	NEMA (1492-HM3) Terminal Blocks, 1492-CB Circuit Breakers	40	10 x 10 mm	5	1492-MN83
[Image: Snap-In Individual Markers 1492-M]	1492-W,R, 700-HA Relays	56	8 x 9 mm	5	1492-MS8X9
[Image: Snap-In Individual Markers 1492-M]	700-HN204, -HN205, Relay Sockets	56	8 x 12 mm	5	1492-MS8X12
[Image: Snap-In Individual Markers 1492-M]	1667 PanelConnect™	40	8 x 17 mm	5	1492-MS8X17
[Image: Snap-In Individual Markers 1492-M]	100-C, -D Contactors, 700-CF Relays, 140 Circuit Breakers, 193-E1, -E3	40	9 x 20 mm	5	1492-MS9X20
[Image: Snap-In Individual Markers 1492-M]	100-C, -D Contactors, 700-CF Relays, 140 Circuit Breakers, 193-E1, -E3	40	10 x 17 mm	5	1492-MS10X17
Snap-In Linked Markers (1492-MR)
[Image: Snap-In Linked Markers 1492-MR]	1492-J, -L	120	5 x 8 mm	5	1492-MR5X8
[Image: Snap-In Linked Markers 1492-MR]	1492-WM3, -WMD1	120	6 x 8 mm	5	1492-MR6X8
[Image: Snap-In Linked Markers 1492-MR]	1492-W, 700-HA, 800F Contact Block	120	5 x 12 mm	5	1492-MR5X12
[Image: Snap-In Linked Markers 1492-MR]	1492-W, 700-H Relays	120	6 x 12 mm	5	1492-MR6X12
[Image: Snap-In Linked Markers 1492-MR]	1492-W, -R, 700-H Relays	84	8 x 12 mm	5	1492-MR8X12
[Image: Snap-In Linked Markers 1492-MR]	1492-W, 700-H Relays	80	5 x 5 mm	5	1492-MS5X5
[Image: Snap-In Linked Markers 1492-MR]	1492-W, 700-H Relays	80	5 x 9 mm	5	1492-MS5X9
[Image: Snap-In Linked Markers 1492-MR]	1492-W, 700-H Relays	80	5 x 12 mm	5	1492-MS5X12
[Image: Snap-In Linked Markers 1492-MR]	1492-W, 700-H Relays	80	6 x 9 mm	5	1492-MS6X9
[Image: Snap-In Linked Markers 1492-MR]	1492-W, 700-H Relays	80	6 x 12 mm	5	1492-MS6X12
Snap-In Hinged Markers
[Image: Snap-In Hinged Markers]	1492-L	96	5 x 10 mm	5	1492-MH5X10
[Image: Snap-In Hinged Markers]	1492-L	96	5 x 15 mm	5	1492-MH5X15
[Image: Snap-In Hinged Markers]	1492-L	80	6 x 12 mm	5	1492-MH6X12
Cable Markers (1492-MW)
[Image: Cable Markers 1492-MW]	External Diameter (mm) from 0.276 in. (from 7.0 mm)	32	9 x 24 mm*	5	1492-MW9X24
[Image: Cable Markers 1492-MW]	from 0.276 in. (from 7.0 mm)	32	5 x 23 mm*	5	1492-MW10X23
[Image: Cable Markers 1492-MW]	from 0.276 in. (from 7.0 mm)	32	8 x 23 mm*	5	1492-MW14X23
[Image: Cable Markers 1492-MW]	from 0.276 in. (from 7.0 mm)	32	11 x 44 mm*	5	1492-MW11X60
[Image: Cable Markers 1492-MW]	0.162...0.193 in. (41...4.9 mm)	32	5 x 21 mm‡	5	1492-MW5-21
[Image: Cable Markers 1492-MW]	0.185...0.229 (0.268) in. (4.7...5.8 [6.8] mm)	32	6 x 21 mm‡	5	1492-MW6-21
[Image: Cable Markers 1492-MW]	0.229...0.276 (0.335) in. (5.8...7.0 [8.5] mm)	32	7 x 21 mm‡	5	1492-MW7-21

* Requires cable ties. 1 Requires Cat. No. 1492-GMC. ‡ Requires Cat. No. 1492-PLOTPLTA.

Blank Markers, Continued

Photo	For Use With	Markers per Card	Marker Size	Pkg. Qty.	Cat. No.
Self-Adhesive Markers (1492-MAS)
[Image: Self-Adhesive Markers 1492-MAS]	Self-adhesive for any equipment	40	9 x 17 mm	5	1492-MAS9X17
[Image: Self-Adhesive Markers 1492-MAS]	Bul. No. relays, self-adhesive for any equipment	40	6 x 15 mm	5	1492-MAS6X15
[Image: Self-Adhesive Markers 1492-MAS]	1760-PICO GFX-70 Cont., self-adhesive for any equipment	40	9 x 11 mm	5	1492-MAS9X11
Wire Markers (1492-MWC)
[Image: Wire Markers 1492-MWC]	0.059...0.098 in. (2.0...3.5 mm)/White	40	4.25 x 21 mm	5	1492-MWC1-21
[Image: Wire Markers 1492-MWC]	0.078...0.138 in. (2.0...5.0 mm)/White	40	4.25 x 21 mm	5	1492-MWC3-21
[Image: Wire Markers 1492-MWC]	0.098...0.197 in. (2.0...5.0 mm)/White	24	6 x 21 mm	5	1492-MWC4-21
[Image: Wire Markers 1492-MWC]	0.059...0.098 in. (1.5...2.5 mm)/White	40	4.25 x 12 mm	5	1492-MWC1-12
[Image: Wire Markers 1492-MWC]	0.078...0.138 in. (2.0...3.5 mm)/White	40	4.25 x 12 mm	5	1492-MWC3-12
[Image: Wire Markers 1492-MWC]	0.098...0.197 in. (2.0...5.0 mm)/White	24	6 x 12 mm	5	1492-MWC4-12
Snap-In Individual Markers for Rockwell Automation products and Competitive Terminal Blocks (1492-MC)
[Image: Snap-In Individual Markers 1492-MC]	Wago	100	4 x 9 mm	5	1492-MCW4X9
[Image: Snap-In Individual Markers 1492-MC]	Phoenix, Entrlec, Telemecanique, Legrand	120	5 x 8 mm	5	1492-MC5X8
[Image: Snap-In Individual Markers 1492-MC]	Wieland and Telemecanique	100	5 x 12 mm	5	1492-MC5X12
[Image: Snap-In Individual Markers 1492-MC]	Entrelec and Wieland terminals	100	5 x 9 mm	5	1492-MCW5X9F
[Image: Snap-In Individual Markers 1492-MC]	1492-MC5X10 for Phoenix, Wago	100	5 x 9 mm	5	1492-MCW5X5
[Image: Snap-In Individual Markers 1492-MC]	Wago	100	5 x 5 mm	5	1492-MCW6X9
[Image: Snap-In Individual Markers 1492-MC]	Wago	100	4 x 5 mm	5	1492-MC4X5
[Image: Snap-In Individual Markers 1492-MC]	Phoenix	100	5 x 5 mm	5	1492-MC5X5
[Image: Snap-In Individual Markers 1492-MC]	Bul. No. 1492-FB fuse holder and Phoenix	100	6 x 5 mm	5	1492-MC6X5
[Image: Snap-In Individual Markers 1492-MC]	Bul. No. 1492-FB fuse holder and Phoenix	120	6 x 10 mm	5	1492-MC6X10
[Image: Snap-In Individual Markers 1492-MC]	Bul. No. 700-HL relays, and Phoenix, Wieland, Entrelec, Telemacanique, Legrand	100	8 x 10 mm	5	1492-MC6X10
[Image: Snap-In Individual Markers 1492-MC]	Phoenix and Entrelec	100	7 x 5 mm	5	1492-MC7X5
[Image: Snap-In Individual Markers 1492-MC]	Phoenix	100	5 x 4 mm	5	1492-MC5X4
[Image: Snap-In Individual Markers 1492-MC]	Phoenix	64	7 x 10 mm	5	1492-MCS7X10
[Image: Snap-In Individual Markers 1492-MC]	Siemens	64	6 x 10 mm	5	1492-MCS6X10
[Image: Snap-In Individual Markers 1492-MC]	Siemens	80	5 x 10 mm	5	1492-MCS5X10
[Image: Snap-In Individual Markers 1492-MC]	Siemens	64	7 x 7 mm	5	1492-MCS7X7
[Image: Snap-In Individual Markers 1492-MC]	Siemens	80	5 x 8 mm	5	1492-MCS5X8
[Image: Snap-In Individual Markers 1492-MC]	Siemens	64	6 x 8 mm	5	1492-MCS6X8

1492 Pre-Printed Markers

Pre-printed markers are packaged in quantities of 5 with a minimum order quantity of 5 cards.

Catalog Number Explanation

1492 - M5x10 - H - 1-100

a: Marker Selection (e.g., M5x10)

b: Text Direction (e.g., H for Horizontal)

c: Printing Selection (e.g., 1-100 for sequential numbering)

Marker Selection Table:

Code	Description
M3x5	M3x12	MCS6X8
M3x12	MS6X12	MC6X10
M5x5	MS8X9	MCW1-12
M5x8	MS8X12	MCW3-12
M5x10	MS9X20	MCW4-12
M5x12	MS8X17	MAS9X17
M5x15	MS10X17	MAS6X15
M5X30	MC5X8	MAS9X11
M6x5	MC5X10	MW9X24
M6x10	MC5X12	MW10X23
M6x12	MCW4X9	MW14X23
M7x12	MCW5X9	MW11X60
M8x5	MCW5X9F	MW5-21
MR5X8	MCW5X5	MW6-21
MR6X8	MCW6X9	MW7-21
MR5X12	MC4X5	MWC1-21
MR6X12	MC5X5	MWC3-21
MR8x12	MC6X5	MWC4-21
MH5X10	MC8X10	MWC1-12B
MH5X15	MC7X5	MWC1-12R
MH6X12	MC5X4	MWC1-12Y
MMN81	MCS7X10	MWC3-12B
MN83	MCS5X10	MWC3-12R
MS5x5	MCS6X10	MWC3-12Y
MS5x9	MCS7X7	MWC4-12B
MS5X12	MCS5X8	MWC4-12R
		MWC4-12Y

Text Direction Table:

Code	Description
H	Horizontal Print
V	Vertical Print
HU	Horizontal Upside-down Print
VU	Vertical Upside-down Print
HR	Horizontal Print, reversed data for each column
VR	Vertical Print, reversed data for each column
HUR	Horizontal Upside-down Print, reversed data for each column
VUR	Vertical Upside-down Print, reversed data for each column
C	Custom

Printing Selection Table:

Printing Selection	Description
Straight Fill Printing
1-End	Sequential printing to end of card
L	Continuous printing "L" on card
L1	Continuous printing "L1" on card
L2	Continuous printing "L2" on card
L3	Continuous printing "L3" on card
U	Continuous printing "U" on card
V	Continuous printing "V" on card
W	Continuous printing "W" on card
PE	Continuous printing "PE" on card
GND	Continuous printing "GND" on card
Repeat Sequence Printing
1-10 -or- 11-20 -or- 21-30 -or- ... -or- 491-500	Block of 10 sequential numbering. Blocks of 10 within a range from 1...500.
1-20 -or- 21-40 -or- 41-60 -or- ... -or- 481-500	Block of 20 sequential numbering. Blocks of 20 within a range from 1...500.
1-50 -or- 51-100 -or- 101-150 -or- ... -or- 451-500	Block of 50 sequential numbering. Blocks of 50 within a range from 1...500.
1-100 -or- 101-200 -or- ... -or- 401-500	Block of 100 sequential numbering. Blocks of 100 within a range from 1...500.
Single Sequence Printing
1-10S -or- 11-20S -or- 21-30S -or- ... -or- 491-500S	Block of 10 sequential numbering. Blocks of 10 within a range from 1...500.
1-20S -or- 21-40S -or- ... -or- 481-500S	Block of 20 sequential numbering. Blocks of 20 within a range from 1...500.
1-50S -or- 51-100S -or- ... -or- 451-500S	Block of 50 sequential numbering. Blocks of 50 within a range from 1...500.
1-100S -or- 101-200S -or- ... -or- 401-500S	Block of 100 sequential numbering. Blocks of 100 within a range from 1...500.

Custom Printed Marker Cards

Download the AB-Print software (AB-Print) from the Allen-Bradley terminal block home page (http://www.ab.com/industrialcontrols/products/) and install it.
Create your custom marker card using the AB-Print software and save your file.
Place the custom order by adding the letter "C" to the end of the marker cat. no. (Example: If the custom marker that was created in Step 2 is Cat. No. 1492-M6X12, an order will be placed with the new Cat. No. 1492-M6X12C.) Then, document the order number for Step 4.
E-mail the custom marker file to RAMilwCustomMarkers@ra.rockwell.com. Include the following items:
- Allen Bradley order number (in the subject of the e-mail)
- Created file (attached to the e-mail)
- Quantity (the number of needed copies of the file)
- Company information (with a contact name and number in the e-mail)

Note: Minimum quantity is 1 card per order.

Electrical Warning Plate Markers

Photo	For Use With	Color	Pkg. Qty.	Cat. No.
[Image: Electrical Warning Plate Marker]	1492-J	Yellow	25	1492-EWPJ5
[Image: Electrical Warning Plate Marker]	1492-J	Yellow	50	1492-EWPJ8
[Image: Electrical Warning Plate Marker]	1492-J	Yellow	50	1492-EWPJ12
[Image: Electrical Warning Plate Marker]	1492-J	Yellow	50	1492-EWPJ18
[Image: Electrical Warning Plate Marker]	1492-L	Yellow	20	1492-EWPL5
[Image: Electrical Warning Plate Marker]	1492-L	Yellow	20	1492-EWPL6
[Image: Electrical Warning Plate Marker]	1492-L	Yellow	20	1492-EWPL8
[Image: Electrical Warning Plate Marker]	1492-L	Yellow	20	1492-EWPL10
[Image: Electrical Warning Plate Marker]	1492-L	Yellow	20	1492-EWPL12
[Image: Electrical Warning Plate Marker]	1492-L	Yellow	20	1492-EWPL16
[Image: Electrical Warning Plate Marker]	1492-L	Yellow	20	1492-EWPL4
[Image: Electrical Warning Plate Marker]	1492-W	Yellow	10	1492-EWP5
[Image: Electrical Warning Plate Marker]	1492-W	Yellow	10	1492-EWP5-4
[Image: Electrical Warning Plate Marker]	1492-W	Yellow	10	1492-EWP6
[Image: Electrical Warning Plate Marker]	1492-W	Yellow	10	1492-EWP6-4
[Image: Electrical Warning Plate Marker]	1492-W	Yellow	10	1492-EWP7
[Image: Electrical Warning Plate Marker]	1492-W	Yellow	10	1492-EWP7-4
[Image: Electrical Warning Plate Marker]	1492-W	Yellow	10	1492-EWP8
[Image: Electrical Warning Plate Marker]	1492-W	Yellow	10	1492-EWP8-4
[Image: Electrical Warning Plate Marker]	1492-W	Yellow	10	1492-EWP11
[Image: Electrical Warning Plate Marker]	1492-W	Yellow	10	1492-EWP11-4

Screw Connection Terminal Blocks - Standard Feed-Through Blocks

1492-J3, 1492-J4, 1492-J6

Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.

Specifications:

Certifications	CSA	IEC	ATEX	CSA	IEC	ATEX	CSA	IEC	ATEX
Voltage Rating	600V AC/DC	800V AC/DC	550V AC/DC	600V AC/DC	800V AC/DC	690V AC/DC	600V AC/DC	800V AC/DC	550V AC/DC
Maximum Current	25 A	20 A	24 A	35 A	25 A	32 A	50 A	41 A	36 A
Wire Range (Rated Cross Section)	#22...12 AWG	#26...12 AWG	2.5 mm²	#22...10 AWG	#26...10 AWG	4 mm²	#22...8 AWG	6 mm²	6 mm² (#20...10 AWG)
Wire Strip Length	0.39 in. (10 mm)	0.39 in. (10 mm)	0.47 in. (12 mm)
Recommended Tightening Torque	4.5...7.1 lb·in (0.5...0.8 N·m)	9.0 lb·in (1.0 N·m)	14.2 lb·in (1.6 N·m)
Density	59 pcs/ft (196 pcs/m)	49 pcs/ft (163 pcs/m)	37 pcs/ft (123 pcs/m)
Housing Temperature Range	-58...+248 °F (-50...+120 °C)	-58...+248 °F (-50...+120 °C)	-58...+248 °F (-50...+120 °C)
Short-Circuit Current Rating	See page 12-42	See page 12-42	See page 12-42

Terminal Blocks:

Color:	Cat. No.	Pkg. Qty.	Cat. No.	Pkg. Qty.	Cat. No.	Pkg. Qty.
Grey	1492-J3	100	1492-J4	100	1492-J6	100
Red	1492-J3-RE	100	1492-J4-RE	100	1492-J6-RE	100
Blue	1492-J3-B	100	1492-J4-B	100	1492-J6-B	100
Black	1492-J3-BL	100	1492-J4-BL	100	1492-J6-BL	100
Green	1492-J3-G	100	1492-J4-G	100	1492-J6-G	100
Yellow	1492-J3-Y	100	1492-J4-Y	100	1492-J6-Y	100
Orange	1492-J3-OR	100	1492-J4-OR	100	1492-J6-OR	100
Brown	1492-J3-BR	100	1492-J4-BR	100	1492-J6-BR	100
White	1492-J3-W	100	1492-J4-W	100	1492-J6-W	100
Violet	1492-J3-V	100	1492-J4-V	100	1492-J6-V	100

Accessories:

Mounting Rails:	Cat. No.	Pkg. Qty.	Cat. No.	Pkg. Qty.	Cat. No.	Pkg. Qty.
1 m Symmetrical DIN (Steel)	199-DR1	10	199-DR1	10	199-DR1	10
1 m Symmetrical DIN (Aluminum)	1492-DR5	10	1492-DR5	10	1492-DR5	10
1 m Hi-Rise Sym. DIN (Aluminum)	1492-DR6	2	1492-DR6	2	1492-DR6	2
1 m Angled Hi-Rise Sym. DIN (Steel)	1492-DR7	2	1492-DR7	2	1492-DR7	2
End Barriers
Grey	1492-EBJ3	50	1492-EBJ3	50	1492-EBJ3	50
Blue	1492-EBJ3-B	50	1492-EBJ3-B	50	1492-EBJ3-B	50
Yellow	1492-EBJ3-Y	50	1492-EBJ3-Y	50	1492-EBJ3-Y	50
End Anchors and Retainers:
DIN Rail -- Normal Duty	1492-EAJ35	100	1492-EAJ35	100	1492-EAJ35	100
DIN Rail -- Heavy Duty	1492-EAHJ35	50	1492-EAHJ35	50	1492-EAHJ35	50
Screwless End Retainer	1492-ERL35	20	1492-ERL35	20	1492-ERL35	20
Jumpers:*
Screw Center Jumper -- 10-pole	1492-CJJ5-10	20	1492-CJJ6-10	20	1492-CJJ8-10	20
Screw Center Jumper -- 4-pole	1492-CJJ5-4	50	1492-CJJ6-4	50	1492-CJJ8-4	50
Screw Center Jumper -- 3-pole	1492-CJJ5-3	50	1492-CJJ6-3	50	1492-CJJ8-3	50
Screw Center Jumper -- 2-pole	1492-CJJ5-2	50	1492-CJJ6-2	50	1492-CJJ8-2	50
Plug-in Center Jumper -- 50-Pole	1492-CJLJ5-50	10	1492-CJLJ6-41 (41-pole)	10
Plug-in Center Jumper -- 10-Pole	1492-CJLJ5-10	20	1492-CJLJ6-10	20
Plug-in Center Jumper -- 9-Pole	1492-CJLJ5-9	20
Plug-in Center Jumper -- 8-Pole	1492-CJLJ5-8	20
Plug-in Center Jumper -- 7-Pole	1492-CJLJ5-7	20
Plug-in Center Jumper -- 6-Pole	1492-CJLJ5-6	20
Plug-in Center Jumper -- 5-Pole	1492-CJLJ5-5	20
Plug-in Center Jumper -- 4-Pole	1492-CJLJ5-4	60	1492-CJLJ6-4	60
Plug-in Center Jumper -- 3-Pole	1492-CJLJ5-3	60	1492-CJLJ6-3	60
Plug-in Center Jumper -- 2-Pole	1492-CJLJ5-2	60	1492-CJLJ6-2	60
Insulated Side Jumper -- 24-Pole	1492-SJ5B-24	50
Insulated Side Jumper -- 10-Pole	1492-SJ5B-10	50
Screw Type Jumper Notching Tool	1492-T1	1	1492-T1	1	1492-T1	1
Other Accessories:
Partition Plate	1492-EBJ16	20	1492-EBJ16	20	1492-EBJ16	20
Test Plug Socket	1492-TPS23	20	1492-TPS23L	50
Test Plug	1492-TP23	20	1492-TP23	20	1492-TP23	20
Test Plug (Stackable)	1492-TPJ5	25	1492-TPJ6	25
Electrical Warning Plate	1492-EWPJ5	25	1492-EWPJ5	25	1492-EWPJ8	50
Marking Systems:
Snap-in Marker Cards	1492-M5X12 (144/card)	5	1492-M6X12 (120/card)	5	1492-MR8X12 (84/card)	5
Snap-in Marker Cards	1492-M5X5 (200/card)	5	1492-M6X5 (200/card)	5	1492-M8X5 (160/card)	5

* Use of center jumpers may affect spacings, requiring derating of terminal blocks. See page 12-83 for details.

Screw Connection Terminal Blocks - Standard Feed-Through Blocks

1492-J50, 1492-J70, 1492-J120

Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.

Specifications:

Certifications	CSA	IEC	ATEX	CSA	IEC	ATEX	CSA	IEC
Voltage Rating	1000V AC/DC	600V AC/DC	1000V AC/DC	690V AC/DC	1000V AC/DC
Maximum Current	150 A	126 A	150 A	175 A	205 A	192 A	228 A	220 A	269 A
Wire Range (Rated Cross Section)	#10...1/0 AWG	#10...1/0 AWG	50 mm²	#6...2/0 AWG	70 mm²	#8...2/0 AWG	70 mm²	#4...3/0 AWG	#4...4/0 AWG
Wire Strip Length	0.94 in. (24 mm)	0.87 in. (22 mm)	1.06 in. (27 mm)
Recommended Tightening Torque	31.5 lb·in (3.6 N·m)	87.0 lb·in (9.8 N·m)	141.6 lb·in (16.0 N·m)
Density	16 pcs/ft (54 pcs/m)	14 pcs/ft (48 pcs/m)	11 pcs/ft (37 pcs/m)
Housing Temperature Range	-58...+248 °F (-50...+120 °C)	-58...+248 °F (-50...+120 °C)	-58...+248 °F (-50...+120 °C)
Short-Circuit Current Rating	See page 12-42	See page 12-42	See page 12-42

Terminal Blocks:

Color:	Cat. No.	Pkg. Qty.	Cat. No.	Pkg. Qty.	Cat. No.	Pkg. Qty.
Grey	1492-J50	10	1492-J70	10	1492-J120	5
Blue	1492-J50-B	10	1492-J70-B	10	1492-J120-B	5

Accessories:

Mounting Rails:	Cat. No.	Pkg. Qty.	Cat. No.	Pkg. Qty.	Cat. No.	Pkg. Qty.
1 m Symmetrical DIN (Steel)	199-DR1	10	199-DR1	10
1 m Symmetrical Heavy Duty DIN (Steel, Unslotted)	199-DR4	5	199-DR4	5	199-DR4	5
1 m Symmetrical DIN (Aluminum)	1492-DR5	10	1492-DR5	10
1 m Hi-Rise Sym. DIN (Aluminum)	1492-DR6	2	1492-DR6	2
1 m Angled Hi-Rise Sym. DIN (Steel)	1492-DR7	2	1492-DR7	2
1 m Symmetrical Heavy Duty DIN (Copper, Unslotted)	1492-DR8	5	1492-DR8	5	1492-DR8	5
1 m Symmetrical Heavy Duty DIN (Steel)	1492-DR9	5	1492-DR9	5	1492-DR9	5
End Barriers	Not Required		Not Required		Not Required
End Anchors:
DIN Rail -- Heavy Duty	1492-EAHJ35	50	1492-EAHJ35	50	1492-EAHJ35	50
Jumpers:
Screw Center Jumper -- 4-pole	1492-CJJ18-4	10	1492-CJJ20-4	5	1492-CJJ27-4	5
Screw Center Jumper -- 3-pole	1492-CJJ18-3	10	1492-CJJ20-3	5	1492-CJJ27-3	5
Screw Center Jumper -- 2-pole	1492-CJJ18-2	10	1492-CJJ20-2	5	1492-CJJ27-2	5
Other Accessories:
Control Circuit Tap*	1492-J50A	5	1492-J70A	5	1492-J120A	5
Electrical Warning Plate	1492-EWPJ18	50	1492-EWPJ18	50
Marking Systems:
Snap-in marker cards	1492-M7X12 (108/card)	5	1492-M7X12 (108/card)	5	1492-MR8X12 (84/card)	5
Snap-in marker cards	1492-M5X5 (200/card)	5	1492-M5X5 (200/card)	5	1492-M7X12 (108/card)	5

* Auxiliary connection, allowing a single additional #26...8 AWG wire connection.

Screw Connection Terminal Blocks - Grounding Blocks

1492-JG6, 1492-JG10

Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.

Specifications:

Certifications	CSA	IEC	ATEX	CSA	IEC	ATEX
Voltage Rating
Maximum Current
Wire Range (Rated Cross Section)	#22...8 AWG	6 mm²	6 mm² (#20...10 AWG)	#16...6 AWG	10 mm²	10 mm² (#16...8 AWG)
Wire Strip Length	0.47 in. (12 mm)	0.47 in. (12 mm)
Recommended Tightening Torque	14.2 lb·in (1.6 N·m)	20.4 lb·in (2.3 N·m)
Mounting Torque -- Center Screw	4.4...8.9 lb·in (0.5...1.0 N·m)	4.4...8.9 lb·in (0.5...1.0 N·m)
Density	37 pcs/ft (123 pcs/m)	30 pcs/ft (100 pcs/m)
Housing Temperature Range	-58...+248 °F (-50...+120 °C)	-58...+248 °F (-50...+120 °C)
Short-Circuit Current Rating	See page 12-42	See page 12-42

Terminal Blocks:

Color:	Cat. No.	Pkg. Qty.	Cat. No.	Pkg. Qty.
Green/Yellow	1492-JG6	50	1492-JG10	50

Accessories:

Mounting Rails:	Cat. No.	Pkg. Qty.	Cat. No.	Pkg. Qty.
1 m Symmetrical DIN (Steel)	199-DR1	10	199-DR1	10
1 m Symmetrical DIN (Aluminum)	1492-DR5	10	1492-DR5	10
1 m Hi-Rise Sym. DIN (Aluminum)	1492-DR6	2	1492-DR6	2
1 m Angled Hi-Rise Sym. DIN (Steel)	1492-DR7	2	1492-DR7	2
End Anchors and End Retainers:
Screwless End Retainer	1492-ERL35	20	1492-ERL35	20
DIN Rail -- Normal Duty	1492-EAJ35	100	1492-EAJ35	100
DIN Rail -- Heavy Duty	1492-EAHJ35	50	1492-EAHJ35	50
Marking Systems:
Snap-in marker cards	1492-MR8X12 (84/card)	5	1492-M7X12 (108/card)	5
Snap-in marker cards	1492-M8X5 (160/card)	5	1492-M8X5 (160/card)	5

Screw Connection Terminal Blocks - Grounding Blocks

1492-JG70, 1492-JG120, 1492-JDG3

Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.

Specifications:

Certifications	CSA	IEC	ATEX	CSA	IEC	ATEX	CSA	IEC	ATEX
Voltage Rating							300V AC/DC	400V AC/DC	275V AC/DC
Maximum Current							20 A	24 A	21 A
Wire Range (Rated Cross Section)	#6...2/0 AWG	70 mm²	70 mm² (#8...2/0 AWG)	#4...3/0 AWG	#4...4/0 AWG	16...95 mm²	#22...12 AWG	2.5 mm²	2.5 mm² (#20...14 AWG)
Wire Strip Length	0.87 in. (22 mm)	1.06 in. (27 mm)	0.39 in. (10 mm)
Recommended Tightening Torque	87.0 lb·in (9.8 N·m)	88.5 lb·in (10 N·m)	4.5...7.1 lb·in. (0.5...0.8 N·m)
Mounting Torque -- Center Screw	17.7...35.4 lb·in (2.0...4.0 N·m)
Density	14 pcs/ft (48 pcs/m)	11 pcs/ft (37 pcs/m)	59 pcs/ft (196 pcs/m)
Housing Temperature Range	-58...+248 °F (-50...+120 °C)	-58...+248 °F (-50...+120 °C)	-58...+248 °F (-50...+120 °C)
Short-Circuit Current Rating	See page 12-42	See page 12-42	See page 12-42

Terminal Blocks:

Color:	Cat. No.	Pkg. Qty.	Cat. No.	Pkg. Qty.	Cat. No.	Pkg. Qty.
Green/Yellow	1492-JG70	10	1492-JG120	5
Grey					1492-JDG3	100

Accessories:

Mounting Rails:	Cat. No.	Pkg. Qty.	Cat. No.	Pkg. Qty.	Cat. No.	Pkg. Qty.
1 m Symmetrical DIN (Steel)					199-DR1	10
1 m Symmetrical DIN (Aluminum)					1492-DR5	10
1 m Hi-Rise Sym. DIN (Aluminum)					1492-DR6	2
1 m Angled Hi-Rise Sym. DIN (Steel)					1492-DR7	2
Screw Type 1 m Symmetrical Heavy Duty DIN (Copper, Unslotted)	1492-DR8	5	1492-DR8	5
End Barrier	Grey	Not Required		Not Required		1492-EBJD3	20
	Yellow	Not Required				1492-EBJD3-Y	20
Jumpers:
Screw Center Jumper -- 10-pole					1492-CJJ5-10	20
Screw Center Jumper -- 4-pole					1492-CJJ5-4	50
Screw Center Jumper -- 3-pole					1492-CJJ5-3	50
Screw Center Jumper -- 2-pole					1492-CJJ5-2	50
Insulated Side Jumper -- 24-Pole					1492-SJ5A-24	50
Insulated Side Jumper -- 10-Pole					1492-SJ5A-10	50
End Anchors and Retainers:
Screwless End Retainer	1492-ERL35	20	1492-ERL35	20	1492-ERL35	20
DIN Rail -- Normal Duty	1492-EAJ35	100	1492-EAJ35	100	1492-EAJ35	100
DIN Rail -- Heavy Duty	1492-EAHJ35	50	1492-EAHJ35	50	1492-EAHJ35	50
Marking Systems:
Snap-in marker cards	1492-M7X12 (108/card)	5	1492-M7X12 (108/card)	5	1492-M5X8 (200/card)	5
Snap-in marker cards	1492-M8X5 (160/card)	5	1492-M7X12 (108/card)	5	1492-M5X5 (144/card)	5

Screw Connection Terminal Blocks - Single-Circuit Neutral Disconnect Blocks

1492-J3ND, 1492-J4ND, 1492-J16ND

Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.

Specifications:

Certifications	CSA	IEC	CSA	IEC	CSA	IEC	ATEX
Voltage Rating	600V AC/DC	400V AC/DC	600V AC/DC	400V AC/DC	300V AC/DC	400V AC/DC
Maximum Current	25 A	20 A	24 A	35 A	25 A	32 A	65 A	76 A
Wire Range (Rated Cross Section)	#22...12 AWG	#26...12 AWG	2.5 mm²	#22...10 AWG	#26...10 AWG	4 mm²	#14...6 AWG	16 mm²
Wire Strip Length	0.394 in. (10 mm)	0.394 in. (10 mm)	0.47 in. (12 mm)
Recommended Tightening Torque	7.1 lb·in (0.5 N·m)	9.0 lb·in (1.0 N·m)	19.5 lb·in (2.2 N·m)
Density	59 pcs/ft (196 pcs/m)	49 pcs/ft (/163 pcs/m)	25 pcs/ft (83 pcs/m)
Housing Temperature Range	-58...+248 °F (-50...+120 °C)	-58...+248 °F (-50...+120 °C)	-58...+248 °F (-50...+120 °C)
Short-Circuit Current Rating	See page 12-42	See page 12-42	See page 12-42

Terminal Blocks:

Color:	Cat. No.	Pkg. Qty.	Cat. No.	Pkg. Qty.	Cat. No.	Pkg. Qty.
Blue	1492-J3ND	100	1492-J4ND	100	1492-J16ND	50

Accessories:

Mounting Rails:	Cat. No.	Pkg. Qty.	Cat. No.	Pkg. Qty.	Cat. No.	Pkg. Qty.
1 m Symmetrical DIN (Steel)	199-DR1	10	199-DR1	10	199-DR1	10
1 m Symmetrical DIN (Aluminum)	1492-DR5	10	1492-DR5	10	1492-DR5	10
1 m Hi-Rise Sym. DIN (Aluminum)	1492-DR6	2	1492-DR6	2	1492-DR6	2
1 m Angled Hi-Rise Sym. DIN (Steel)	1492-DR7	2	1492-DR7	2	1492-DR7	2
End Barriers
Busbar Support Plates	Blue	1492-BSPJ3ND-B	20	1492-BSPJ3ND-B	20	1492-BSPJ3ND-B	20
End Anchors and Retainers:
Screwless End Retainer	1492-ERL35	20	1492-ERL35	20	1492-ERL35	20
End Anchor -- Normal Duty	1492-EAJ35	100	1492-EAJ35	100	1492-EAJ35	100
End Anchor -- Heavy Duty	1492-EAHJ35	50	1492-EAHJ35	50	1492-EAHJ35	50
Neutral Connection Block (4 mm)	Blue*	1492-JNC4-B	50	1492-JNC4-B	50	1492-JNC4-B	50
Neutral Bus Bar (1 m)	1492-NBB3-1M	5	1492-NBB3-1M	5	1492-NBB3-1M	5
Marking Systems:
Snap-in Marker Cards	1492-MR5X12 (120/card)	5	1492-MR6X12 (120/card)	5	1492-MR8X12 (84/card)	5
Snap-in Marker Cards	1492-M5X5 (200/card)	5	1492-M6X5 (200/card)	5	1492-M7X12 (108/card)	5

* These terminals mount on the 1492-NBB3-1M Neutral Busbar. They can accept 1492-M6X5 snap-in markers.

Spring-Clamp Connection Terminal Blocks - Standard Feed-Through Blocks

1492-L6, 1492-L6T, 1492-L10

Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.

Specifications:

Certifications	CSA	IEC	ATEX	CSA	IEC	ATEX	CSA	IEC	ATEX
Voltage Rating	600V AC/DC	800V AC/DC	550V AC/DC	600V AC/DC	800V AC/DC	550V AC/DC	600V AC/DC	800V AC/DC	550V AC/DC
Maximum Current	50 A	41 A	36 A	50 A	41 A	36 A	60 A	57 A	50 A
Wire Range (Rated Cross Section)	#22...8 AWG	#20... 8 AWG	6 mm²	6 mm² (20... 8 AWG)	#22...8 AWG	#20...8 AWG	6 mm²	6 mm² (20... 10 AWG)	#16...6 AWG	10 mm²	10 mm² (16... 8 AWG)
Wire Strip Length	0.51 in. (13 mm)	0.51 in. (13 mm)	0.70 in. (18 mm)
Density	37 pcs/ft (123 pcs/m)	37 pcs/ft(123 pcs/m)	30 pcs/ft (99 pcs/m)
Housing Temperature Range	-58...+248 °F (-50...+120 °C)	-58...+248 °F (-50...+120 °C)	-58...+248 °F (-50...+120 °C)
Short-Circuit Current Rating	See page 12-78	See page 12-78	See page 12-78

Terminal Blocks:

Color	Cat. No.	Pkg. Qty.	Cat. No.	Pkg. Qty.	Cat. No.	Pkg. Qty.
Grey	1492-L6	50	1492-L6T	50	1492-L10	25
Red	1492-L6-RE	50	1492-L6T-RE	50	1492-L10-RE	25
Blue	1492-L6-B	50	1492-L6T-B	50	1492-L10-B	25
Black	1492-L6-BL	50	1492-L6T-BL	50	1492-L10-BL	25
Green	1492-L6-G	50	1492-L6T-G	50	1492-L10-G	25
Yellow	1492-L6-Y	50	1492-L6T-Y	50	1492-L10-Y	25
Orange	1492-L6-OR	50	1492-L6T-OR	50	1492-L10-OR	25
Brown	1492-L6-BR	50	1492-L6T-BR	50	1492-L10-BR	25
White	1492-L6-W	50	1492-L6T-W	50	1492-L10-W	25

Accessories:

Mounting Rails	Cat. No.	Pkg. Qty.	Cat. No.	Pkg. Qty.	Cat. No.	Pkg. Qty.
1 m Symmetrical DIN (Steel)	199-DR1	10	199-DR1	10	199-DR1	10
1 m Symmetrical DIN (Aluminum)	1492-DR5	10	1492-DR5	10	1492-DR5	10
1 m Hi-Rise Sym. DIN (Aluminum)	1492-DR6	2	1492-DR6	2	1492-DR6	2
1 m Angled Hi-Rise Sym. DIN (Steel)	1492-DR7	2	1492-DR7	2	1492-DR7	2
End Barriers
Grey	1492-EBL6	50	1492-EBL6T	50	1492-EBL10	20
Blue	1492-EBL6-B	50	1492-EBL6T-B	50	1492-EBL10-B	20
Yellow	1492-EBL6-Y	50	1492-EBL6T-Y	50	1492-EBL10-Y	20
End Anchors and Retainers
Screwless End Retainer	1492-ERL35	20	1492-ERL35	20	1492-ERL35	20
DIN Rail -- Normal Duty	1492-EAJ35	100	1492-EAJ35	100	1492-EAJ35	100
DIN Rail -- Heavy Duty	1492-EAHJ35	50	1492-EAHJ35	50	1492-EAHJ35	50
Jumpers
Plug-in Center Jumper -- 32-Pole	1492-CJL8-32	10	1492-CJL8-32	10
Plug-in Center Jumper -- 4-Pole	1492-CJL8-4	60	1492-CJL8-4	60
Plug-in Center Jumper -- 3-Pole	1492-CJL8-3	60	1492-CJL8-3	60	1492-CJL10-2	25
Plug-in Center Jumper -- 2-Pole	1492-CJL8-2	60	1492-CJL8-2	60
Other Accessories
Test Plug					1492-TP23	20
Test Plug (Stackable)	1492-TPL8	25	1492-TPL8	25
Electrical Warning Plate	1492-EWPL8	20	1492-EWPL8	20	1492-EWPL10	20
Marking Systems
Snap-In Marker Cards*	1492-M6X12 (120/card)	5	1492-M6X12 (120/card)	5	1492-M6X12 (120/card)	5
Snap-In Marker Cards	1492-MR8X12 (84/card)	5	1492-M8X5 (160/card)	5	1492-M8X5 (160/card)	5
Hinged Marker Cards	1492-MH6X12 (80/card)	5	1492-MH6X12 (80/card)	5	1492-MH5X15 (96/card)	5

* May only be mounted in terminal block corner marking positions.

Spring-Clamp Connection Terminal Blocks - Grounding Blocks

1492-LG6, 1492-LG6T, 1492-LG10

Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.

Specifications:

Certifications	CSA	IEC	ATEX	CSA	IEC	ATEX	CSA	IEC	ATEX
Voltage Rating
Maximum Current
Wire Range (Rated Cross Section)	#22...8 AWG	6 mm²	6 mm² (20... 8 AWG)	#22...8 AWG	6 mm²	6 mm² (20... 10 AWG)	#16...6 AWG	10 mm²	10 mm² (16... 8 AWG)
Wire Strip Length	0.51 in. (13 mm)	0.51 in. (13 mm)	0.70 in. (18 mm)
Density	37 pcs/ft (123 pcs/m)	37 pcs/ft (123 pcs/m)	30 pcs/ft (99 pcs/m)
Housing Temperature Range	-58...+248 °F (-50...+120 °C)	-58...+248 °F (-50...+120 °C)	-58...+248 °F (-50...+120 °C)

Terminal Blocks:

Color:	Cat. No.	Pkg. Qty.	Cat. No.	Pkg. Qty.	Cat. No.	Pkg. Qty.
Green/Yellow	1492-LG6	50	1492-LG6T	50	1492-LG10	25

Accessories:

Mounting Rails:	Cat. No.	Pkg. Qty.	Cat. No.	Pkg. Qty.	Cat. No.	Pkg. Qty.
1 m Symmetrical DIN (Steel)	199-DR1	10	199-DR1	10	199-DR1	10
1 m Symmetrical DIN (Aluminum)	1492-DR5	10	1492-DR5	10	1492-DR5	10
1 m Hi-Rise Symmetrical DIN (Aluminum)	1492-DR6	2	1492-DR6	2	1492-DR6	2
1 m Angled Hi-Rise Sym. DIN (Steel)	1492-DR7	2	1492-DR7	2	1492-DR7	2
End Barrier	Yellow	1492-EBL6-Y	50	1492-EBL6T-Y	50	1492-EBL10-Y	20
End Anchors and Retainers
Screwless End Retainer	1492-ERL35	20	1492-ERL35	20	1492-ERL35	20
DIN Rail -- Normal Duty	1492-EAJ35	100	1492-EAJ35	100	1492-EAJ35	100
DIN Rail -- Heavy Duty	1492-EAHJ35	50	1492-EAHJ35	50	1492-EAHJ35	50
Other Accessories:
Test Plug					1492-TP23	20
Test Plug (Stackable)	1492-TPL8	25	1492-TPL8	25
Marking Systems:
Snap-In Marker Cards*	1492-MR8X12 (84/card)	5	1492-M6X12 (120/card)	5	1492-M6X12 (120/card)	5
Snap-In Marker Cards	1492-M8X5 (160/card)	5	1492-M8X5 (160/card)	5	1492-M8X5 (160/card)	5
Hinged Marker Cards	1492-MH6X12 (80/card)	5	1492-MH6X12 (80/card)	5	1492-MH5X15 (96/card)	5

* May only be mounted in terminal block corner marking positions.

	1746 SLC I/O to Compact 5000 I/O Conversion System Selection Guide This guide provides information on selecting and installing the 1746 SLC I/O to Compact 5000 I/O Conversion System from Allen-Bradley. It details conversion modules, chassis, and wiring diagrams.
	Allen-Bradley 1492JD3 Terminal Block - Technical Specifications and Overview Detailed information on the Allen-Bradley 1492JD3 screw connection terminal block, including electrical, construction, mechanical, and environmental specifications, along with related accessories.
	Allen-Bradley 1492CM1771LA003 I/O Conversion Module - PLC Connection Cable Product overview of the Allen-Bradley 1492CM1771LA003 I/O Conversion Module, a durable and efficient PLC connection cable designed for industrial applications. Features include a wide range of options for digital and analogue inputs/outputs.
	Allen-Bradley 1492CH174613 I/O Conversion System Datasheet Datasheet for the Allen-Bradley 1492CH174613 I/O Conversion System, compatible with SLC500 and 5069 Compactlogix, featuring 13 slots, PLC mounting rack capabilities, and detailed construction and dimension specifications.
	Allen-Bradley 1492J3B Screw Connection Terminal Block - Technical Specifications Detailed technical specifications and overview of the Allen-Bradley 1492J3B screw connection terminal block, including electrical, construction, mechanical, dimensional, and environmental data. Suitable for wiring management applications.
	Allen-Bradley 1492ACAB025A46 Pre-wired Cable Specifications Technical specifications and product overview for the Allen-Bradley 1492ACAB025A46 pre-wired cable, designed for PLC connectivity with analog I/O.
	Allen-Bradley 1492ACABLE025K Prewired Cable Datasheet Datasheet for the Allen-Bradley 1492ACABLE025K prewired cable, featuring 1746HSCE Counter Encoder Input Output with a 2.5m length. Details component type, range, model, and electrical dimensions for industrial applications.
	Allen-Bradley 1492CAB005T64 I/O Prewired Cable Datasheet Datasheet for the Allen-Bradley 1492CAB005T64 I/O Prewired Cable, featuring PLC connection, 0.5m length, and compatibility with 1764 Micrologix 1500 systems. Provides details on its durable and efficient design for industrial automation.

Bulletin 1492: IEC Terminal Block Accessories - Marking Systems

Marking Solutions

ClearMark Printer and Accessories

Features:

System Requirements:

X-Y Plotter and Accessories

Features:

System Requirements:

Blank Markers

Snap-In Individual Markers (1492-M)

Snap-In Linked Markers (1492-MR)

Snap-In Hinged Markers

Cable Markers (1492-MW)

Blank Markers, Continued

Self-Adhesive Markers (1492-MAS)

Wire Markers (1492-MWC)

Snap-In Individual Markers for Rockwell Automation products and Competitive Terminal Blocks (1492-MC)

1492 Pre-Printed Markers

Catalog Number Explanation

Marker Selection Table:

Text Direction Table:

Printing Selection Table:

Custom Printed Marker Cards

Electrical Warning Plate Markers

Screw Connection Terminal Blocks - Standard Feed-Through Blocks

1492-J3, 1492-J4, 1492-J6

Specifications:

Terminal Blocks:

Accessories:

Screw Connection Terminal Blocks - Standard Feed-Through Blocks

1492-J50, 1492-J70, 1492-J120

Specifications:

Terminal Blocks:

Accessories:

Screw Connection Terminal Blocks - Grounding Blocks

1492-JG6, 1492-JG10

Specifications:

Terminal Blocks:

Accessories:

Screw Connection Terminal Blocks - Grounding Blocks

1492-JG70, 1492-JG120, 1492-JDG3

Specifications:

Terminal Blocks:

Accessories:

Screw Connection Terminal Blocks - Single-Circuit Neutral Disconnect Blocks

1492-J3ND, 1492-J4ND, 1492-J16ND

Specifications:

Terminal Blocks:

Accessories:

Spring-Clamp Connection Terminal Blocks - Standard Feed-Through Blocks

1492-L6, 1492-L6T, 1492-L10

Specifications:

Terminal Blocks:

Accessories:

Spring-Clamp Connection Terminal Blocks - Grounding Blocks

1492-LG6, 1492-LG6T, 1492-LG10

Specifications:

Terminal Blocks:

Accessories:

Related Documents