RGBlink
RGBlink
NDI - Removing the limits of video connectivity.
User Guide for RGBlink models including: TAO-1MINI 4K Streaming Node, TAO-1MINI, 4K Streaming Node, Streaming Node, Node
RGBLink TAO 1mini-N 4K NDI Streaming Device | Full Compass Systems
File Info : application/pdf, 21 Pages, 1.59MB
DocumentDocumentTAO 1mini 4K Streaming Node Quick Start Content Product Overview .......................................................................................................................... 2 Key Features ............................................................................................................................ 2 Front Panel ...............................................................................................................................3 Interface Panel ........................................................................................................................ 4 Dimension ................................................................................................................................1 Main Interface .........................................................................................................................2 Getting Started ............................................................................................................................... 3 Connect Input Signal ............................................................................................................ 3 Plug in Power .......................................................................................................................... 3 Connect Network ...................................................................................................................4 NDI Encoding & Decoding ......................................................................................................... 5 NDI Encoding ..........................................................................................................................5 NDI Decoding ......................................................................................................................... 6 RTMP Push .......................................................................................................................................8 YouTube Stream ..............................................................................................................................9 Operate RTMP Push via USB disk ..................................................................................... 9 Operate RTMP Push via TAO APP ..................................................................................... 9 On Air ...................................................................................................................................... 12 RTMP Pull ....................................................................................................................................... 14 Recording ....................................................................................................................................... 15 Contact us ...................................................................................................................................... 16 www.rgblink.com 1 Product Overview Key Features Small and compact, easy to carry Serve as either NDI video encoder or NDI decoder Support multiple formats, including RTMP/RTMPS/RTSP/SRT/FULL NDI/NDI | HX3/NDI | HX2/ NDI | HX Stream to at least 4 platforms at the same time Low latency of end-to-end transmission Intuitive touch control, higher color and image quality Power from USB-C or PoE network Dual ¼in mounts www.rgblink.com 2 Front Panel Touch Screen 2.1-inch touch screen for real-time monitoring of signals and menu operations. Tally Lamp Work indicators show device status. ¼in Mounts For mounting. www.rgblink.com 3 Interface Panel USB-C HDMI Connect to the power supply, support PD protocol. Connect to external monitor for real-time monitoring of inputs and outputs. For receiving video signal from your phone or others. Connect USB-C to USB camera for UVC capture. Support 5V/1A reverse power supply. HDMI For receiving video signal. 3.5mm Audio Socket For analog audio input and audio output monitoring. USB3.0 Connect to hard disk for recording, and storage up to 2T. LAN Gigabit network port with PoE. www.rgblink.com 4 Dimension Following is the dimension of TAO 1mini for your reference: 91mm(diameter)x40.8mm(height). Bottom View Right View Front View Rear View www.rgblink.com 1 Main Interface Output Three functionsRTMP PushNDI Encoding and Video Recording. Area Tap icon to trigger function Tap to enter Settings Menu. Settings Eight functionsHomeInputOutputInternetBluetoothFan Speed Brightness and About. Five functionsHDMI & UVC input Signal SelectionUSB PlayerRTMP Input Area Pull and NDI Decoding. Tap yellow arrows to choose functionTap icon to trigger function. ON AIR Tap icon to start streaming; long-press to enter configuration interface. www.rgblink.com 2 Getting Started Connect Input Signal Connecting Signal Source Connect the HDMI/UVC signal source to the HDMI/UVC input port of TAO 1mini through a cable. And connect the HDMI output port to the display via an HDMI cable. Plug in Power Connecting Power Supply Connect your TAO 1mini with the packaged USB-C power link cable and standard power adapter. TAO 1mini also supports power from PoE network. Powering TAO 1mini Connect the power and video input source correctly, power on the device, and the 2.1 inch screen will show TAO 1mini logo and then come into the main menu. Warning 1. Choose functions through tapping and set parameters through long-pressing. 2. In Settings, tap Arrow Icon to choose different functions. 3. NDI encoding mode and decoding mode cannot work simultaneously. www.rgblink.com 3 Connect Network Connecting Network Connect one end of the network cable to LAN port of TAO 1mini and the other to the switch. You can also connect directly to the network port of your computer. Dynamic IP Setting Network Configuration TAO 1mini and your computer configuration must be in the same LAN. There are two ways to configure a network. Step 1: Ensure the switch has access to the network. Step 2: Connect TAO 1mini and the computer to the same switch and in the same LAN. Step 3: Turn on DHCP of TAO 1mini, no configuration is needed for your computer. www.rgblink.com Static IP Setting Step 1: Click Network icon in Settings for TAO 1mini network configuration. Turn off DHCP and manually configure IP address, net mask and gateway. The default IP address is 192.168.5.100. Step 2: Turn off the computer's network and then configure TAO 1mini and computer to the same LAN. Please set the IP address of the computer network port to 192.168.5.*. Step 3: Please click the buttons on the computer as follows: "Network and Internet Settings" > "Network and Sharing Center" > "Ethernet" > "Internet Protocol Version 4" > "Use the IP address below", then manually enter the IP address with 192.168.5.*. 4 NDI Encoding & Decoding NDI Encoding Application Diagram Refer to the diagram for application of NDI encoding. Selecting Input Signal Tap yellow arrows to select HDMI or UVC as input signal according to actual input, and make sure the input image can be displayed successfully on the screen of TAO 1mini. Configuring Parameters Tap NDI Encoding icon in Output Area to turn on NDI Encoding and long press the icon to choose encoding format (NDI|HX by default), set resolution, bitrate and check channel name. www.rgblink.com 5 Download NDI Tools Download: https://www.newtek.com/ndi/tools/# Open NewTek Studio Monitor software and then click the icon in the upper left corner to display the list of device names discovered. Select device to connect, and pull the current video stream of TAO 1mini. After successful pull of video stream, you can click blank area of device interface to check NDI resolutions. NDI Decoding Application Diagram Refer to the following diagram for application of NDI decoding. Selecting NDI Sources Configure network of other device (Support NDI decoding) and TAO 1mini to the same LAN. Tap yellow arrows to select NDI Decoding icon. Long press the icon to enter the NDI decoding interface. www.rgblink.com 6 Click Search to find the NDI sources in the same LAN. Find the NDI source to be decoded by swiping the screen and then click to decode and output. Warning NDI encoding mode and decoding mode cannot work simultaneously. www.rgblink.com 7 RTMP Push RTMP Push Tap RTMP Push icon in Output Area. The interface will display the RTSP/RTMP/SRT stream address of TAO 1mini. Check RTSP/RTMP/SRT stream address by clicking . Users can modify IP address of TAO 1mini in Network Settings and then the RTMP/RTSP/SRT stream address will be modified synchronously. Configuring Parameters Click Edit Icon at the bottom to set the Resolution, Bitrate and Display Mode. www.rgblink.com 8 YouTube Stream Operate RTMP Push via USB disk Operating RTMP Push via USB disk Step 1: Make sure the device is connected and the network is set up. Step 2: Open YouTube Studio on your computer to Copy Stream URL and Stream Key. Step 3: Create a new TXT file first, and paste the Streaming URL and Streaming Key (the format must be: rtmp//:YOUR STREAM URL/YOUR STREAM KEY), and save the TXT file to USB as rtmp.ini.( Newline is required to add multiple streaming addresses ) and connect the USB disk to TAO 1mini's USB port. Operate RTMP Push via TAO APP Copying Stream Address & Key Create QR code: https://live.tao1.info/stream_code/index.html Copy stream address and stream key to the above address to create the QR code. The created QR code will be displayed in the right. www.rgblink.com 9 Downloading TAO APP Use your mobile phone to scan the QR code to download TAO APP. Turning on Bluetooth Click Bluetooth icon in Settings. Sending RTMP Stream Address Click TAO APP Icon to enter the homepage. Click Scan Icon in the homepage and then click Send RTMP to Device. Choose to turn on or off Bluetooth by swiping the screen left and right. www.rgblink.com 10 Pairing TAO 1mini with TAO APP Turn on Bluetooth of TAO APP. Then TAO 1mini will be recognized. Click connect to pair TAO 1mini with TAO APP. Scanning the QR Code After successful paring, click Device Name > Scan Icon > Scan QR code. Sending RTMP Stream Address The RTMP address will be shown in the box, then click Send RTMP. Receiving RTMP Stream Address TAO 1mini will pop up a message, click YES to receive. www.rgblink.com 11 On Air Selecting the Platform Choose the platform you need. The saved platforms are displayed at the top of the interface, and the newly added platforms are displayed at the bottom. The green circle indicates the platform been chosen. Long press the icon to check stream address and click Edit in the middle for deletion of platform. Configuring Parameters Users can also set Resolution, Bitrate and Display Mode by clicking shown as below. www.rgblink.com 12 ON AIR Finally, click ON AIR in the main interface to stream. ( Support up to 4 live streaming platforms at the same time) Checking Status Click the blank area of the home page. The left area is the Status Display Area, which displays the status of the TAO 1mini. No network input No U disk Bluetooth not connected With network input U disk inserted Bluetooth connected Warning --Streaming, --Available but Failed in Streaming. www.rgblink.com 13 RTMP Pull RTMP Pull Tap yellow arrows to select RTMP Pull icon. Long press the icon to enter the following interface. Downloading TAO APP Click the icon for TAO APP installation. Turn on Bluetooth in Settings to pair TAO 1mini with your mobile phone so as to import RTMP stream address via TAO APP. www.rgblink.com 14 Recording Inserting a U Disk Insert a U disk to TAO 1mini USB port and TAO 1mini can work as a recorder. The storage of U disk is up to 2T. Configuring Parameters Press and hold USB Recording icon to enter parameter configuration interface. Users can set resolution, bitrate and check disk info in Settings. Warning During video synchronization, do not unplug the USB flash disk. www.rgblink.com 15 Contact us Warranty All products are designed and tested to the highest quality standard and backed by 1 year parts and labor warranty. Warranties are effective upon delivery date to customer and are non-transferable. RGBlink warranties are only valid to the original purchase/owner. Warranty related repairs include parts and labor, but do not include faults resulting from user negligence, special modification, lighting strikes, abuse(drop/crush), and/or other unusual damages. The customer shall pay shipping charges when unit is returned for repair. Headquarter: Room 601A, No. 37-3 Banshang community, Building 3, Xinke Plaza, Torch Hi-Tech Industrial Development Zone, Xiamen, China Tel: +86-592-5771197 Fax: +86-592-5788216 Customer Hotline: 4008-592-315 Web: http://www.rgblink.com E-mail: support@rgblink.com www.rgblink.com 16