NEBO 4000 Lumen Rechargeable Tripod Light

Product Overview

The NEBO 4000 Lumen Rechargeable Tripod Light is a powerful and versatile lighting solution designed for various applications, including job sites and outdoor use. It offers high brightness and convenient portability.

Specifications

• Lumens: 4000lm
• Protection Class: IPX4
• Operating Temperature: -10°C to 40°C
• Input: 16.8V, 2.8A
• Wattage: 70W
• Battery Type: Lithium Ion 14.8V, 4000mAh
• Charge Time (AC): Approximately 6 Hours
• Run Time: Approximately 1.5 Hours
• Dimensions (Closed): 920mm x 120mm x 160mm
• Weight: 6100g

Included Items

• 1 x 4000 Lumen Tripod Light
• 1 x Carry Bag
• 1 x Power Transformer (4m cable)
• 1 x EU 220v Domestic Adapter
• 1 x UK 240v Domestic Adapter
• 1 x UK 110v Site Adapter

Charging Instructions

To charge the NEBO Rechargeable Tripod Light:

1. Connect the appropriate power adapter cable to the included power transformer.
2. Plug the barrel connector into the AC charging port on the light.
3. The charging process will begin automatically. The charge indicator LED will show 100% when fully charged.
4. A full charge may take up to 6 hours.

Important: Ensure the light and power cable are not damaged before charging or use. Do not use if damage is found.

Setup and Operation

Setting Up the Tripod Light

To set up the tripod:

1. Pull the tripod legs outward and then downward until they lock securely (you will hear a click).
2. Insert the quick-release bolt into the tripod base plate; the bolt will lock into place.
3. To release the light, pull the quick release and lift the light upwards.

Adjusting Height

To adjust the height:

1. Hold the tripod firmly in place.
2. Open the lower quick-release clamp.
3. Slide the tripod head to the desired height.
4. Close the clamp to lock the position.
5. For additional height, open the upper quick-release clamp and repeat the previous steps.

Operating the Light

The light features a single ON/OFF button and a color temperature button:

• Power: Press the ON/OFF button once to turn the light on.
• Brightness Levels: With the light on, press the ON/OFF button repeatedly to cycle through brightness settings: 100%, 75%, 50%, 25%.
• Power Off: Press the ON/OFF button once more to turn the light off.
• Color Temperature: Press the color temperature button to switch the LED output between cool white (CCT4K) and warm white (CCT7K) light.

The charge indicator LED shows the charging status.

Closing the Tripod Light

To close the tripod:

1. Pull the leg release clamp outward on each tripod leg.
2. Push the tripod downwards.
3. Fold the three tripod legs back towards the frame until the leg release clamp locks into place.

Safety Precautions and Storage

• Ensure the correct voltage is available before use.
• Before each charge, verify that the light and power cable are not damaged. Never use the light if damage is found.
• Do not use the light in explosive environments where flammable liquids, gases, or dust are present.
• Always ensure the tripod is erected on a level surface to avoid the risk of falling.
• LED lights are extremely bright; do not look directly at the lamp.
• Do not attempt to disassemble or repair the light yourself.
• When possible, store the light in the supplied carry bag.

Additional Information

For more information, detailed video instructions, and warranty registration, scan the QR code or visit NEBOlights.com.