WSN802G E-Series Wi-Fi Radio Module
Enterprise Security Features
2.4 GHz Low Power Wi-Fi Radio Module
Discontinued
Overview
The WSN802G E-Series are low-cost, pre-certified 2.4 GHz Wi-Fi radio transceiver modules with a comprehensive set of enterprise security features. These modules enable seamless interfacing with corporate Wi-Fi networks, providing robust encryption, authentication, and security protection. The WSN802 E-series radio modules interface seamlessly to existing Wi-Fi 802.11 b/g/n network infrastructure.
The WSN802G E-series modules are ideal for applications that enable devices, machines, and other systems to connect directly to the internet for a broad range of machine-to-machine (M2M) applications, including medical, industrial controls, commercial automation, and many other areas where enterprise-secured Wi-Fi is a must.
With Wi-Fi to serial transmission, any unformatted data is transparently sent via the serial interface over the Wi-Fi network to a fixed IP address / port and vice versa, without the need for any additional formatting. The full TCP/IP stack on the module places less burden on the host applications and simplifies the design and development cycle.
The WSN802G E-Series radio modules implement IEEE 802.1x features:
- Integration with RADIUS Authentication Server to allow administration, auditing, and logging, and allowing for centralized management of user credentials
- Uses an Extensible Authentication Protocol (EAP)
- Certificate Authentication - blocks hackers trying to infiltrate corporate networks
- Differing Encryption key in every packet offers robust security
- Includes Full TCP / IP stack on the module
Other Features Include:
- Data rates from 1Mbs to 11Mbs
- WPA2
- Transparent Serial to Wi-Fi transmission
- TCP client/server support
- Ad Hoc and Infrastructure modes
- UART interface
- FCC, ETS and Canadian IC Certified
Specifications
| Characteristic | Value |
|---|---|
| Radio Characteristics | IEEE 802.11b/g |
| Frequency | 2.4 - 2.474 GHz |
| Transmit Power | 10 mW |
| RF Data Rates | 1, 2, 5, 5, 11 Mbps |
| Receiver Sensitivity | -92 dBm at 1 Mbps; -81 dBm at 11 Mbps |
| Data Encryption | AES-128 |
| Enterprise Security | EAP-TLS, EAP-TTLS, EAP-FAST, EAP-PEAP, MSCHAP, GTC |
| Network | UDP, DHCP, DNS, ARP, TCP, SNMP |
| Environmental | -40 °C to +85 °C, 10 - 90% humidity, non-condensing |
| Power Supply | 3.3 to 5 VDC |
| Dimensions | 1.05 x 1.04 inches (2.67 x 2.50 mm) for WSN802GC; 1.05 x 1.10 inches (2.67 x 2.89 mm) for WSN802GP |
| RF Connection | U.FL Coaxial Connector, Chip Antenna |
| Interface | UART |
| Certification | FCC, Canadian IC and ETSI certified |
How to Buy
Murata products are sold through a world-wide network of manufacturer's reps and distributors. Go to the Murata website at www.Murata.com and visit the “How to Buy" section to locate a sales / distribution partner near you.
| Part Number | Description |
|---|---|
| WSN802GP-E | Wi-Fi Module - Pinned Version |
| WSN802GPA-E | Wi-Fi Module - Pinned Version, Chip Antenna |
| WSN802GC-E | Wi-Fi Module - Surface Mount Version |
| WSN802GCA-E | Wi-Fi Module – Surface Mount Version, Chip Antenna |
| WSN802GADK, WSN802GADK-A | Developer's Kit, chip antenna, option with pre-configured AP |
| WSN802GDK, WSN802GDK-A | Developer's Kit, option with pre-Configured access point |
For more information visit www.Murata.com
4441 Sigma Road, Dallas, TX 75244 USA
muRata INNOVATOR IN ELECTRONICS
