User Manual for ipega models including: ipega, PG-P4013, Scorpio, Gamepad, Extension, Key, Converter
Product Manual (PG-P4013). 1.This product is mainly suitable for P4 game controller ;. 2. This product can convert P4 Game controller to be compatible with ...
23 gen 2021 —
File Info : application/pdf, 1 Pages, 2.70MB
DocumentDocumentScorpio gamepad extension key converter Product Manual (PG-P4013) Product Features: 1.This product is mainly suitable for P4 game controller ; 2. This product can convert P4 Game controller to be compatible with P4, P3, N·S, PC, Android and IOS devices for game operation; 3. The product supports the TURBO function, and also supports the function of four paddle user-defined setting keys (the factory default is X/// function); 4. This product has the function of power interrupt & saving and one key recovery; 5. Ergonomic structure, comfortable hand feeling ; * Due to the official game platform software upgrade or source code changes and other not resist factors caused of some games can not be played or connected with our game pad. iPega has no responsibility , iPega reserves the right of final interpretation. Introduction for key functions M3 key() M4 key() Charging indicator Charging port On/off key Mode turntable Fixed gamepad clamp P4 gamepad port M2 key(X) M1 key() Mode indicator Electrical Parameter 1. Working voltage: DC3.7V 2. Working current: 50 mA/ access P4 gamepad 100 mA/ vibration working current 200mA 3. Static current: <20uA 4. Continuous gameplay time: almost 4hours 5. Input voltage/current: DC5V/500mA 6. Charging time: almost 4hours 7. BT3.0, transmission distance: 8M 8. Battery capacity: 1000mAh 9. Standby time: up to 30 days once fully charged P4/P3/N·S/PC console connection: 1.Wired connection is required when connecting each mode for the first time, turn the product knob switch to the corresponding mode and press the middle button to turn on, and then use a USB data cable to connect the device to the game console. After the connection is successful, connect the device to the P4 gamepad to connect , Unplug the USB data cable to enter the wireless mode; 2. The second connection press the top button can be wireless connection; 3. Device shutdown: Turn the toggle switch to the shutdown position and press the top button to shut down; Note: To connect to the P4 game console for the first time, you need to connect to the USB data cable, wait 3-5 seconds for the mode light to go out, unplug the USB cable and the connection is successful, you can enter the wireless mode; PC only supports wired mode P4 mode P3 mode N·S mode PC mode On/off Restoration of factory settings Programming/ replication keys Turbo function Android/ iOS mode Instruction of Android / iOS device wireless connection: (iOS only supports 13.0 or above system) 1. Turn the product knob switch to Mobile phone mode( ); 2. Press the middle button to turn on; 3. Connect the product to the P4 gampad, and then press the PS button of the P4 gamepad, the LED light flashes quickly; 4. Turn on the wireless mode of the phone, find the name of Android device (wireless controller)/wireless nameof iOS device (DUALSHOCK 4wireless controller) click on the pairing connection; 5. When using Android devices, it is recommended to use the grape game hall / connection IOS device, recommend the use of Gamevice Live game platform, some iOS MFi game directory: Apple App Store store search download "Gamevice Live" game platform or search MFIGameloft and most games can be supported; Key mapping function: Setting method: 1. When the gamepad is connected to the console, dial the mode switch to the key mapping position and press the top switch to enter the setting mode (temporarily block all functions of the gamepad when setting); 2. Press any dial key to be programmed to add gamepad function key (such as X key), release the dial key settings completed, after setting the gamepad vibration prompt and automatically save exit; 3. can be set at the same time: L1/L2/L3/R1/R2/R3/X///; 4. The four dials after the Product factory set up for X/// function; Single dial removal method: According to the above setting methods 1 and 2 repeat operation, gamepad vibration once prompt At the same time clear 4 dial key method: When the gamepad is connected to the console, dial the mode switch to the key mapping position block all functions) long press the top button 3 seconds to clear all dial button function (gamepad long vibration once prompt); Turbo function: Setting method: 1. If the gamepad is connected to the game console, dial the mode switch to the turbo setting position and press the top switch to enter the setting mode (temporarily block all functions of the gamepad when setting); 2. Press the button need to setted (such as the X button), after clearing is completed, the gamepad will vibrate once and it will automatically save and exit; 3. key can be set at the same time: L1/L2/L3/R1/R2/R3/X///. Single key clearing method: Turn the mode switch to turbo setting position and press the top switch to enter the setting mode (all functions of the handle are temporarily shielded during setting); Press the set key (e.g. x key), after clearing, the handle vibrates once and automatically saves and exits; All key clearing methods: Turn the mode switch to turbo setting position (temporarily shield all functions of the handle when clearing); Press and hold the top button for 3 seconds to clear all turbo functions (after clearing, the handle will vibrate for a long time and will automatically save and exit); On/off keys long press function: In addition to restore factory settings and shutdown, the rest of the mode has long press function; Remove the wireless address stored in the current mode P4P3 NcS PC Android/ iOS and shut down; keys mapping, TURBO delete the build map settings and TURBO settings stored in the current Restore factory settings Dial the mode switch to restore the factory setting position, press the top switch to restore the factory setting Power down and saving function Product with power-down saving function, various modes have a separate (button preset), will be saved when setting Other instructions 1. When the device is in P3 mode, it will shut down when plugged into the P4 game console. Others are the same 2. Boot directly into the build map or turbo mode will shut down; 3. Before setting the key map or TURBO change mode please shut down first; 4. Unconnected devices will automatically shut down within 30 seconds; 5. Too low battery power will cause the wireless connection but the button data cannot be uploaded or the device shuts down abnormally after the gamepad is inserted 6. It is recommended to fully charge of the original P4 gamepad when using Operation instructions P4 game P3 game N·S game PC Android iOS console console console computer device device Pairing mode Only supports Wireless connection Support wireless and wired connection Only supports wired connection Only support wireless connection RGB indicators color blue Green Red Cyan Purple After each mode is successfully connected, the color of indicator is controlled by the game console Charging function When charging in ON/OFF state , the bule indicator will be flash quickly Fully charged, the blue indicators will be off; Notes: 1. Please do not store this product in wet or high-temperature areas. 2. The product has built-in batteries, please do not place near fire and other dangerous locations 3. Don't knap, beat, drub, pierce, or try to decompose this product, to avoid unnecessary damage to the product. 4. Non professional personnel should not disassemble the product, otherwise it will not be covered in the after-sales warranty service. 5. Due to the official game platform software upgrade or source code changes and other not resist factors caused of some games can not be played or connected with our gamepad. iPega has no responsibility , iPega reserves the right of final interpretation. Accessories List Enhanced key x1 Product Manualx1 Micro USB cablex1 Patent No.ZL202030262875.5 : PG-P4013 1. P4 2. P4P4P3N·SPCiOS 3. turbo (X///) 4. 5. , * QQ837350687 (0755) 2791 8998 9:30-17:30 ipega : M3() M4() / P4 M2(X) M1() 1.DC3.7V 2.50mA/P4100mA/200mA 3.: <20uA 4.: 4h 5./DC5V/500mA 6.4 7.3.08M 8.1000mAh 9.30 P4/P3/N·S/PC 1. USB P4USB 2. 3. P4USB3-5USB PC P4 P3 N·S PC / / Turbo /iOS /iOS(iOS13.0) 1. 2. 3. P4P4PSLED 4. (wireless controller)/iOS (DUALSHOCK 4 wireless controller) 5. /IOSGamevice LiveiOS MFiApp Store"Gamevice Live"MFIGameloft; 1. 2. (X) 3. L1/L2/L3/R1/R2/R3/X/// 4 X/// 12 4 3 turbo 1. turbo 2. X 3. L1/L2/L3/R1/R2/R3/X/// 1. turbo 2. X 1. turbo 2. 3turbo / P4P3N·SPC/iOS TURBOTURBO 1. P3 P4 2. turbo 3. TURBO 4. 30 5. 6. P4 P4 P3 N·S PC IOS RGB : 1. /CHARGE 1. 2. 3. 4. , 5. x1 x1 ZL202030262875.5 Micro USB x1Adobe PDF library 10.01 Adobe Illustrator(R) 17.0