Forever Call Me! 2 Smartwatch KW-60
Thank you for purchasing a product by Forever. Before use, please refer to the User's manual, and save it for future reference. Do not disassemble the device on your own – all repairs should be done by a service technician. Use only original parts and accessories provided by the manufacturer. We hope that the product by Forever fulfills your expectations.
IMPORTANT! The device requires installation of a microSIM card with an active call making/answering service, with no PIN lock. It is recommended to deactivate voicemail. When sending information regarding location, the watch will require access to mobile Internet, therefore, you should buy at least 1 GB package. Use of the watch may be associated with fees for using the network and calls, in accordance with the operator's tariff.
Description
- Camera
- Answering calls
- Mic
- Torchlight
- On/Off/SOS button
- Touch button
- MicroUSB charging port
SIM card installation
Before inserting or removing the SIM card, always ensure that the watch is turned off. Never insert or remove SIM card when the watch is turned on. Open the back flap of the watch by carefully levering its upper part and sides until the latches are disengaged. Then, remove the battery, paying attention not to damage the battery cables. Remember its positioning. Open the protection of the microSIM card by carefully moving it to the right, and then insert the SIM card into the slot, so that the chip of the SIM card is facing up towards the screen of the watch. Then, close the protection by moving it to the left. Place the battery in the watch in its original position, and then close the back flap by engaging the latches.
Charging
Open the plug protecting the micro USB port, and then connect the micro USB cable included in set. Next, plug the cable in the power source. The charging animation will be displayed on the screen.
Forever KidsCare / Forever Care application installation
Download the “Forever Care” application for iOS or “Forever KidsCare” for Android and install it on your phone.
Account and watch registration in the application
In the registration window, enter or scan the watch code (REG CODE) located on the package bottom and by the watch. Enter your e-mail address, name and password. Then, select the language of the application and the area in which the watch will be used.
Download full Instruction manual
www.manual.forever.eu/KW60