Noble FoKus H-ANC
TRUE WIRELESS STEREO EARBUDS
Product Overview
The Noble FoKus H-ANC are True Wireless Stereo Earbuds designed for high-quality audio experiences.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
For charging and installation instructions, please refer to the online manual on the web page. For detailed product information, online manuals, apps, and support, visit www.nobleaudio.com.
FCC ID: 2AT8X-FOKUSH-ANC
How to pair
The Noble FoKus H-ANC will need to be paired to your device before use. Once paired, they will connect automatically each time they are activated.
Pairing Process:
- Open the lid of the charging case and remove the earbuds. The earbuds will power on automatically and enter pairing mode, indicated by blue and white indicator lights flashing alternately.
- Enable Bluetooth on your smartphone and search for "NOBLE FoKus H-ANC" in the available Bluetooth devices.
- Select "NOBLE FoKus H-ANC" to initiate pairing. You will hear the voice prompt "PAIRING COMPLETE", and the earphones will be ready to use.
Reset
If pairing does not work properly or the operation is unstable, please try resetting the earbuds.
Reset Procedure:
- Ensure the earbuds are in the charging case with the lid open.
- Press and hold the reset button on the charging case for 10 seconds. The charging case's white indicator LEDs (LED1 and LED3) will flash to confirm the reset.
Charging Case Battery Check: Press the button on the case once to display the remaining battery life.
Pairing and Reset Table:
| Action | Description |
|---|---|
| Pairing (Long press for 3 sec.) | Pair both earphones with the device while they are in the case and the case lid is open. Case LED3 flashes for 5 seconds. |
| Full Reset (Long press for 10 sec.) | Press and hold for 10 seconds until case LED1 and LED3 flash 5 seconds synchronously to reset the settings. |
Hear-through & ANC Functionality
The Hear-through and Active Noise Cancellation (ANC) functions can be controlled while the earbuds are in standby mode or playing music.
Function Control (Left Earbud Touch Sensor):
- Hear-through function: Long press the left earbud touch sensor for 3 seconds. You will hear the voice prompt "AMBIENT MODE". This activates the external sound capturing function.
- Wind noise reduction: Long press the left earbud touch sensor for 3 seconds. You will hear the voice prompt "Wind noise reduction". This activates noise cancellation for windy environments.
- Active noise cancellation (ANC): Long press the left earbud touch sensor for 3 seconds. You will hear the voice prompt "ANC ON". This activates active noise cancellation.
The cycle for these functions is "AMBIENT MODE" → "Wind noise reduction" → "ANC ON" → "ANC OFF" by repeatedly long-pressing the left earbud touch sensor for 3 seconds.
For detailed information on using the touch sensor and reading the LED display, please refer to the online manual on the web page.
Product Components and Accessories
The product includes:
- Earbuds (Left and Right)
- Charging Case
- Charging Cable
- Ear Tips (Sizes S, M, L)
- User Manual/Documentation
- Carrying Pouch
The diagram illustrates the earbuds, charging case with its LED light, reset button, and charging port. It also shows the accessories provided, including different sizes of ear tips, a charging cable, and a pouch.
Additional Information
For app downloads and further product details, scan the QR codes provided for Google Play and the App Store, or visit the Noble website.
