Comsol Retail
User Manual for comsol models including: WCTA10 Apple 3-in-1 Wireless Charging Dock, WCTA10, Apple 3-in-1 Wireless Charging Dock, Wireless Charging Dock, Charging Dock, Dock
Huawei Mate 9 User Manual Pdf - User Manual - Huawei
Comsol 3-in-1 Wireless Charging Dock iPhone Airpods and Watch | Officeworks
File Info : application/pdf, 1 Pages, 2.05MB
DocumentDocumentModel: WCTA10 Apple 3-iin-1 Wireless Charging Dock User Manual v1.1 Qi Certified Certification program ensures this charger has passed rigorous tests to guarantee safety, compatibility and energy efficiency. Compatibility Compatible with Qi-enabled devices* including iPhone 11 Pro/11 Samsung S10/S9/S8 Google Pixel 3/3 XL iPhone XS/XS Max/XR Samsung Note 10/9/8/5 Sony Xperia XZ2 iPhone X/8/8 Plus Huawei P30 Pro LG G7 ThinQ Samsung Galaxy Fold Huawei Mate 30/20 Pro LG V30+ Features Can charge a wireless iPhone and wireless Airpods or two wireless phones Requires Apple Watch magnetic charging cable to insert into dock (not included) Supports 7.5W Apple wireless fast charging for iPhone 8 or later Supports 10W wireless fast charging for compatible devices such as Samsung Galaxy Series and more Supports 5W standard wireless charging for all Qi enabled devices No need to remove your protective case. Works with most cases up to 3mm thick LED indicator to show charging status Smart IC enables energy saving mode when device is fully charged Full safety protection for your devices with Qi certified temperature control, strict voltage regulation & short circuit protection Includes AC wall charger and 1.5m USB-A to USB-C cable * Check with device manufacturer for Qi wireless compatibility Wireless Charger Operation Untwist the black cover of the Watch charger housing Using your exisiting Apple Watch magnetic charging cable (not included), insert into the holder and wrap the cable around the cylinder and plug into the USB-A port on the back of the dock Twist the black cover back over the watch magnetic charger The red LED will be on for 3 seconds to indicate the charging pad is powered on and in stand-by mode Place your wireless phone on either charging pad and your phone should start charging automatically If your phone does not not start charging, move your phone until the correct position is found and your phone starts charging Place your wireless charging Airpods on either charging pad Place your Apple watch on the Apple magnetic watch charger The LED will flash green to indicate charging When your phone is fully charged, the Smart IC enables energy saving trickle charge mode Please Note: When wirelessly charging a device, the wireless charger and your device may feel warm. This is a normal operating condition and should not be cause for concern. Specifications Wireless Standard: WPC/Qi (v1.2.4) Quantity of Wireless Charging Coils: One Coil per Pad Input: QC 3.0 DC 9V 2A Output: 10W / 7.5W / 5W / 3W for charging pads Output: DC 5V 2A for Apple Watch Working Frequency: 110 to 205KHz Charging Distance: 3 to 8mm Charging Efficiency: >72% Dimensions: 228 x 75 x 76mm Important Safety Instructions · Only use original or reputable third party chargers and cables · Do not get wet to avoid causing short circuit damage and leakage · Do not use in extreme hot, humid or corrosive environments to avoid short circuit damage and leakage · Do not place too close to magnetic strip or chip ID card to avoid magnetic failure · Do not place within 20cm of implantable medical devices (pacemaker, cochlear implant etc.) to avoid potential interference · Do not clean with harmful chemicals or detergents · Misuse, dropping or excessive force may cause damage to the charging dock iPhone is a trademark of Apple inc., registered in the U.S. and other countries. The `Qi' Symbol is a trademark of the Wireless Power Consortium. Android is a trademark of Google Inc. www.mycomsol.com.au Made in China