Instruction Manual for JBC models including: TMS-A, TMS-A ESD Table Mat, ESD Table Mat, Table Mat, Mat
INSTRUCTION MANUAL TMS / TMB ESD Table Mat This manual corresponds to the following references: TMS-A (450 x 600 mm / 17.72 x 23.62 in) TMB-A (900 x 600 mm / 35.43 x 23.62 in) Packing List The following items are included: ESD Table Mat .......................................... 1 unit* * size according to purchased reference Application Manual ................................................. 1 unit Ref. 0031825 To equip an EPA (Electrostatic Protected Area) workplace, it is necessary to place, among other items, an ESD table mat on the workplace. These components help to protect static-sensitive components from electrostatic discharge by dissipating charge from objects placed on their surface. This prevents sensitive components from being damaged by electrostatic discharges. Features The table mat is heat-, solder-, oil- and chemical-resistant. It comes with an anti-reflective grey surface, a non-slipping bottom-side and rounded corners. Each table mat is equipped with two ø10 mm press studs, any of which can be connected to an earthing connection or a grounded common point. 2 ø10 mm Press Studs (2x) Work Place Connection Example JBC's ESD table mat can be connected to other ESD components as shown in the picture below. The following matching accessories are sold separately: an ESD spiral earthing cable, an ESD earthing cable and an ESD earthing wristband and an ESD earthing plug. TM21* ESD Earthing Cable TM50 * ESD Earthing Wristband Eyelet Connection TM10 * ESD Earthing Plug Earth Connection or Common Point Ground System ø10 mm Press Stud Connection ø10 mm Press Stud Connection TMS or TMB ESD Table Mat ø3 mm Press Stud Connection TM20 * ESD Spiral Earthing Cable * not included, sold separately 3 Notes 4 Notes 5 Notes 6 Specifications TMS / TMB ESD Table Mat Ref.: TMS-A (450x600mm / 17.72 x 23.62 in) Ref.: TMB-A (900x600mm / 35.43 x 23.62 in) - Electrical resistance: - Resistant to: - Connections: - Material: - Surfaces: - ESD certification according to: - Glow wire testing according to: - Needle flame testing according to: 106 - 108 Abrasion, heat, solder, chemicals and oil ø10 mm press stud (2x) Permanently elastic 100% PVC-FREE and PHTHALATE-FREE Two-layered: dissipative and conductive RoHS compliant Top side: grey color, anti-reflective Bottom side: black color, non-slipping IEC 61340-5-1:2016, typical surface resistance Rpp (Point to Point) between 10E06-10E07 Ohm. IEC 60335-1:2010 (750°C for a duration of 30s.) IEC 60695-11-5 (Top and bottom side no flaming, no glowing for a duration of 30s) - Total Net Weight: - Package Dimensions/Weight: (L x W x H) TMS 0.76 kg / 1.68 lb 620 x 136 x 135 mm / 1.1 kg 24.41 x 5.35 x 5.31 in / 2.47 lb TMB 1.6 kg / 3.53 lb 620 x 136 x 135 mm / 1.9 kg 24.4 x 5.35 x 5.3 in / 4.19 lb Complies with CE standards. ESD Safe. 7 Warranty JBC's 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear or misuse. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased. This product should not be thrown in the garbage. In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility. 0031825-070524Adobe PDF Library 17.0 Adobe InDesign 19.4 (Windows)