Pyle PLMG65 - PLMG85 Single Voice Coil Car Subwoofer

Wiring Connection

Connect the power amplifier to the positive and negative terminals accordingly as shown.

The wiring diagram illustrates how to connect a power amplifier to the subwoofer. It shows the amplifier's speaker output terminals labeled [plus sign] and [minus sign] connected to the corresponding subwoofer terminals. The diagram also indicates the amplifier's FUSE, +12V (power), REM (remote turn-on), and GND (ground) connections. A note specifies a minimum impedance of 1-Ohm at the terminal, and the overall system impedance is shown as 4 Ohms.

[plus sign] (Speaker Output +) --- [minus sign] (Speaker Output -) | 4 Ohms

Amplifier Terminals: SPEAKER OUTPUT (+/-), FUSE, +12V, REM, GND.

[Image Description: A diagram showing the rear panel of a car audio amplifier with labeled connection terminals for speaker output, fuse, +12V power, remote turn-on, and ground. It also illustrates the connection points for a subwoofer.]

Product Visuals

[Image Description: A circular car subwoofer speaker is shown from the front. It features a dark-colored cone, a silver voice coil assembly, and a robust black basket. The Pyle logo is visible.]

[Image Description: A close-up view of a car subwoofer speaker, highlighting its construction and materials.]

Features

• Paper Cone with Cloth Edge
• High-Powered Car Subwoofer
• Lab Tested Pro Audio Woofer Performance
• SVC: Single Voice Coil Sub Speaker Design
• High Strength Engineering Plastic Basket
• Quick Connect Speaker Terminal Plate
• Compatible with Sealed Enclosure Speaker Box Audio Setup
• Impressive Bass Response, Low-Resonance Frequency Output
• Designed for Custom Audio Car, Truck, Mobile Vehicle Applications

What's in the Box

• SVC Subwoofer with Grill

Technical Specifications

PLMG65 - 6.5" Single Voice Coil Car Subwoofer

150 Watts at 4-Ohm Car Audio Powered Subwoofer, Paper Cone with Cloth Edge

• Construction Materials: Engineered ABS
• Power Handling: 150 Watts MAX, 75 Watts RMS
• Impedance: 4 Ohm
• Voice Coil: 1.5" -in
• Voice Coil Type: High-Temp Aluminum
• Magnet Size: 20 Oz
• Magnet Type: Barium Ferrite Magnet
• Frequency Response: 80Hz-5500Hz
• Sensitivity: 92 dB (1w/1m)
• Product Dimensions: 6.8 " x 6.8" x 3.1" inches
• Cutout Size: 3.07" inches

PLMG85 - 8" Single Voice Coil Car Subwoofer

250 Watts at 4-Ohm Car Audio Powered Subwoofer, Paper Cone with Cloth Edge

• Construction Materials: Engineered ABS
• Power Handling: 250 Watts MAX, 125 Watts RMS
• Impedance: 4 Ohm
• Voice Coil: 1.5" -in
• Voice Coil Type: High-Temp Aluminum
• Magnet Size: 25 Oz
• Magnet Type: Barium Ferrite Magnet
• Frequency Response: 60Hz-5000Hz
• Sensitivity: 93 dB (1w/1m)
• Product Dimensions: 8.6 " x 8.6" x 3.7" inches
• Cutout Size: 7.40" inches