SCANGRIP MINI SLIM LED Work Light

Specifications

• 5 years warranty (register at scangrip.com to activate)
• LED design with 16 LEDs
• Brightness: 20-200 lumen (Spot: 100 lumen)
• 3 brightness levels
• OPTILight feature
• Battery life: 1.9h / 2h (standard), 5.5h (OPTILight)
• Charging time: 2.5h
• Battery: 3.7V / 800 mAh Li-ion
• Power: 1.4W
• Dimensions: 130 x 43 x 29 mm (5.12 x 1.69 x 1.14 in)
• Weight: 97 g (0.21 lbs)
• Ingress Protection: IP30
• Impact Resistance: IK07
• Drop resistance: 2 m (6.6 ft)
• Operating temperature: -10 to +40 °C (+14 to +104 °F)
• Includes: USB cable
• Excludes: Charger

Safety Warnings

• ⚠️ Avoid looking directly into the beam of light, as this will result in dazzling.
• ? Do not use the lamp near a naked flame.
• ? The light source of this lamp is not replaceable. When the light source reaches its end of life, the whole lamp must be replaced.

Charging Instructions and Battery Tips

• Only charge the lamp indoors at 5 °C to 40 °C (41 to 104 °F).
• Before using the lamp for the first time, the battery must be fully charged.
• Red charging indicators light up with the highest flashing during charging.
• The highest charging indicator will not be flashing if temperature does not allow charging.
• The red charging indicators will all be constantly on when fully charged.
• Always replace the battery with an original battery.
• Do not leave the battery without charge for an extended period. Deep discharge risks damaging the battery.

Usage

Diagram A: Power Button

Diagram B: Brightness Button

• To turn the lamp on or off, press the power button (A).
• Press and hold the power button (A) to turn on spotlight mode.
• Press the brightness button (B) to turn on the lamp in OPTILight mode. The OPTILight indicator will turn on.
• To increase or decrease the brightness, press the brightness button (B).
• When the brightness is changed, the new value is saved, and the lamp will start at that level the next time it is turned on.
• When battery is below 10%, the lamp will flash 3 times every 2 minutes.
• If the lamp temperature is too high or low, the lamp will turn off and flash all battery indicators 10 times.

Spare Parts and Disposal

With convenient access to spare parts, users can extend the lifespan of our products and ensure long-lasting functionality. Find available spare parts on scangrip.com.

Discarded electrical products must not be disposed of together with household waste. Please use recycling facilities. Ask your local authority or retailer for advice on recycling.

• The battery must be removed from the device before it is broken up.
• The device must be disconnected from the mains when the battery is removed.
• Please dispose of the battery safely.

Manufacturer's Warranty (Australia and New Zealand)

This SCANGRIP product is guaranteed for a period of 2 (two) years from date of purchase. This guarantee shall become invalid if the product has been misused, tampered with or accidentally damaged. If the product is defective, SCANGRIP undertakes to repair or replace the product or any part of it that is defective; or wholly or partly recompense you if they are defective. This guarantee is in addition to other rights and remedies available to consumers, all of which are given by SCANGRIP to you if you are a consumer.

SCANGRIP goods come with guarantees that cannot be excluded under the Australian or New Zealand Consumer Law. You are entitled to a replacement or refund for a major failure and for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

If you wish to make a claim, please return this product to the original place of purchase together with your purchase receipt or go to our website www.scangrip.com and fill out the claim form.