Instruction Manual for Meenova models including: 3in1-MS-STA MagSafe Foldable Wireless Charger, 3in1-MS-STA, MagSafe Foldable Wireless Charger, Foldable Wireless Charger, Wireless Charger, Charger
Meenova Foldable 3 in 1 Wireless Charger Compatible with MagSafe, Apple iPhone 15 14 13 12, Watch, AirPods, Lightweight Portable,Strong Magnetic Attraction Suitable for Outdoor Offices, etc. (White) : Cell Phones & Accessories
Place the headset in the charging area of the headset of your mobile phone, automatically aim at the charging position, and the headset enters the charging ...
Instruction Manual MagSafe Fodable charging station Product Description Magnetic Induction Area Type C Port Watch Induction Area Name: Fodable charging station Executive standard: Qi Conversion rate Input Output Watch output Size Airpods : 80% : 9V/2A&above : 15W/10W/7.5W/5W : 2.5W : 72(L)x72(W)x19.5(H)mm :3W Method of use 1. Put the Phone8 or above model or MagSafe protective case close to the magnetic absorption charging area of the product The magnetic attraction is fixed on the product and automatically aligned with the charging position. The phone is in charge state. 2. Place the mobile phone with MagSafe wireless charging function close to the magnetic charging area of the product The magnetic mutual attraction is fixed to the product, automatically aligned with the charging position, and the mobile phone enters the charging state. 3. Place the watch in the charging area of the watch, automatically aim at the charging position, and the watch enters the charging stateState. 4. Place the headset in the charging area of the headset of your mobile phone, automatically aim at the charging position, and the headset enters the charging state 5. Devices that support the QI protocol will be aligned to the charging area and the device will be powered on. 6. Remove the device and restore the product to standby. Safety Notice 1. Do not pull the power cord hard to avoid breaking or falling off 2. Do not disassemble or throw it into fire or water to avoid shortcircuit leakage. 3. Do not use in severe high temperature, humidity or corrosive environment to avoid leakage of damaged circuit Frequently Asked Questions 1.Charging is slower than the mobile phone itself or the external receiving coil allows the wireless charging current to vary in size, or the application runs at a higher power consumption when the mobile phone is charging. It is recommended to reduce or close the application. 2.The mobile phone is charging intermittently and the charging current is insufficient. Use a full power charging head (adapter) of 9V/2A or above QC2.0. 3. Charging Fever It is normal for the receiving coil or launching plate to heat up during wireless charging. It is recommended to adjust the charging position. 4. Charger does not work Do not place metal objects or magnetic cards in the charging area. If the product overheats and does not work, remove the phone to cool down and try charging again. 5. Your phone or watch won't charge If the receiving coil of the mobile phone or watch is faulty or the charging position is inaccurate, it is recommended to replace the receiving coil or repair it.Corel PDF Engine Version 20.1.0.708