Starlyf Pressure Cleaner

Product Overview

This document provides operating instructions for the Starlyf Pressure Cleaner. Please read all instructions carefully before use to ensure proper operation.

Index

• 1. Warnings
• 2. Package Contents
• 3. Operating Instructions
• 4. Cleaning and Maintenance
• 5. Quality Guarantee

1. Warnings

IMPORTANT: FOR FUTURE REFERENCE, PLEASE READ CAREFULLY.

• Read this manual thoroughly before use.
• Inspect the product before each use to ensure it is not damaged or defective. Do not use if damaged.
• This product is not a toy. Keep out of reach of children.
• Use the Starlyf Pressure Cleaner with care.
• Handle the product with care.
• The product is intended for domestic use only.
• NEVER aim the product at people or animals.
• NEVER use the product with people or animals. It can cause serious injury.
• Always be attentive. Be aware of your surroundings.
• WARNING: Use the product ONLY in safe areas, AWAY from cars and traffic.
• If the product is not used for a long period, charge the battery fully before use.
• The device must not be tampered with under any circumstances. It should only be serviced or repaired by a licensed professional.
• This device can be used by persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, if they are supervised or have been instructed on the safe use of the device and understand the associated hazards.
• Children should not play with the device.
• Store your Starlyf Pressure Cleaner in a cool, dry, and moisture-free place.
• Do not expose the device to direct sunlight or leave it in a hot environment.
• Never place the device on or near heat sources.
• Never expose the product to fire, as it could explode.
• CAUTION: Never expose the battery to fire, as it can explode.
• To avoid the risk of electric shock, do not immerse the device in water or other liquids.
• Do not charge the product if it shows signs of corrosion.
• Never use the device with flammable substances or liquids.
• Note that the device is always in operation as it does not need to be connected to a power outlet.
• Never point the nozzle at a person when using the pressure cleaner.
• Ensure that electrical parts are not submerged in water.
• Do not direct the liquid at devices containing electrical components, such as the inside of ovens.
• Do not use in swimming pools with water.
• Do not use the device if it has been dropped, shows visible damage, or is leaking.
• Do not allow children to access the device when it is powered or cooling down.
• The device must only be used with the supplied power adapter.
• Refer to the following section for battery removal and insertion.
• Rechargeable batteries must be removed from the device before charging.
• Batteries must be inserted with the correct polarity.
• Spent batteries must be removed from the device and disposed of safely.
• If the device is to be stored unused for a long period, the batteries must be removed.
• The supply terminals must not be short-circuited.
• The product must only be used with Starlyf batteries.
• Use the Starlyf Pressure Cleaner only for the purposes recommended in this manual.
• Keep the packaging for future reference as it contains important information.

2. Package Contents

The set includes:

• 1 x Starlyf Pressure Cleaner (1)
• 1 x 21V Lithium-Ion Battery (2)
• 1 x Battery Charger (3)
• 1 x Long Lance (4)
• 1 x 5M Water Hose (5)
• 1 x Filter (6)
• 1 x Foam Container (7)
• 1 x 0° Nozzle (8)
• 1 x 40° Nozzle (9)
• 1 x Hose Connector (10)
• 1 x Bottle Connector (11)
• 1 x User Manual

3. Operating Instructions

Long Lance Assembly

Insert the Long Lance (4) into the front of the machine (1) by turning the part clockwise. (See Image A)

Nozzle Installation

To install the nozzles, follow these instructions:

1. While holding the head of the Long Lance (4) back, insert the 0° Nozzle (8) until you hear a click. This red nozzle is the direct jet nozzle. (See Image B)
2. While holding the head of the Long Lance (4) back, insert the 40° Nozzle (9) until you hear a click. This white nozzle is the fan spray nozzle with a 40° outlet. (See Image C)

Foam Container Assembly

To use the foam container, first fill it with your favorite soap, shampoo, detergent, or degreaser. If the soap is too thick, add some water.

To insert the container into the machine, hold the head of the Long Lance (4) back and insert the longest side of the Foam Container's lid (7) until you hear a click. (See Image D)

Hose / Bucket Assembly

Water Hose, Hose Connector, and Filter Installation

To install the water hose, connector, and filter, follow these instructions:

1. To assemble the water hose (5) into the connector (10), first remove the small piece from the connector by turning it. Then, insert one side of the hose through the small piece into the connector's recess, and then reinsert the small piece into the connector by screwing it back in. (See Image E - Step 1, 2, 3)
2. To install the hose connector (10) into the PRESSURE CLEANER by Starlyf (1), hold back the connector's head and attach it to the lower protrusion of the machine. The hose connector and water hose are then connected to the main machine. (See Image F - Step 1, 2)
3. To install the filter (6) on the other end of the water hose (5), simply insert the end of the hose into the filter's recess as shown in Image G. The filter must be submerged in the bucket water. Ensure your bucket is constantly filled with water so the filter remains submerged for proper product function.

Hose / Water Bottle Assembly

Hose Connector, Bottle Connector, and Hose Installation

To install the hose connector, bottle connector, and hose, follow this guide:

1. To assemble the bottle connector (11) into the hose connector (10), first remove the small piece from the connector by turning it. Then, insert one side of the hose into the connector's recess through the bottle connector, and then secure the bottle connector (11) into the hose connector by screwing it back in. (See Image H - Step 1, 2, 3, 4)
2. Insert the other side of the water hose into the water bottle after filling the bottle with water. Then, attach the top part of the water bottle to the hose connector by screwing it in. (See Image I - Step 1, 2)

Note: The bottle connector works with bottles with a 28 mm opening.

Note: If the entire hose does not fit into the bottle, simply cut a portion of the hose to fit the length of your bottle. Keep this cut piece for future use.

Important: Ensure the water in the bottle is completely clean and free of dirt or unwanted particles.

Battery Installation

Important: Ensure you install the battery as the final step before using the product, and only after installing other accessories.

Charge the battery (2) for 3 hours using the battery charger (3) before using the product.

During charging, a red light will illuminate. When the battery is fully charged, the charger will automatically stop charging and indicate a green light.

To install the battery into your Starlyf Pressure Cleaner, simply insert the battery into the lower part of the product, aligning the sides, as shown in Image J, until it is securely fastened. (See Image K)

To remove the battery from the device, press the red button while sliding the battery in the opposite direction of the device. (See Image L)

Operation

After installing the desired nozzle or foam container on the upper part of the machine, follow the previous instructions according to the desired usage method: bucket or water bottle.

With the battery installed, your Starlyf Pressure Cleaner is ready for use.

Aim at the area you wish to clean and press the red trigger. (See Image M)

NEVER aim the product at people or animals. It can cause serious injury.

Technical Data

• Motor: Brushed
• Power: 75W
• Rated Voltage: 21V
• 21V Li-Ion Battery Operating Time: 25 Minutes
• Battery Full Charging Time: 5-6 Hours
• Peak Pressure: 4-6 BAR
• Water Flow Rate: 2.4L/M

4. Cleaning and Maintenance

To clean your Starlyf Pressure Cleaner, simply wipe the surface gently with a damp microfiber cloth to remove dust and dirt.

Do NOT use bleach or other corrosive products on the product.

Be careful not to store the product near fire or heat sources.

Caution: Disposal of Materials

The symbol of a crossed-out wheeled bin indicates that you must inquire about and follow local regulations for the disposal of this type of product.

Do not dispose of this product as household waste.

Dispose of this product in accordance with applicable local regulations.

Electrical and electronic equipment contains hazardous substances that can have harmful effects on the environment and/or human health and must be recycled properly.

Manufactured in China.

5. Quality Guarantee

Starlyf® is a registered EU trademark. International patents pending. All imitations will be prosecuted.