Instruction Manual for Add On ACCESSORIES models including: GL1800 2018, GL1800 2018 Mirror Lights with DRL and Sequential Turn Signals, Mirror Lights with DRL and Sequential Turn Signals, Lights with DRL and Sequential Turn Signals, DRL and Sequential Turn Signals, Sequential Turn Signals, Turn Signals, Signals
LED Mirror Light w/DRL & Sequential Turn Signals
MOUNTING INSTRUCTIONS FOR Part 45-1245 GL1800 2018+ Mirror Lights w/DRL & Sequential Turn Signal Read instructions thoroughly before installing. There are several YouTube video's of this procedure. Note: Recommended that these lights be installed by a qualified mechanic to prevent damage to the lights and motorcycle. 1. Remove 5mm allen screw and arm panel shown in figure 1. 2. Remove mirror assembly by removing the two support bolts as shown in figure 2. 3. Disconnect electrical connection. 4. Remove rearview mirror glass by pulling out on bottom of the mirror glass to release lower tabs. After lower tabs have been released, push up on the bottom of the mirror glass to release upper tabs. Figure 3. 5. Remove two 4mm tapping screws and trim clip, remove mirror panel. Remove three 5mm tapping screws to release turn signal assembly and mirror cover. Remove OEM turn signal assembly. Figure 3. 6. Install in reverse order with new turn signal assembly, replacing OEM part. [21 Figure 1 Figure 2 Figure 3 MIRROR COVER M"SOe e,,o,e; ~ ,, REARVIEW MIRROR ...__ MIRROR COVER ,URN SIGNAL LIGHT REARVIEW MIRROR MIRRORPANEL MIRRORBRACKET 133 Gold St, Worcester, MA 01608 508-791-7552 800-821-9861 fax 508-793-2919 email: info@addonaccessories.netAcrobat Pro 23 Paper Capture Plug-in