DABBSSON DBS1400 Pro Portable Power Station User Manual

User Manual for DABBSSON models including: DBS1400 Pro Portable Power Station, DBS1400, Pro Portable Power Station, Portable Power Station, Power Station

DBS1400 Pro User Manual

BYT001

PDF

Dabbsson User Manual

Dabbsson User Manual | Dabbsson US

Dabbsson DBS1400Pro User Manual - touch.com.ua

Dabbsson DBS1400Pro User Manual 5V 2.4A PD 30W 12V ON/O F 10A IOT RESET USB ON/OFF 4A LIGHT ON/O F FAST CHARGE PD 100W

File Info : application/pdf, 64 Pages, 3.38MB

25s5xpcf6y8i1s32mtoeo0bzmxxfpjgz

Dabbsson DBS1400Pro User Manual

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

DISCLAIMER
Read all safety tips, warning messages, terms of use, and disclaimers carefully. Refer to the terms of use and disclaimer at https://www.dabbsson.com and stickers on the product before use. Users take full responsibility for all usage and operations. Familiarize yourself with the related regulations in your area. You are solely responsible for being aware of all relevant regulations and using Dabbsson products in a way that is compliant.

CONTENTS

1. Specifications

2. Safety Instructions

2.1 Usage

2.2 Disposal Guide

3. Product Details

3.1 Overview

3.2 LCD Screen

4. General Product Usage

4.1 Charging DBS1400Pro
AC Charging Solar Charging

6
Car Charging Using Smart Extra Battery

4.2 How to use extra batteries pack and parallel connection

Adding extra battery pack

Precautions

4.3 Parallel Connection Function

4.4 Control the product

Power On/Off

4.5 Charging Your Devices

AC oulets DC outlets

P-Boost and EPS

5. App Control

6. FAQs

7. Troubleshooting

8. What's in the Box

9. Storage & Maintenance

10. Fcc Statement

1. Specifications

General Info
Net Weight Dimensions Capacity Wi-Fi BT Certification

Approximately 20.5kg (45.2lbs) 432x254.5x303mm (17x10x12in) 1382Wh (51.2V 27Ah) Supports 2.4G: 2412-2472MHz with a maximum of 14.9 dBm Supports BDR+EDR: 2402-2480MHz with a maximum of 2.5 dBm ETL FCC PSE WEEE ROHS TELEC

Output Ports
AC (x4) USB-A (x1) USB-A Fast Charge (x2) USB-C (x2) USB-C (x1) Car Charge DC5521 Output (x2) Main Unit + Extra Battery

Pure Sine Wave,2400W total (surge 4800W),120V~ (50/60Hz) 5V 2.4A, 12W Max 5V 3.0A 9V 2A 12V 1.5A, 18W Max 5/9/12/15V 3A, 20V 5A 100W Max 5/9V 3A, 12V 2.5A, 15V 2A, 20V 1.5A, 30W Max 12.6V 10A, 126W Max 12.6V 4A, 50W Max Pure Sine Wave,2400W total (surge 4800W),120V~ (50/60Hz)

* The DBS1400Pro's AC input frequency will automatically adapt to the input frequency of 50Hz or 60Hz when doing AC charging. The AC output frequency will automatically follow the AC input frequency.If you charge with different AC input that has different frequency than your current AC output frequency while doing AC output. The AC output will shut off and you need to reboot the unit.

Input Ports
AC Charge AC Input Voltage Solar Charge Car Charge Add-on

1800W Max 100-120V~ 15A Max, 50/60Hz 12-60V 25A Max, 1200W Max Supports 12V/24V Battery, 8A by default Extra Battery DBS2100B*2, Total 5120Wh

Battery Info Cell Chemistry Cycle Life
*Under 25 working environment.
1

LiFePO4 4000 Cycles to 80%+Capacity*

Protection Over Voltage Protection Over Temperature Protection Low Temperature Protection Overcurrent Protection

Overload Protection Short Circuit Protection Low Voltage Protection Over Charge Protection

Environmental Operating Temperature
Optimal Operating Temperature Discharge Temperature Charging Temperature Storage Temperature

20~30(68~86) -10~45(14~113) 0~45(32~113) -10~45(14~113)

* Whether the product can be charged or discharged depends on the actual temperature of the battery pack.

2. Safety Instructions
2.1 Usage
1. Do not use the product near a heat source, such as a fire source or a heating furnace. 2. Avoid contact with any liquid. Do not immerse the product in water or get it wet. Do not
use the product in rain or humid environments. 3. Do not use the product in an environment with strong static electricity or magnetic fields. 4. Do not disassemble the product in any way or pierce the product with sharp objects. 5. Avoid using wires or other metal objects that may result in a short circuit. 6. Do not use unofficial components or accessories. If you need to replace any components or
accessories, visit official Dabbsson channels to check for relevant information. 7. It is highly recommended that third-party accessories are purchased from reliable
distributors and that they match your product's specifications. Dabbsson is not liable for abnormality, inconvenience, losses or expenses resulting from defective third-party accessories.
2

8. When using the product, please strictly follow the operating environment temperature specified in this user manual. If the temperature is too high, it may result in a fire or explosion; if the temperature is too low, the product performance may be severely reduced, or the product may cease to work.
9. Do not forcibly lock the fan during use or place the product in an unventilated or dusty area. 10. Avoid impact, falls, or severe vibrations when using the product. In case of a severe
external impact, turn off the power supply immediately and stop using the product. Ensure the product is well fastened during transportation to avoid vibrations and impacts. 11. If you accidentally drop the product into water during use, place it in a safe open area, and stay away from it until it is completely dry. The dried product should not be used again, and should be properly disposed of according to Section 2.2 below. If the product catches fire, we recommend that you use the fire extinguishers in the following order: water or water mist, sand, fire blanket, dry powder, and finally a carbon dioxide fire extinguisher. 12. Use a dry cloth to clean off dirt on the product ports. 13. Rest the product on a flat surface to avoid damage caused by the product falling over. If the product is overturned and severely damaged, turn it off immediately, place the battery in an open area, keep it away from combustible matter and people, and dispose of it in accordance with local laws and regulations. 14. Ensure that the product is kept out of reach of children and pets. 15. The smart extra battery can only be connected to the host, and the smart extra battery cannot be connected to each other. 16. If the product experience short circuit protection multiple times, the BMS will lock the product and you'll need to recharge it through AC to reactivate it. 17. Press and hold the main power button for more than 6 seconds, and the unit can perform a self-check and restore.
2.2 Disposal Guide
1. If conditions permit, make sure that the battery is fully discharged before disposing of it in a designated battery recycling bin. The product contains batteries with potentially dangerous chemicals, so it is strictly prohibited to dispose of it in ordinary trash cans. For more details, please follow the local laws and regulations on battery recycling and disposal.
2. If the battery cannot be fully discharged due to a product failure, do not dispose of the battery directly in the battery recycling box. In such cases, contact a professional battery recycling company for further processing.
3. Please dispose of over-discharged batteries that cannot be recharged.
3

3. Product Details
3.1 Overview

1 2 3 4 5
6

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

8
9
10 11 12 13

1 USB-C 30W Output Port 4 USB ON/OFF 7 Main Power Button 10 DC5521 Output Port 13 LED

7
2 USB-A Output Port 5 USB-C 100W Output Port 8 LCD Screen 11 12V DC Power Button

3 USB-A Fast Charge Output Port 6 LIGHT ON/OFF 9 Car Output Port 12 IOT Reset Button

14 15
16

AC CHARGE SPEED

SOLAR/CAR INPUT

AC CHARGE

OVERLOAD PROTECTION

DATA

EXTRA BATTERY PORT

AC NO/OFF PARALLEL PORT

14 Solar/Car Charging Input Port 17 AC Charging Input Port 20 AC Power Button 23 Parallel Connection Port *

15 AC Charge Speed Switch
18 Overload Protection 21 AC Output Portx3*

16 Extra Battery Port 19 Product Upgrade Port * 22 AC Output Port30A*

* "Product Upgrade Port" is only used by the manufacturer for upgrading. * "AC Output Port" Output port styles vary by country or region.

* "Parallel Connection Port" Parallel connection port is only used for parallel connecting with another DBS1400Pro.

3.2 LCD Screen

b a

f hj

ce gi

l m

n o

p q

a Error Code d Overload Warning g AC Output Frequency j USB-C Output m Solar Panel Indicator p Battery Level Indicator s Fan Indicator

b Low Temperature Warning e Connection Failed h DC Output k AC Input n Remaining Charge/Discharge Time q Remaining Battery Percentage t Pairing Indicator

c High Temperature Warning f AC Output i USB-A Output l Extra Battery Indicator o Input Power r Wi-Fi Status u Output Power

Battery Level Indicator When charging, the icon rotates clockwise. When the battery level of this product at 0%, AC and DC output will turn off and this icon will start flashing; When the battery level is 100%, this icon is the full grid state.
Wi-Fi Status Press and hold the IOT button for 3 seconds, and the Wi-Fi icon will flash, indicating that the product is ready for pairing. If the product pairing is completed, the Wi-Fi icon will stay on.

4. General Product Usage
4.1 Charging DBS1400Pro

AC CHARGE SPEED

SOLAR/CAR INPUT

AC CHARGE

OVERLOAD PROTECTION

DATA

EXTRA BATTERY PORT

AC Charging
Dabbsson fast charge technology is specifically for AC charging, offering 1800W of max input power. You can control the charging power through the AC Charge Speed Switch. The default max input power for the AC charging speed is 600W, which can be modified in the Dabbsson app. In case of unusual situations where the AC input current remains higher than 20A, the charging input port will initiate a self-protection function, and the Overload Protection Switch on the product will automatically pop up. After confirming that there is no product failure, you can press the Overload Protection Switch to resume charging.
Frequency Change
The AC frequency is 50Hz by default. If your local grid power has different frequency, please charge this unit with the AC charging cable. Then the frequency will automatically change to your local frequency.
6

Fast Charging 1800W Max Input Power
1.5 hrs Full Charge

AC CHARGE SPEED

SOLAR/CAR INPUT

AC CHARGE

OVERLOAD PROTECTION

DATA

EXTRA BATTERY PORT

AC Charging Cable

AC CHARGE SPEED

SOLAR/CAR INPUT

AC CHARGE

OVERLOAD PROTECTION

DATA

EXTRA BATTERY PORT

Fast Charging 1200W Max Input Power

Customized Charging Power Rate Range 50-1800W
(Default:600W)
The charging power can be adjusted through the AC Charge Speed Switch on the side of the product. You can set the charging power range in the Dabbsson App.
Please use the AC Charging Cable included in the package for fast charging. Do not use other cables to charge. Plug directly into an AC wall outlet and make sure that the wall output current is more than 15A.Otherwise, reduce the unit charging speed with the AC Charge Speed Switch. Dabbsson takes no responsibilities for any consequences caused by failures to follow instructions, including but not limited to charging with other AC charging cables.
Solar Charging
Users can connect solar panels in series as shown in the figure to recharge the product. The product supports 12-60V(75V Max) DC input, 25A max current, and 1800W max charging power.
7

Connection with Solar Panel 200W Solar Panel

Connect XT60 Port

MC4 Connection

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

Connection with Solar Panel

Connect XT60 Port

200W Solar Panel (x2) Connection with Solar Panel

MC4 Connection

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

Connect XT60 Port

MC4 Connection

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

200W Solar Panel (x3) 8

Connection with Solar Panel

Connect XT60 Port

MC4 Connection

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

200W Solar Panel (x6)
When charging the product with a Dabbsson solar panel, follow the instructions of this user manual to avoid damage to the product.
Note: 1. Solar panels with different wattages or voltages are not recommended to be used together, either in
series or in parallel, because the solar conversion rate will be very low in this case. 2. When using solar panels, it is best to place them in an unobstructed area. If they are partially blocked
or obstructed by balcony railings for a long period of time, it can cause damage to the solar panels.
Car Charging
Users can recharge the product through the Car Outlet. It supports 12V/24V car chargers and an 8A default charging current. Only charge using the car charger after you've started the car.This prevents the car from failing to start due to insufficient battery power. In addition, please make sure that the cigarette lighter of the Car Outlet and the Car Charger Input Cable are in good condition. Dabbsson takes no responsibilities for any losses or damage caused by failures to follow instructions.
9

Car Charging

Car Charging Cable

AC CHARGE SPEED

SOLAR/CAR INPUT

AC CHARGE

OVERLOAD PROTECTION

DATA

EXTRA BATTERY PORT

XT60 Port

4.2 How to use extra batteries pack and parallel connection
Adding extra battery pack DBS1400 Pro can be connected to two extra batteries to add more capacity. For more info please refer to the extra battery user manual.
Such as: DBS1400Pro can expand the capacity by 1 DBS2100B battery pack to 3532Wh. DBS1400Pro can expand the capacity by 2 DBS2100B battery pack to 5682Wh. Please refer to Dabbsson support youtube channel for detailed installation instructions.

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

DBS1400Pro
Voltage:120V Rated AC Output:2000W Capacity:1382Wh

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

FAST CHARGE

USB ON/OFF

PD 100W

DBS1400Pro+DBS2100B
Voltage:120V Rated AC Output:2400W Capacity:3532Wh

FAST CHARGE

USB ON/OFF

PD 100W

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

FAST CHARGE

USB ON/OFF

PD 100W

DBS1400Pro+DBS2100B*2 Voltage:120V Rated AC Output:2400W Capacity:5682Wh
10

Precautions
1. Turn off both the Extra Battery DBS2100B and DBS1400Pro before plug or unplug the extra battery.
2. Before using, make sure both DBS1400Pro and Extra Battery DBS2100B display the extra battery icon on their LCD screens.
3. Do not touch the metal terminals of the Extra Battery DBS2100B connector. If the metal terminals need to be cleaned, gently wipe them with a dry cloth.
4. When the DBS1400Pro power station and DBS2100B expandable battery are not in use, please remove the connecting cable.
5. To protect the battery from over-discharging, please unplug the cable when the unit is fully charged or not in use.
6. When the device is running, inserting or unplugging the parallel cable will turn off the output of the host. You need to press the host button again to unlock it, and then press the output switch.
7. When upgrading the product, please discount all the input connectionsAC input Cable, DC input cable).
8. When the product is turned off and connected with low solar input, pressing the power on button will cause the solar charging function to be invalid. Please keep the product on when connecting low solar input. If the solar input is high enough, the product will automatically start charging when the product is turned off.
9. Please make sure all the connection is cut from the main unit when doing OTA update. Updating the Extra battery pack requires to connect it with the main unit.
10. Connect with extra battery pack to add capacity and boost power.

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

FAST CHARGE

USB ON/OFF

PD 100W

FAST CHARGE

USB ON/OFF

PD 100W

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

FAST CHARGE

USB ON/OFF

PD 100W

4.3 Parallel Connection Function
DBS1400Pro supports the parallel function, which can increase the output power and expand the battery capacity. Using our special parallel connector and connecting wires, two products can be connected, and the output power will be increased to 3600W Max, and the battery capacity will be expanded to 5120Wh. At the same time, this product also supports parallel operation, two products are respectively connected to two DBS2100B and powered on (2*DBS1400Pro+4*DBS2100B), at this time the capacity can be expanded to 10240Wh. You can use this product as a home backup power station in case of a power outage. (If connecting to grid power during parallel connection, the inverter will quit parallel connection and enter charging and bypass mode). Reminder: The parallel connector need to be purchased separately; for detailed parameters,
please refer to the manual of the parallel connector.
DBS1400Pro*2+A20SParallel Connector

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

Voltage:120V Rated AC Output:4400W Capacity:2764Wh

DBS1400Pro*2+DBS2100B*2+A20SParallel Connector

FAST CHARGE

USB ON/OFF

PD 100W

FAST CHARGE

USB ON/OFF

PD 100W

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

Voltage:120V Rated AC Output:4400W Capacity:7064Wh

DBS1400Pro*2+DBS2100B*4+A20SParallel Connector

FAST CHARGE

USB ON/OFF

PD 100W

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

FAST CHARGE

USB ON/OFF

PD 100W

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

FAST CHARGE

USB ON/OFF

PD 100W

FAST CHARGE

USB ON/OFF

PD 100W

Voltage:120V Rated AC Output:4400W Capacity:11364Wh

4.4 Control the product

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

Short Press to Turn On/Long Press to Turn Off
Power On/ Off, LCD Screen On
Short press the Main Power Button to start the product, the LCD screen lights up and displays an icon. It will automatically turn off after the product is idle for 5 Minutes.When the device senses any load change or operation, the display screen will automatically light up. To turn the display on or off, briefly press the Main Power Button. To turn off the device, long press the Main Power Button.

4.5 Charging Your Devices
AC Output Port After turning on the main power button, short press the AC power button to use the AC output port. Press the button again will turn it off. The unit is set to never shut off by default when the AC output is on. You can schedule and change the unit shutoff time and start up time on Dabbsson App.
12V DC Output Port After turning on the main power button, short press the 12V DC power button to use the 12V DC output port. Press the button again will turn it off. When the 12V DC power button is turned on, the product does not automatically turn off.

AC NO/OFF
PARALLEL PORT
Short Press AC Power Button

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

Short Press 12V DC Power Button
14

P-Boost This product adopts P-Boost technology, which can supply power for electrical appliances with a maximum of 3000W, while keeping the output power within 2000W, so as to avoid operation failure caused by the activation of overload protection. The P-Boost function needs to be controlled by the Dabbsson APP.
P-Boost Tips 1. The P-Boost function is not available when the product turns on the AC output while in the
charging state, parallel state or when the P-Boost mode is turned off in the Dabbsson APP.
2. P-Boost is not applicable for all electrical appliances; it's incompatible with appliances with strict voltage requirements and a rated power over 2000W. Appliances with voltage protection (such as precise instruments) are not supported. P-Boost mode is more suitable for heating devices. Please conduct your own tests with your devices with P-Boost enabled.
Emergency Power Supply (EPS)
The product supports EPS. When you connect the grid power to the AC Input Port of the product through an AC cable, you can power electrical devices through the AC Output Port (AC power will come from the grid and not the power station in this situation). In case of a sudden blackout, the product can automatically switch to the battery powered supply mode within 15ms. As a basic UPS function, this function does not support 0ms switching. Please do not connect the product to any device that requires 0ms UPS, such as data servers and workstations. Please test and confirm the compatibility before using the product. We recommend that you only charge one device at a time and avoid using multiple devices at the same time to avoid overload protection. Dabbsson takes no responsibilities for any device failures or data losses caused by failures to follow instructions.(When the AC output load is greater than the input load, only the battery can be used for power supply. Only when the AC output load is less than the input load, can it be charged while discharging.)

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

AC ON/OFF PARALLEL PORT

5. App Control

Download Dabbsson APP
1 Search for "Dabbsson" in the APP Store (for iOS devices) or Google Play (for Android devices) to download the Dabbsson App.

2 You can download the app on the App Store and Google Play by scanning the QR codes below.

Android

iOS

3 Download the Dabbsson APP on the official website: www.dabbsson.com
Connecting the APP to the product Method 1: Bluetooth Connection Mode 1 Connect the mobile phone to home 2.4G Wi-Fi network, open the DABBSSON APP, select
"+Add Device" or the "+" symbol on the upper right corner of the home page.

2 Tap to open BT authorization dialog box and select "Go to set up" and then "Allow New Connections".

3 Wait for the unit to search nearby device.

4 After the device is found, select "Add".

5 Enter home Wi-Fi name and passwords and select "Next step".

6 Add the power station and wait for it to connect.

7 Select "Done" after the device is add successfully.

If the adding failed and shows following interface, please select "Reconnect" until the complete interface appears.

8 After complete adding the device, select a UI style and select "Set to selected style" and enter the APP control interface.
Method 2: Wi-Fi Connection Mode 1 Connect the mobile phone to home 2.4G Wi-Fi network, open the DABBSSON APP, select
"+Add Device" or the "+" symbol on the upper right corner of the home page.
19

2 Select device model.

3 Long press the "IOT RESET" button on the device until you hear a "beep" and let go. Then select "Next step".

4 Enter home Wi-Fi name and passwords and select "Next step". 20

5 Tap "Go to connect" and enter the phone's Wi-Fi setting. Select the Power station hotspot and connect to that hotspot.
6 Go back to the APP interface, confirm the connection and wait for the device to connect.
21

7 After the device is added successfully, select "Start using".

If the adding failed and shows following interface, please select "Reconnect" until the complete interface appears.

8 After complete adding the device, select a UI style and select "Set to selected style" and enter the APP control interface. After successfully connecting and adding the power station through Wi-Fi for the first time, the APP can still operate the power station through BT offline after leaving the Wi-Fi network environment, but it must be within 10 meters.
22

Power station firmware update 1 Tap the device you want to upgrade, enter the device interface, tap the icon in the upper right corner
to enter the setting page, find and click the firmware update option, enter the device update page, click "Update" at the bottom of the page, click "Confirm" on the pop-up window, wait for the firmware update, After success, click Confirm to complete the update.
23

2 If the power station's firmware update failed, please try again.
Privacy Policy By using Dabbsson Products, Applications and Services, you consent to the Dabbsson Term of Use and Privacy Policy, which you can access via the "support" section on the Dabbsson App or on the official Dabbsson website at https://www.dabbsson.com
24

6. FAQs
1. What type of batteries does the product use? This product uses high-quality LiFePO4 battery.
2. What devices can use the product's AC output port power? With 2400W rated power and 4400W peak power, the product's AC output port can power most household appliances. Before using we recommend you check the power of the appliances first and ensure the power sum of all loaded appliances is lower than the rated power.
3. How long does it take for the product to charge my devices? The charging time is shown on the product's LCD Screen, which can be used to estimate the charging time of most appliances with stable power usage.
4. How can I tell if the product is charging? The remaining charging time will be shown on the LCD Screen. The charging indicator will display remaining battery percentage, while current input power is shown to the right of the charging indicator.
5. How do I clean the product? Please gently wipe it with a dry, soft, clean cloth or paper towel.
6. How should I store the product? Before storing, turn off the product first, and then store it in a dry,ventilated area at room temperature.Do not place it near water sources. For long-term storage, discharge the battery to 30% and recharge it to 100% every three months to extend its battery life.
7. Can I bring the product on a plane? No
8. What is the minimum wattage of solar input you recommend? Due to the large capacity and high output power of this product, it is recommended that the solar input power should be at least 30-50W.
25

7. Troubleshooting

Indicator (Flashing)

Problem
USB-A Overload Protection
High Temperature Charge Protection

Solution
Resume normal operation by removing the electrical device connected to the
USB-A port.
Charging will automatically resume after the battery cools down.

High Temperature Discharge Protection

Power supply will automatically resume after the battery cools down.

Low Temperature Charge Protection

Charging will automatically resume after battery temperature rises above -10(14).

Low Temperature Discharge Protection

Power supply will automatically resume after the battery temperature rises above -20(-4).

(Flashing)

AC Output Overload Protection

Normal operation will automatically resume after you remove the overloaded
device and restart the product.

AC High (Flashing)
Temperature Protection

Check whether the fan inlet and/or outlet are blocked. If not, normal operation will automatically resume
after the product cools down.

(Flashing)

Fan Blockage

Please check if the fan is blocked.

DC Output (Flashing) Overload Protection

The product will automatically resume normal operation after you remove the
device connected to the DC outlet.

DC Output High

The product will automatically resume

(Flashing)

Temperature Protection normal operation after it cools down.

Others

Contact Dabbsson Customer Service

8. What's in the Box

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

DBS1400Pro

Solar Charging Cable

Dabbsson DBS1400Pro User Manual

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

User Manual

Car Charging Cable
24-MONTH WARRANTY
CLAIM YOUR WARRANTY Warranty Activation
Activate your warranty at www.dabbsson.com
Register Porduct Fill in Your Information Keep the original packaging & accessories
Products must be returned in their original condition and packaging with all included accessories for the warranty to be valid.
Have any question? Chat with a specialist today. US: support.us@dabbsson.com EU: support.eu@dabbsson.com
+1 888 850 9503 Mon-Fri 9am-5pm (PST) Follow Us
@Dabbsson_Global @DabbssonOfficial @Dabbsson_Official If you have any question, please do not hesitate to contact us.
Warranty Card

AC Charging Cable

DIY Instructions for Non-MC4 Connector Solar Panels

For users who use universal solar panels with non-MC4 connectors to power the device, please note solar panels should be within voltage and current range (please find more information on requirements in the user guide).
Improper connection of MC4 connector to your device could damage the device. Dabbsson does not take responsibility for equipment failure due to personal misoperation.

Please confirm the positive and negative poles of your solar panel.
Please connect the positive pole of the solar panel to the MC4 male connector and the negative pole to the MC4 female connector.

1 MC4 Port

2 Please connect the positive pole to the MC4 male connector and the negative pole to the MC4 female connector.

MC4 male

MC4 female

Positive pole

Negative pole

3 Connect your solar panel to the Dabbsson solar panel charging cable (MC4 to XT60)
Before connecting the solar panel, make sure that the positive pole of the solar panel is connected to the MC4 male connector and the negative pole is connected to the MC4 female connector (as shown in the figure below).

Dabbsson solar panel charging cable

Warning Card

9. Storage & Maintenance
1. Ideally,you should use and store the product at an ambient temperature between 20-30 (68-86), and always keep it away from water, intense heat, and sharp objects. Do not store in temperatures above 45 (113) or below -10 (14) for an extended period.
2. Storing a battery with a low charge for a long period shortens its lifespan. DBS2100 mitigates the damage by putting the battery into hibernation mode. To get the most out of the battery, make sure it is at about 100% before putting DBS2100 into long-term storage. While in storage, it is recommended to discharge the battery to 30% and recharge it back to 100% every three months.

10. FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1This device may not cause harmful interference. 2This device must accept any interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20cm between the radiator & your body.
28

Dabbsson DBS1400Pro

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

Dabbsson Dabbsson DabbssonWeb

2.1

2.2

3.1

3.2

4.1
AC

4.2

4.3

4.4

4.5
AC DC

14 P-BoostEPS

5. APP

6. FAQs

Wi-Fi BT

20.5kg (57.8lbs) 432x254.5x248mm (17x10x9.5in) 1382Wh (51.2V 27Ah) 2.4G

AC(x4) +

2400W ( 4800W),100V~(50/60Hz) ,2000W,2400W ( 4800W),100V~(50/60Hz)

USB-A (x2)

5V 3.0A 9V 2A 12V 1.5A, 18W

USB-A (x1)

5V 2.4A, 12W

USB-C (x1) USB-C (x2)

5/9V 3A, 12V 2.5A, 15V 2A, 20V 1.5A, 30W 5/9/12/15V 3A, 20V 5A 100W

DC5521 (x2)

12.6V 10A, 126W 12.6V 4A, 50W

* ACDBS1400ProAC50Hz60HzAC AC

AC AC /

1500W 100V~ 15A, 50/60Hz 12-60V(75V) 25A, 1200W 12V/24V 8A DBS2100B*2, 5120Wh

*25
1

LiFePO4 804000*

20~30(68~86) -10~45(14~113) 0~45(32~113) -10~45(14~113)

2.
2.1
1. 2.
3. 4. 5. 6.
Dabbsson Dabbsson
2

7.
8. 9.
10.
11.
2.2 12. 13. 14. 15. 16.BMSAC
2.2
1.
2.
3.2. 4.DabbssonDabbsson
() line
3

3.
3.1

1 2 3 4 5
6

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

8
9
10 11 12 13

1 USB-C 30W 4 USB 7 10 DC5521 13 LED

7
2 USB-A 5 USB-C 100W 8 11 12V DC

3 USB-A 6 / 9 DC 12 IOT

14 15
16

AC CHARGE SPEED

SOLAR/CAR INPUT

AC CHARGE

OVERLOAD PROTECTION

DATA

EXTRA BATTERY PORT

AC NO/OFF PARALLEL PORT

17 AC

20 AC 23 *

15 AC
18 21 ACx3*

16 19 *
22 AC30A

*""DABBSSON * AC *DBS1400Pro

3.2

b a

f hj

ce gi

l m

n o
a d g AC j USB-C m p s

p q

b e h DC k AC n / q t

c f AC i USB-A l o r Wi-Fi u

0%1 100%

Wi-Fi
OT3Wi-Fi APP WIFIBluetoothBluetooth WIFI Bluetooth
5

4.
4.1

AC CHARGE SPEED

SOLAR/CAR INPUT

AC CHARGE

OVERLOAD PROTECTION

DATA

EXTRA BATTERY PORT

AC
DabbssonAC1800W AC AC600WDabbsson AC20A

50HzAC AC
6

1500W 1.5

AC CHARGE SPEED

SOLAR/CAR INPUT

AC CHARGE

OVERLOAD PROTECTION

DATA

EXTRA BATTERY PORT

AC CHARGE SPEED

SOLAR/CAR INPUT

AC CHARGE

OVERLOAD PROTECTION

DATA

EXTRA BATTERY PORT

1800W

50-1800W
(600W)
ACDabbsson ACACAC15A 15AAC

12-60V(75V) DC25A1800W
7

200W

XT60

MC4

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

XT60

MC4

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

200W (x2)

XT60

MC4

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

200W (x3) 8

XT60

MC4

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

200W (x6)
Dabbsson
: 1. 2.

12V24V8A .

AC CHARGE SPEED

SOLAR/CAR INPUT

AC CHARGE

OVERLOAD PROTECTION

DATA

EXTRA BATTERY PORT

XT60

4.2
DBS1400Pro2DBS2100B
DBS1400ProDBS2100B13532Wh DBS1400ProDBS2100B25682Wh Dabbsson youtube

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

DBS1400Pro
:100V AC:2000W :1382Wh

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

FAST CHARGE

USB ON/OFF

PD 100W

DBS1400Pro+DBS2100B
:100V AC:2400W :3532Wh

FAST CHARGE

USB ON/OFF

PD 100W

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

FAST CHARGE

USB ON/OFF

PD 100W

DBS1400Pro+DBS2100B*2
:100V AC:2400W :5682Wh

1.DBS1400ProDBS2100B
2.
3.
4.DBS1400Pro 5. 6.
7. 8.
9.OTAOver-the-Air 10.

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

FAST CHARGE

USB ON/OFF

PD 100W

FAST CHARGE

USB ON/OFF

PD 100W

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

FAST CHARGE

USB ON/OFF

PD 100W

4.3
DBS1400Pro 22DBS1400Pro3600W 5120Wh2DBS2100B (2*DBS1400Pro +4*DBS2100B)10240Wh :
DBS1400Pro*2+A20S

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

:100V

AC:4400W

:2764Wh

DBS1400Pro*2+DBS2100B*2+A20S

FAST CHARGE

USB ON/OFF

PD 100W

FAST CHARGE

USB ON/OFF

PD 100W

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

:100V

AC:4400W

:7064Wh

DBS1400Pro*2+DBS2100B*4+A20S

FAST CHARGE

USB ON/OFF

PD 100W

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

FAST CHARGE

USB ON/OFF

PD 100W

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

FAST CHARGE

USB ON/OFF

PD 100W

FAST CHARGE

USB ON/OFF

PD 100W

:100V

AC:4400W

:11364Wh

4.4

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

1/3
ON/OFF/
OFF5

4.5
AC
ACAC AC
STANDBYAC/DC AC20W ACDC 2WDC ACDC2

AC NO/OFF PARALLEL PORT
AC

12V DC
DCDC DCDC

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

12V DC 14

P-Boost
Dabbsson P-Boost3000W 2000WDabbsson APPP-Boost
P-Boost
1.ACDabsson APPP-Boost P-Boost
2.P-Boost 1200W P-Boost P-Boost P-Boost
EPS (Emergency Power Supply)
EPSACAC 15ms EPS0ms0ms UPS EPS EPS AC EPS 1 ACAC EPS

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

AC ON/OFF PARALLEL PORT

5. APP

1 APP Store (iOS) Google Play (Android)Dabbsson Dabbsson

2 QRApp Store Google Play

Android

iOS

3 Dabbsson APP: www.dabbsson.com

APP
1:
1 2.4G WIFIDabsson APP + IOT RESET

2 Bluetooth BluetoothBluetooth

5 2.4G WI-FI

WI-FI

8
2: 1 2.4G WIFIDabsson APP +

3 IOT RESET

4 2.4G WI-FI 20

5 WLANDabbsson
6
21

WI-FI

8 Wi-FiWi-Fi APPBluetooth10
22

1
OK
23

2
Dabbsson Dabbsson
24

6. FAQs
1.? (LFP)
2.AC? 2400WAC
3.?
4.?
5.?
6.? 3130100
7.
8.W 20W 45°
25

() USB-A

-10(14°F)

() AC

()

() DC () DC

-20(-4°F)

Dabbsson
( Line:@228btbla)
26

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

DBS1400Pro

Dabbsson DBS1400Pro User Manual

5V 2.4A

PD 30W

FAST CHARGE

PD 100W

USB ON/OFF

LIGHT ON/OFF

IOT RESET

10A 4A 12V ON/OFF

24-MONTH WARRANTY
CLAIM YOUR WARRANTY Warranty Activation
Activate your warranty at www.dabbsson.com
Register Porduct Fill in Your Information Keep the original packaging & accessories
Products must be returned in their original condition and packaging with all included accessories for the warranty to be valid.
Have any question? Chat with a specialist today. US: support.us@dabbsson.com EU: support.eu@dabbsson.com
+1 888 850 9503 Mon-Fri 9am-5pm (PST) Follow Us
@Dabbsson_Global @DabbssonOfficial @Dabbsson_Official If you have any question, please do not hesitate to contact us.

DIY Instructions for Non-MC4 Connector Solar Panels

Please confirm the positive and negative poles of your solar panel.
Please connect the positive pole of the solar panel to the MC4 male connector and the negative pole to the MC4 female connector.

1 MC4 Port

2 Please connect the positive pole to the MC4 male connector and the negative pole to the MC4 female connector.

MC4 male

MC4 female

Positive pole

Negative pole

Dabbsson solar panel charging cable

DIY

9.
1.20~30 (68°F~86°F) 45(113°F)-10 (14°F)
2.31(30100) 1100

References

Adobe PDF library 15.00