ILVE IVDSI458 45cm Semi-Integrated Dishwasher

Product Overview

The "ecosystem" range of dishwashers includes the IVDSI458 45cm-wide built-in dishwasher, perfect for apartments or where space is a premium. Made of sleek stainless steel and using ILVE's state-of-the-art technology, this dishwasher is easily integrated into a smaller kitchen.

Key Specifications and Features

• Size: 445W x 540D x 750H + 820H (1145 fully open) mm
• Finish: Stainless steel interior and control panel, door panel supplied and fitted by builder
• Capacity: 8 place settings
• Features:
  • 6 wash programs
  • ECO wash program
  • 45 dBA low noise operation
  • Delay start (3-6-9 hours)
  • Half wash option
  • Residual heat drying
  • Cold water connection
• Power: 10 amp, 3-pin plug

Energy and Water Efficiency:

• Energy Rating: 244
• Water Rating: 12.2
• For more information, visit www.waterrating.gov.au

Warranty: 2 Years Parts & Labour Warranty from ILVE.

Wash Programs

* AS/NZS 2007.1: Test cycle program | ✓ Rinse Aid required

NB: ILVE recommends opening the door 50mm at the end of the wash to assist drying.

Loading Instructions

Upper Basket

The upper basket is designed to hold more delicate and lighter dishware such as glasses, coffee and tea cups and saucers, as well as small plates and bowls and shallow pans (provided they are not too soiled).

Lower Basket

It is suggested that large items, and items that are most difficult to clean, e.g., pots, pans, lids, serving dishes etc., are placed in the lower basket. It is preferable to place serving dishes and lids on the side of the racks to avoid blocking rotation of the top spray arm.

Installation Dimensions

The overall dimensions of the dishwasher are 445mm width x 540mm depth. The height is 750mm, extending to 820mm when fully open. The panel length should be within the range of 506mm to 580mm, with a maximum of 580mm. The dishwasher requires a space of 445mm width, 540mm depth, and a height of 750mm to 820mm. The front panel attachment points are at 1145mm from the bottom. The rear connections are approximately 418mm from the front. The panel attachment points are 10-17mm from the top edge and 5-12mm from the side edge. The base of the unit is 38mm high, with a 30mm gap for toe kick. The total height from the floor to the top of the unit is 580mm max. The internal width for the panel is 442mm, with attachment points at 179mm and 175mm from the sides respectively, and 46.5mm and 323mm from the top.

NB: Drawings are not to scale – they are to be used as a guide only.

Disclaimer

Eurolinx Pty Ltd, trading as ILVE Appliances, is continually seeking ways to improve the design specifications, aesthetics, and production techniques of its products. As a result, alterations to products and designs take place continually. Whilst every effort is made to produce information and literature that is up to date, this brochure should not be regarded as an infallible guide to the current specifications, nor does it constitute an offer for the sale of any particular product. Product dimensions indicated in literature are indicative only. Actual product only should be used to define dimension cutouts. Distributors and retailers are not agents of ILVE Appliances and are not authorized to bind ILVE Appliances by any express or implied undertaking or representation.