Dometic MyFridge Refrigeration MF05M, MF1M

Safety Instructions

General Safety:

• Connect the appliance only with the supplied mains adapter to the AC power supply of 100 – 240 V.
• Never pull the mains adapter out of the socket by pulling the connection cable.
• If the mains adapter is damaged, it must be replaced by a cable of the same type and with the same specifications.
• Electrical appliances are not toys! Keep and use the appliance out of the reach of children.
• Do not operate the appliance if it shows visible defects.
• Only specialized personnel may carry out repairs on the appliance. Incorrectly performed repairs can lead to dangerous situations.
• Disconnect the connection cable:
  • before carrying out any cleaning and maintenance work
  • after each use
• Avoid blocking the ventilation slots.
• Compare the voltage indicated on the rating plate with the existing power supply.
• Attention: Risk of overheating! Ensure that adequate heat dissipation during operation is constantly guaranteed. Ensure that the appliance maintains sufficient distance from walls or objects so that air can circulate.
• Persons (including children) who, due to their physical, sensory or mental capabilities, lack of experience or knowledge, cannot use the product safely, are not permitted to use this product without the supervision and instructions of a person responsible for their safety.

Safety during appliance operation:

• Before commissioning, ensure that the power line and plug are dry.
• Never operate the appliance with wet hands.
• Supervise the appliance during operation.
• Do not use the appliance on hot surfaces.
• Do not place the appliance near open flames.
• Do not pour the liquids you wish to cool directly into the appliance. Instead, use the supplied milk jug.

Product Contents

The delivery includes:

• 1 x Dometic MyFridge milk cooler
• 1 x Milk jug with flexible tube
• 1 x Mains adapter for AC power supply

Proper Use

The appliance is used to provide cold milk for automatic coffee machines and coffee makers. The milk is cooled in the supplied jug and delivered to the automatic coffee machine via the flexible tube integrated in the lid.

Technical Description

This appliance is a compact tabletop unit. It can keep milk cold at a temperature of approximately +1 °C to +7 °C (depending on the ambient temperature). Cooling is achieved by a wear-free Peltier effect with heat dissipation via a fan.

Handling

Note:

• For hygiene reasons, clean the new appliance inside and out with a damp cloth before commissioning (see also chapter "Cleaning and Maintenance" on page 21).
• In case of appliance failure (e.g., caused by electrostatic discharge), press one of the function keys again to restore normal appliance operation.

To cool milk:

1. Fill the milk jug and screw on the lid with the flexible tube.
2. Insert the milk jug into the milk cooler.
3. Connect the flexible tube of the milk cooler to the flexible tube of your automatic coffee machine.
4. Connect the appliance with the mains adapter to a power source and press the "ON/OFF" button (see Fig. 2 A1, page 2). The operating indicator (see Fig. 2 A2, page 2) lights up and the appliance begins to cool.
5. To end the cooling process, press the "ON/OFF" button (see Fig. 2 A1, page 2). When switching off the appliance, disconnect the power cable.

Cleaning and Maintenance

Warning!

• Disconnect the power cable from the socket before cleaning the appliance.
• Observe the cleaning instructions in the documentation of your coffee machine.
• Never clean the appliance under running water or immerse it in soapy water.
• Do not use corrosive or abrasive cleaning agents or hard utensils, as they could damage the appliance.

Note:

• The milk jug (without lid) is dishwasher safe.
• Clean the interior of the appliance with a damp cloth when necessary.
• Clean the exterior of the appliance with a damp cloth.
• Clean the lid and the flexible tube with a conventional coffee machine cleaning product.

Warranty

The statutory warranty period applies. If the product exhibits any defects, please contact the manufacturer's branch in your country (see addresses on the back of these instructions) or your specialized dealer.

For processing the repair and warranty, you must also send the following documents:

• a copy of the invoice with the date of purchase,
• the reason for the claim or a description of the fault.

Troubleshooting

Waste Disposal

Dispose of packaging material in the corresponding recycling bin.

When you are going to dispose of the product permanently, please inquire at your nearest recycling center or at a specialized retailer about the relevant material disposal regulations.

Technical Data