VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and moreCurved Corner Table Top – VIVO - desk solutions, screen mounting, and more
Instruction Manual for VIVO models including: DESK-TOP2CB, DESK-TOP2CG, DESK-TOP2CC, DESK-TOP2CN, DESK-TOP2CD, DESK-TOPCW, DESK-TOP2CB Series Curved Corner Triple Motor Electric Desk, DESK-TOP2CB Series, Curved Corner Triple Motor Electric Desk, Corner Triple Motor Electric Desk, Triple Motor Electric Desk, Motor Electric Desk, Electric Desk
E3 Series - Curved Corner Triple Motor Electric Desk with Push Button – VIVO - desk solutions, screen mounting, and more
Curved Corner Table Top – VIVO - desk solutions, screen mounting, and more
File Info : application/pdf, 8 Pages, 883.88KB
DocumentDocument71" x 71" Curved Table Top DESK-TOP2CB Series Assembly Manual Individual Product SKUs DESK-TOP2CB DESK-TOP2CG DESK-TOP2CC DESK-TOP2CN DESK-TOP2CD DESK-TOPCW WARNING If you do not understand these directions, or if you have any doubts about the safety of the installation, please contact our product support team at 309-278-5303 or help@vivo-us.com for further assistance. Check carefully to make sure there are no missing or defective parts. Failure to report missing parts within 30 days may result in denial of free replacement. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use. WARNING: CHOKING HAZARD SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED. Need Help? We're Here For You US-Based Customer Support from Trained Professionals Monday-Friday from 7am-7pm CST Saturday 8am-4pm CST Email Us Chat with Live Agent help@vivo-us.com www.vivo-us.com Give Us a Call 309-278-5303 ext. 1 Assembly Video & Product Info www.vivo-us.com/products/desk-top2cb 2 Package Contents A (x1) Right Panel C (x1) Right Middle Panel E (x6) Support Bar Included Hardware S-A (x24) ST4.2x20mm Screw S-B (x10) Wooden Dowel Pin Tools Needed: Phillips Screwdriver B (x1) Left Panel D (x1) Left Middle Panel 3 Assembly Steps STEP 1 Place Panels (A, B, C, D) upside-down on a protective surface. Insert Wooden Dowel Pins (S-B) into the edges of each Panel and connect them together as shown. C A D B Protective Surface S-B 4 STEP 2 Attach Support Bars (E) to the desktop assembly using ST4.2x20mm Screws (S-A) and a Phillips screwdriver. S-A E 5 STEP 3 Place desk frame (not included) upside-down onto the Desktop and adjust the frame to line up with the pilot holes. Secure the frame to the Desktop using hardware provided with your frame. Desktop Mount your control panel (not included) to the mounting holes on the left or right side of the Desktop using hardware provided with your frame. Desktop 6 Love Your New Setup? Tag Us on Social! @ VIVO-us @ vivo_us @VIVOus VIVO LAST UPDATED: 04/07/25 REV1.2 v2.0 Need Help? We're Here For You Monday-Friday from 7am-7pm CST Saturday 8am-4pm CST Email Us Chat with Live Agent help@vivo-us.com www.vivo-us.com Give Us a Call 309-278-5303 ext. 1 VIVO-us @vivo_us @VIVOus VIVO FOR MORE GREAT VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: WWW.VIVO-US.COM