Boult Audio Q Wireless Headphones
User Manual
Know Your Headphones
The Boult Audio Q headphones feature several controls and ports:
- EQ / Gaming mode button: For switching audio profiles or enabling/disabling game mode.
- Microphone: Integrated for calls and voice commands.
- USB Type-C charging port: For charging the headphones.
- 3.5mm audio port: For wired listening.
- LED Indicator: Displays charging status and Bluetooth connectivity.
- Multifunction button (MFB): Used for power, play/pause, answering/ending calls.
- Volume down/previous song button: Controls volume and track skipping.
- Volume up/next song button: Controls volume and track skipping.
What's in the Box?
- Headphones
- Type-C Charging Cable
- 3.5mm Audio Cable
- Manual
- Warranty Card
Product Specification
- Bluetooth Name: Boult Audio Q
- Bluetooth Range: ~10m/33ft (without any obstacles)
- Headphones Charging Time: 120 mins
- Frequency Range: 20Hz – 20KHz
- Technology: HFP/HSP/A2DP/AVRCP
- Input: DC5V = 1A
- Connector: 3.5mm
Operating Instructions
Power ON/OFF
- Power ON: Long press the Multifunction (MFB) button for 2 seconds. The LED indicator will turn blue, and the headphones will enter Bluetooth pairing mode.
- Power OFF: A long press of the Multifunction (MFB) button for 5 seconds will turn the LED indicator red and then turn OFF.
Pairing
- When the headphone is turned on, it automatically enters Bluetooth pairing mode, indicated by RED and BLUE lights flashing alternately.
- Activate Bluetooth on your device, search for the pairing name "Boult Audio Q", and click to connect. On successful connection, the blue light turns ON.
3.5mm AUX Mode
- Plug the 3.5mm audio cable into the aux port to listen in wired mode.
- Please note that the headphones' buttons and microphone cannot be used once the cable is connected.
Charge
- Connect one end of the charging cable to the headphone's Type-C interface and the other end to any USB charger or charging device.
- While charging, the LED stays red. Once the headphones are fully charged, the LED turns blue.
- Note: Headphones must not be powered on or used while charging. When the battery is low, it is indicated by red LED flashes.
How to Use Your Headphones
- Play/Pause: Press the MFB once.
- Volume Up: Press the "+" button.
- Next Track: Long press the "+" button for 1 sec.
- Volume Down: Press the "-" button.
- Previous Track: Long press the "-" button for 1 sec.
- Answer the Call: Press the MFB once.
- Reject Call: Long press the MFB for 2 sec.
- End Call: Press the MFB once.
EQ Mode / Game Mode
- EQ Mode: Press the EQ mode key to choose between Pop, Bass, Rock, and Vocal modes.
- Game Mode: Long press the EQ button to enable/disable gaming mode.
Reset
- Press and hold the "+" and "-" buttons simultaneously for 5 seconds. This will separate the Bluetooth connection and restore factory settings.
Maintenance Instructions
Warranty Information
Warranty is valid/invalid based on the following criteria:
- The product must be purchased through legal and formal channels to be applicable for warranty.
- Damage to the product intentionally/unintentionally, or due to natural disasters, etc., is not covered in the warranty.
Product Care and Safety
- Do not dismantle the product in any way, as this can result in a fire or electrical breakdown, causing the product to be completely damaged. This is extremely dangerous.
- Any maintenance or servicing of the headphones must be performed only by a qualified service provider/manufacturer.
- Please do not remove the battery yourself. This task should be handled by a service provider/manufacturer. Replacing the current battery with an ill-fitting set can cause a fire or electric hazard and is strongly discouraged.
