Owner's Manual for KENYON models including: 145416, Texan Built-In Electric Grill with Intelliken Touch 240v, 145416 Texan Built-In Electric Grill with Intelliken Touch 240v
Contents. IMPORTANT SAFETY INSTRUCTIONS. Product Specifications. Before Using the Grill Quick Start Tips Stuffed French Toast. Operation Indicator Lights Turning On Safety Lock Feature Cooking...
Part # 145416 Created: May 19, 2017 Revised: July 19, 2021 www.CookWithKenyon.com TEXAN WITH INTELLIKEN TOUCH™ - 240V OWNERS MANUAL
File Info : application/pdf, 20 Pages, 2.94MB
DocumentDocumentwww.CookWithKenyon.com TEXAN WITH INTELLIKEN TOUCHTM - 240V OWNERS MANUAL Part # 145416 Created: May 19, 2017 Revised: July 19, 2021 Contents IMPORTANT SAFETY INSTRUCTIONS Product Specifications Before Using the Grill Quick Start Tips Stuffed French Toast Operation Indicator Lights Turning On Safety Lock Feature Cooking Mode Options Heat Level Cooking Mode Temperature Cooking Mode Changing Temperature Units Timer Options Automatic Shut-Off Time Temperature Guide Error Code Readout Grill Parts Lid Removal Handle Lock Installation Unpacking the Grill Check Electrical Supply Requirements Countertop Preparation Drain Connection Final Preparations Prior to Use Warranty 3 Please read & save 5 these instructions 6 Thank you for choosing Kenyon, 7 the world's leading manufacturer of specialty cooking appliances. By following the instructions in 9 this owners manual, your grill will 9 provide you with many years of 9 reliable service. 9 10 To ensure our ability to continue serving you, please use this page 10 to record important product 10 information. 11 12 For quick reference 12 13 please keep a 14 record here: 15 15 Purchase date 16 16 17 19 Model number 19 20 Serial number Name plate location NAME PLATE LABEL LOCATION IMPORTANT SAFETY INSTRUCTIONS Read this section BEFORE operating the grill. The following information applies to all KENYON Grills. THIS GRILL, LIKE ALL APPLIANCES, HAS THE POTENTIAL TO CREATE SAFETY PROBLEMS THROUGH CARELESS AND IMPROPER USE. PLEASE OBSERVE ALL OF THE FOLLOWING SAFETY PRECAUTIONS. Read ALL instructions prior to using product. CAUTION Do not touch hot surfaces. Use handles or knobs. To protect against electrical shock, do not immerse cord or plugs in water or other liquid. Allow to cool before putting on or taking off parts. Warning: If the surface is cracked, switch off the appliance to avoid the possibility of electric shock, for hob surfaces of glass-ceramic or similar material which protect live parts. Do not operate appliance with a damaged power cord or plug. If the appliance malfunctions, discontinue use. Contact KENYON Customer Care immediately at (860) 664-4906. The use of accessory attachments not supplied by the manufacturer of the appliance may cause injuries. Do not let cord hang over edge of table or counter, or touch hot surfaces. Always place a minimum of two (2) cups of water in disposable drip tray prior to grilling. Never leave children alone - children should not be left unattended around the grill at any time. Close supervision is necessary when any appliances are used near children. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children without supervision. Allow the grill to cool before taking off cooking grates, disposable drip trays or lids. Fuel, such as charcoal briquettes, are not to be used with this appliance. 3 IMPORTANT SAFETY INSTRUCTIONS Do not place on or near a hot gas or electric burner, or in a heated oven. Extreme caution must be used when moving an appliance containing hot oil or other hot liquids. Ensure grill is installed per instructions and properly grounded by a qualified electrician. Do not use water to extinguish a grease fire, use dry chemical fire extinguisher. Do not use appliance for other than intended use. Do not replace or attempt to repair any part of the grill, unless otherwise noted in this manual. All other service is to be performed by a factory authorized technician. Do not store flammable materials near the grill. Do not wear loose fitting or hanging apparel when using the grill. DO NOT DISCARD THESE INSTRUCTIONS, KEEP THEM WITH THE KENYON GRILL FOR FUTURE REFERENCE. WARNING! Charcoal or similar combustible fuels must not be used with this appliance. REMOVE & READ PRIOR TO GRILLING QUICK START TIPS IntelliKEN TouchTM Thank you for purchasing the World's Finest All Seasons® Electric Grill! Here are a few simple steps you can take to ensure your good decision will lead to years of World-Class Grilling: 1. Remove grate(s) and drip tray(s), clean both. 2. Insert the drip tray(s) into the bottom of grill. Make sure the burner brackets are not resting on the drip tray(s). 3. Always fill the drip tray(s) with 2 cups of liquid. Water will work, but why not try beer or wine to add flavor to your favorite food. Then re-install cooking grate. VISIT OUR WEBSITE to purchase recipe books, cooking utensils, griddles, grill covers, and more! 4. You have the choice of temperature or power setting. Adjust control setting for type of food, for example: Vegetables - Temp setting 350°F / Power setting 4 Chicken, pork and fish - Temp setting 400°F / Power setting 5 Hamburgers - Temp setting 500°F / Power setting 9 Steak - Temp setting 550°F / Power setting 16 Preheat grill with the lid closed for 5 - 7 minutes. Enjoy the best grilled food you have ever tasted! 5. Once cool, place grate/griddle in the dishwasher along with the dirty dishes so that it's ready for its next tour of duty! 6. While the grate is in the wash, don't forget to clean out the drip tray contents. This is an important step in preventing a grease fire. www.CookWithKenyon.com | 860.664.4906 | THE ABOVE INSERT IS LOCATED UNDERNEATH YOUR GRILL LID. PLEASE READ INSERT AND REMOVE PRIOR TO GRILL USE. 4 Product Specifications Texan Grill with IntelliKEN TouchTM - Model B70425 (240V) - Model B70425NH (240V) - Model B70425AU (240V) - Model B70426AU (240V) - Model B70427AU (240V) VOLTAGE 240V AC BURNER DATA AMPS 13 OUTPUT IN WATTS 3000 WIDTH 29 1/2" 753mm PRODUCT DIMENSIONS DEPTH 21" 533mm HEIGHT 5 1/2" (12 1/2" with lid) 139.7mm (317.5mm with lid) WIDTH 28" 711mm CUTOUT DIMENSIONS DEPTH 18 1/2" 470mm RADIUS 1/4" 6mm 7.25in [184mm] A 20.10in [511mm] 3.90in [99mm] 5.43in [138mm] 8 W7 ITH DRAIN FITTING 6 5 B 25.67in [652mm] 21.00in C 533mm F 29.50in E D 753mm 18.50in 470mm D A) Height of lid fully open - 20.1" (511mm) B) Depth of grill with lid open - 25.67" (652mm) C) Depth of grill on counter - 21" (533mm) D) Width of grill on counter - 29.5" C(753mm) 4.88in 124mm 5.69in 144mm Overall & Cutout Dimensions B 5 4 3 2 28.00in 711mm UNLESS OTHERWISE SPECIFIED: NAME Before Using the Grill 1 Remove the cooking grates and drip trays from the grill. Wash the grill with warm soapy water using a non-abrasive cloth. USE ONLY HIGH TEMP PLASTIC UTENSILS WHEN GRILLING. Visit our web site to purchase a set of high quality stainless steel/high temp plastic grill utensils, www.cookwithkenyon.com. 2 Make sure the drip trays are inserted all the way into the bottom of grill and electric element brackets are resting on the element support bracket. 3 Cover the bottom of the drip trays with a liquid. Water is fine. PLEASE DO NOT USE A FLAMMABLE LIQUID! Doing so would ruin your cookout. Using apple juice if you are grilling pork adds a nice flavor to the meat. A can of lime soda is wonderful if you are grilling fish. Just remember always add liquid to the drip trays prior to grilling. 4 To keep your grill smoke free, always clean the grilling surfaces after each use. Simply wash with warm soapy water using a non-abrasive cloth or place in your dishwasher. Empty the drip trays and wipe with a damp paper towel. 5 Place your cooking grates or optional griddles (part #B96000) onto the element with drip trays installed. Use the griddles for foods such as eggs, pancakes or my favorite stuffed french toast! 6 Preheat grill with the lid closed for 5 - 7 minutes on desired heat setting for type of food: · Steak - Temp setting 550°F/ Power setting 16 · Burgers - Temp setting 500°F/ Power setting 9 · Pork and Fish - Temp setting 400°F/ Power setting 5 · Vegetables - Temp setting 350°F/ Power setting 4 7 Close the lid(s) and cook. Enjoy the best grilled food you have ever tasted! 8 Clean up. After the grill has cooled to the touch, take a few pieces of paper towel and place on the grilling surface. Pour about one ounce of water on the towel and then using your high temperature nylon tongs, swab the paper toweling back and forth to loosen up the residue from your grilling. Throw the paper towel away and wipe the grates off with a dry paper towel. 9 Once the grates have cooled sufficiently, remove the grates and place in your dishwasher for a thorough cleaning. 10 With the grates removed, lift up the electric elements and remove the drip trays. Empty the contents of the drip trays in an appropriate place. Wipe the trays out with a dry paper towel and reuse the trays. 11 After you have used your grill many times, you may want to wash the lids. They can be placed in your dishwasher and run on the pots & pans cycle. This will restore your grill to its original pristine look. 12 To clean the grill, first be sure the cooking surface has cooled enough to handle. Then remove the grates, lift up the electric elements until they lock in the up position, remove the middle grate support cross bar, then the drip trays. The grate support cross bar is removed by lifting the rear and pulling the front notch off of the supporting tab. To install the support reverse the procedure. Do not cook on the grill without the support cross bar in place! 6 13 Wipe the stainless steel surfaces with a damp cloth to remove any residue from previous grilling sessions. 14 Your Kenyon grill came with a sample bottle of stainless steel cleaner. Use this cleaner once a month to keep your grill looking like new. Before Using the Grill 15 The touch control area is ceramic glass which is sealed from the effects of rain, snow and ice. To clean the glass, use a glass cleaner and soft towel. If stains appear, use a ceramic glass cleaner which can be found in your local grocery store. Stuffed French Toast 16 slices Thin Sliced Bread 1 lb. Cream Cheese (softened) ½ cup Peach Preserves (or your favorite) 4 T. Butter French Toast Batter: 5 Large eggs thoroughly beaten 1 cup Milk 1 T. Cinnamon, ground ½ t. Allspice, ground ½ t. Coriander, ground 2 oz. Water (Dark Rum, Optional) In a large bowl place the eggs and beat with a wire whisk. Add the milk and beat again until incorporated. In a separate smaller bowl pour water or Rum (if you prefer) and add dry ingredients, mix thoroughly. Once the dry ingredients have been mixed, add to the egg and milk mixture and beat again until mixed. By doing this you avoid the clumps that come with making batter. Method of Preparation: This will require the use of your griddle. Preheat your `All Seasons Grill' on medium high heat (6 bars) for approximately ten minutes. Once the cream cheese has softened mix with the peach preserves. Divide equally onto eight slices of bread and spread evenly. Place the remaining eight slices on top to make a sandwich. When your griddle has been preheated, add two tablespoons of butter and move around to coat the griddle. Reserve the rest of the butter for the remaining pieces of French Toast. Take the sandwich and dip into the mixture and flip it over to coat both sides of your bread. Quickly do this to three more "sandwiches". You will now have four pieces of stuffed French Toast on your griddle. Be careful not to burn. Flip the sandwiches over and continue cooking until both sides are browned nicely. At this point you either serve with some nicely warmed maple syrup and butter, or you can keep warm in a low oven until you finish the remaining pieces of French Toast. 7 Operation DO NOT USE WATER ON GREASE FIRES Smother fire or flame or use dry chemical or foam-type extinguisher. USE ONLY DRY POT HOLDERS Moist or damp pot holders on hot surfaces may result in burns from steam. Do not let pot holder touch the grate or element of the grill. Do not use a towel or other bulky cloth in place of a pot holder. DO NOT COOK ON BROKEN GRILL GRATE OR GRIDDLE If the grate should break, grease and oils may come into direct contact with the electric element and create a risk of electric shock or fire. Contact an authorized service center or KENYON Customer Care immediately at (860) 664-4906. CLEAN GRILL WITH CAUTION If a wet sponge or cloth is used to wipe spills on a hot cooking surface, be careful to avoid steam burns. Some cleaners produce noxious fumes if applied to a hot surface. Read the cleaner label for details prior to using. DO NOT TOUCH HEATING ELEMENT OR GRATE The heating element and grate will be hot for some time after cooking. These components should be allowed to cool and then be handled with care and caution while cleaning, as they may be hot enough to cause severe burns. Do not operate appliance with a damaged power cord or plug. If the appliance malfunctions, discontinue use and contact the nearest authorized appliance dealer or the factory examination, repair or adjustment. CLEAN GRILL AFTER EACH USE This appliance is equipped with removable, disposable drip trays. The drip trays MUST be removed and cleaned after each and EVERY use. Do not allow grease to accumulate between cooking. The drip trays and baffle tray MUST be used when cooking on the grill. Excessive grease may spill over into the interior of the grill, voiding your warranty and posing a fire hazard. NEVER LEAVE GRILL UNATTENDED AT HIGH HEAT SETTINGS High heat setting may cause heavy smoking and ignite grease. DO NOT CLEAN UNIT WITH PRESSURIZED WATER Never clean the grill with any form of pressurized water or other types of cleaners. Doing so will void the warranty and may pose a serious risk of electric shock. Always clean the grill with a cloth and a stainless steel or glass surface cleaner. STORAGE Suitable shelter must be provided to prevent direct exposure to rain. Covers available at www.cookwithkenyon.com. TO PREVENT SMOKE To prevent the contents of the drip trays from smoking, place 2 cups of water (or enough to cover the bottom of the pan) in the drip trays before cooking. DO NOT USE POTS OR OTHER BAKEWARE ON THE GRILL KEEP THESE INSTRUCTIONS WITH THE GRILL FOR FUTURE REFERENCE 8 Indicator Lights There are a series of lights that provide indications of element operation and hot surfaces. These lights are located adjacent to the control panels. When the control is ON, a LED light array will illuminate indicating which element is on. For your safety, we have incorporated a "HOT" indicator light. When lit, this light indicates that some part of the cooking grate is too warm to touch or place articles upon. Do not place articles on the cooking surface while this light is glowing. After turning off the element, the "HOT" indicator light will remain illuminated until the cooking grate is safe to touch. Turning On Touch the controls firmly with the flat part of your fingertips. With the unit unlocked, touch the POWER button in the main control frame. Activate either element by holding the element power button in the control frame for 2 seconds and choosing a cooking option. If an element is not activated within 15 seconds, the grill will de-power by itself. Operation Safety Lock Feature When the LOCKED LED is illuminated in the main power control frame, the grill touch control power settings can't be adjusted from the current setting. Pressing either the zone power button or the master power button however, can turn off the grill. The LED arc light array will no longer illuminate when in the lock mode. The lock feature can be activated at any time as a safety measure, whether the unit power is on or off. When the unit has power the STANDBY light will illuminate. To unlock the grill, swipe the LOCK feature with your fingertip along the gradient surface, from the LOCK to the UNLOCK position as indicated by the key and open padlock graphics or touch and hold the UNLOCK graphic for 3 seconds. To LOCK the grill, swipe from the UNLOCK to the LOCK position or touch and hold the LOCK button for 3 seconds. Cooking Mode Options The grill elements can be independently operated by either a heating level ranging from low to high, or by setting a specific cooking temperature. 9 Operation Heat Level Cooking Mode With the main power on and the element powered on, swipe your finger along the temperature control arc and release at the desired setting. The settings range from LOW-MED-HIGH in 16 increments, as indicated by the LED light array that illuminates along the control sweep. Also, the arc + and signs can be toggled to select the desired heat level. The LED light array will indicate the selected setting. The default heat level upon starting any element is 0. If the element is set or remains at 0 for 15 seconds of inactivity, the element will de-power. 16 LED LIGHT ARRAY ELEMENT CONTROL FRAME + BUTTON - BUTTON LED LIGHT ARRAY HEATING LEVEL CONTROL SWEEP Select the desired cooking temperature, ranging from 150° to 550°F (65° to 287°C), in 10°F (12°C) increments. The selection can be made by pressing + or buttons for each increment change, or swiping the arc. The selected cooking temperature value will illuminate and flash in the control frame while the selection is in progress. The value will flash until the temperature is reached. After the temperature has been reached the value will illuminate steady, and the cooking temperature will remain set unless it is changed. The default temperature setting is always 150°F (65°C) upon startup in temperature cooking mode. TEMP Changing Temperature Units The temperature units can be changed from Fahrenheit to Celsius by touching the °F/°C button in the main power control frame. All active elements will change accordingly. The chosen default units will remain with every use unless changed. SAFETY LOCK FEATURE TEMPERATURE UNIT SELECTOR BUTTON COOKI Temperature Cooking Mode Select the temperature cooking mode by touching the thermometer/gradient graphic within the chosen element control frame. 10 MAIN POWER CONTROL FRAME Timer Options Kitchen Timer The kitchen timer is a general timer that has many uses around the kitchen, independent of cooking activity on the grill. Activate the main power and touch the timer clock graphic within either element control frame. Set the desired time duration by touching the + and buttons, holding the button to increase or decrease the setting. A beep will sound at the start of the setting and the set time will display in the control fame. The time increments will run from 1-10 minutes in 1 minute increments, and then change to 5 minute increments. The time reading will speed up as the touch is held. Touch the timer button again to start. If no time is set, the timer will deactivate after 20 seconds. As the set time elapses, the display will show the time remaining in minutes until it reaches one minute, after which the display changes to seconds remaining to zero. The display will flash and a double beep alarm will sound every ten seconds until the power button is touched or after 3 minutes, the flashing display and alarm will deactivate. KITCHEN AND COOKING TIMER TEMPERATURE COOKING MODE BUTTON Operation Cooking Timer Each element has its own cooking timer that can be activated to shut the heating element off at the end of the set time. At any time during cooking for each element, set the desired time duration by first touching the clock graphic then touching the + and buttons, holding the button to increase or decrease the setting. A beep will sound at the start of the setting and the set time will display in the control fame. The time increments will run from 1-10 minutes in 1 minute increments, and then change to 5 minute increments. The time reading will speed up as the touch is held. Touch the timer button to start. If no time is set, the timer will deactivate after 20 seconds and normal cooking will resume. As the set time elapses, the display will show the time remaining in minutes until it reaches one minute, after which the display changes to seconds remaining to zero. The burner will automatically shut-off and stop cooking at the end of the set time. The display will flash and a single beep alarm will sound every five seconds until the power button is touched, within 30 seconds. After 30 seconds of no activity after the time has elapsed, the timer will shut off. COOKING TEMPERATURE READOUT 11 Operation Automatic Shut-Off Time The table below displays the automatic shut-off time corresponding to each heat setting. SETTING 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 AUTOMATIC SHUT-OFF (min) 90 90 90 90 70 70 70 70 70 70 60 60 60 60 60 60 Temperature Guide The following is meant to be a guideline. Individual results may vary depending on conditions. Factors such as wind, and outside temperatures, food temperature when placed on grill can affect cooking times. The grill is designed and engineered for optimal cooking performance with the lid down or closed. SETTING FOOD TYPES 1-2 3-4 5-6 7-8 9-10 11-12 13-14 15-16 Fried eggs on griddle Pancakes - French toast on griddle Vegetables Vegetables - Fish Fish - Chicken Chicken - Hamburgers Hamburgers - Steaks Steaks 12 Operation TEXAN GRILL WITH INTELLIKEN TOUCHTM MAINTENANCE The Kenyon Texan Grill with IntelliKEN TouchTM is a sealed unit that does not require regular maintenance. Please follow our operating instructions as mentioned above. If your grill requires service, this must be preformed by Authorized Personnel only. Please call Kenyon Customer Care at 860-664-4906. Error Code Readout In the event that the Texan Grill with IntelliKEN TouchTM is not operating correctly, the control readout will display an error code that will identify the problem. If an error code is shown on the display, identify the code in the Troubleshooting Index below and take action as noted. De-power and re-start the unit to clear the display. Allow the unit to cool as necessary. Lock out the main power supply to the unit by closing the breaker before performing any wiring operations. If the problem persists, please call Kenyon Customer Care at 860-664-4906, M-F, 8AM 5PM EST or email at customercare@cookwithkenyon.com. ERROR CODE E04 E06 E07 E08 E09 E10 TROUBLESHOOTING INDEX DESCRIPTION Unit operating at high temperature. Internal electronic control issue. ACTION TO REMEDY ERROR Allow unit to cool. Ensure correct cooking utensil type is used. Lower the cooking level or temperature setting. Refer to Kenyon Customer Care. More than two control functions Re-power unit and command activated at the same time for one control input at a time. three seconds, unit de-powered. 13 Operation Grill Parts Heating Elements The heating elements are designed to pivot as shown to remove/replace the baffle tray and drip trays. They will stay in the up position. To put down apply slight downward pressure. Baffle Tray The baffle tray supports the drip trays, heating elements and grates and must always be used when operating the grill. The cross bar must also be installed to support the elements and grates. Drip Trays The drip trays collect all the fat and juices created during the cooking process. The drip trays must be emptied after each use. When replacing the drip trays, position the drip trays so that they are completely contained inside the baffle tray and insuring that the side or the rim of the drip trays do not protrude outside of the baffle tray. To prevent the contents of the drip trays from smoking, place 2 cups of water (or enough to cover the bottom of the pan) in the drip trays before cooking. Grates Grates must be cleaned after every use. The grates have a nonstick coating for ease of cleaning. Wash grates after each use in warm soapy water. Drip trays must be contained inside of heat baffel as shown GRATES CROSS BAR DRIP TRAYS BAFFLE TRAY HEATING ELEMENT Element support bar must be in place as shown 14 Lid Removal The grill lids are removable for cleaning. To remove the lids, open it so the bearing is aligned with the notch in the lidstay. Pull the lidstay toward the center of the grill, over the bearing, releasing the lid from the lidstay mechanism. Then slide the quick release pin out of the middle hinge. Operation Handle Lock The handle lock allows the user to lock both lids together for ease of opening and accessing the entire grilling surface. Notch in lidstay Slide & Twist Unlock Lock Handles Locked Quick release pin With the quick release pin removed, grasp the lid, pushing back on the center to clear the middle hinge and slide the lid away from the center of the grill until the outer hinge is free of it's pivot pin. Once the lid(s) have been removed they can be washed in warm, soapy water. Installation is reverse of removal. The lids can also be unlocked and opened individually for access to either half of the grilling surface. Slide & Twist Unlock Lock Handles Unlocked This is a great feature allowing the user to access only half of the grill, allowing the other half to continue cooking uninterrupted. 15 Installation Unpacking the Grill 1 Carefully unpack the grill from its shipping container. Verify and identify the package contents. The following items should be included in the carton. If any components are missing or damaged, call KENYON immediately. Check the Electrical Supply Requirements 2 This product must be installed in accordance with national, state and local electric codes. The following table provides the correct voltage, amperage and frequency that must be supplied to the grill. The means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules. PARTS INCLUDED Texan Grill with IntelliKEN TouchTM (1) Stainless steel cleaner 3 feet of drain hose with brass fitting (9) Mounting screws ELECTRICAL SUPPLY REQUIREMENTS The supply must be from an individual grounded circuit that is protected by a circuit breaker and rated per the specifications for the model as shown in this table. KENYON PART NUMBER B70425 MAX CONNECTED LOAD 3000 Watts POWER SUPPLY INPUT 240V AC 13A 50/60Hz PLUG TYPE 3 wire cord no plug B70425NH 3000 Watts 240V AC 13A 50/60Hz 3 wire cord no plug B70425AU 3000 Watts 240V AC 13A 50/60Hz AU 3 prong grounded cord B70426AU 3000 Watts 240V AC 13A 50/60Hz AU 3 prong grounded cord B70427AU 3000 Watts 240V AC 13A 50/60Hz AU 3 prong grounded cord IMPORTANT! If the electrical supply does not meet the product specifications, consult with a licensed electrician before proceeding with installation! 16 Installation Countertop Preparation 3 Your Texan Grill with IntelliKEN TouchTM is supplied with a factory installed polished stainless steel flange that accepts nine oval head wood screws for mounting. The trim flange of the grill is designed to hold the unit firmly in place in the countertop. If desired, you may seal the edge of the countertop beneath the trim flange. We recommend a NON-ADHESIVE such as Plumbers Putty. This will help reduce the chance of damage to the trim flange should the unit need to be removed from the countertop. Should you need to remove the unit from the countertop after installation simply take a piece of fishing line and run back and forth under the trim flange to break the caulk bond. WARNING! Allow a 2 inch (2") minimum clearance between the bottom of the grill and combustible surface located below, ie: the upper edge of a drawer installed below the grill (see page 18). Failure to provide proper clearances and ventilation may result in a fire hazard. D - 30 inches minimum clearance between the top of the cooking surface and the bottom of an unprotected wood or metal cabinet or 24 inch minimum clearance when the bottom of the wood or metal cabinet is protected by not less than 1/4-inch-thick flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015-inch-think stainless steel, 0.024-inch-thick aluminum or 0.020-inch-thickcopper. E - 6-inch minimum from backsplash of countertop to edge of grill(refer to page 5 for overall grill dimensions). 1-1/2 inches minimum from front of counter to grill. PLEASE READ THIS SECTION PRIOR TO MAKING CUTOUT FOR THE GRILL. It is important to plan ahead for installation of the grill, keeping the following dimensions in mind. A - 13 inches maximum depth of overhead cabinets B - 36 inches is minimum height of countertop above floor C - The minimum flat countertop surface that the grill will rest upon must be equal to or greater than the overall grill dimensions (refer to page 5 for overall grill dimensions). FOR INSTALLATIONS IN CANADA: "Do Not Install Closer Than 1/2 Inch (12mm) From Any Adjacent Surface", and NE PAS INSTALLER A'MDINS DE 12MM DETOUTE SURFACE ADJACENTE. 17 Installation WARNING! To eliminate the risk of burns by reaching over heated surface units, cabinet storage space located above surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a range hood that projects horizontally a minimum of 5" beyond the bottom of the cabinets. Before making the countertop cutout, check for clearance. Check to see if the grill will clear the front and side walls of the base cabinet. It is also important to provide enough ventilation. Adequate ventilation of the space below the countertop must be provided to ensure proper operation of the grill. Heat transferred from the grill bottom pan during operation will overheat an improperly ventilated area. When making countertop cutout, radius the corner to help prevent cracking of the countertop material. A 1/4 inch radius is typical, but follow the countertop manufacturer's instructions regarding the minimum radius and any reinforcements required to prevent damage to the countertop over time. Use Plumber's Putty to seal grill to countertop. Plumber's Putty is a soft, pliable sealing compound that is used to make watertight seals around faucets, drains, and other plumbing parts. The putty is hidden under the flange, lip, or edge of the grill and is not visible when the grill is installed. If caulk were used instead of putty, it would be difficult to access these areas to cut through the caulk to remove the part. Plumber's Putty is a very inexpensive material that is sold in small plastic tubs. It is always shaped by hand before it is applied to the plumbing part. Follow the basic instructions on the container of the Plumber's Putty. If your countertop is made of granite, marble, quartz, sandstone or Corian use a stain-free Plumber's Putty to prevent staining of the countertop. 2 INCH (51mm) MINIMUM Since the appliance requires a sufficient supply of fresh air to operate at maximum performance, the cabinet must be designed accordingly. The following is required for this: · The cabinet must have a minimum of two openings; one to allow fresh air to enter and the other for hot air to escape the cabinet. · Opening sizes must be equal to 8 square inches each. This is for ambient temperatures of 85ºF / 30ºC and below. If the ambient temperature around the appliance is above 85ºF / 30ºC then larger ventilation opening sizes may be required. 18 Drain Connection 4 For your convenience, the grill is equipped with a 1/2" NPT brass pipe fitting and 90º brass elbow which you can attach the 5/8" ID flexible hose that came with your grill. The portable version of the grill comes with a brass pipe plug installed in the drain fitting. If you are using your grill as a portable unit, save the hose and 90º brass fitting for possible installation in the future. Installation Final Preparations Prior to Use 5 Remove the protective plastic film from the lid, trim flange and glass panel. Clean the grill before you use it for the first time. A thorough cleaning with a stainless steel or glass cleaner will remove any traces of plastic film adhesives and manufacturing oils. Wash the nonstick coated grates in warm soapy water before using the grill. Drain fitting for 5/8" ID hose 19 KENYON Statement of Warranty Kenyon International, Inc (the "Company") warrants its products in normal usage to be free of defects in materials and workmanship subject to the conditions and limitations below. Any part, which proves to be defective in normal usage during the warranty period will be repaired or replaced by the Company. In order for product to be covered under this warranty it must be returned to the Company for evaluation. Please contact kenyonservice@cookwithkenyon.com for return instructions. This warranty covers certain products built by the Company and is subject to the following conditions and limitations: 1. The Company's liability shall be limited to repair or replacement (choice of remedy at Company's option) of electronic components as may be defective in materials or workmanship. This liability is limited to three years from the date of original installation or 42 months from invoice date, whichever comes first; this warranty covers parts and labor at pre-approved rates. Stainless steel is warranted with a lifetime guarantee to be rust free when cared for monthly as outlined in owner's manual. If corrosion begins, contact the Company with photo evidence of corrosion for replacement components. 2. Determination of suitability of the product for the use contemplated by the Buyer is the sole responsibility of the Buyer and the Company shall have no responsibility in connection with such suitability. 3. The Company shall not be liable for any damage resulting from: · failures due to use of the product in applications for which they are not intended; · failures due to corrosion, wear and tear, abuse, neglect, improper installation or maintenance; · failures due to breakage of glass, accidental or otherwise. 4. The Company shall be responsible for ground shipping charges to the location of the appliance (home) within the Continental United States and Canada. Any duties, express or special shipping charges are at the expense of the Buyer. 5. All labor allowed by the Company under this warranty must be pre-authorized and performed by an Authorized Kenyon International Service Center, unless otherwise specified in writing by the Company. THERE ARE NO OTHER WARRANTIES OF MERCHANTABILITY, FITNESS FOR PURPOSE OR ANY OTHER KIND, EXPRESSED OR IMPLIED AND NONE SHALL BE IMPLIED BY LAW. The duration of any such warranties that are nevertheless implied by law for the benefit of a consumer, shall be limited to a period of three years from original purchase by the user. Some countries do not allow limitations on how long an implied warranty lasts, so this limitation may not apply to you. THE COMPANY SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM THE BREACH OF THIS WARRANTY, WHETHER EXPRESSED, IMPLIED OR STATUTORY. Some countries or states do not allow exclusion or limitation of consequential or incidental damages so this limitation or exclusion may not apply to you. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT MAY VARY FROM COUNTRY TO COUNTRY AND STATE TO STATE. Kenyon International, Inc. P.O. Box 925 · 8 Heritage Park Road · Clinton, CT 06413 USA Phone (860) 664-4906 FAX: (860) 664-4907 Form - F-11-18, Statement of Warranty, Rev. -.docx SAVE THESEPaIgNeS1 TofR1UCTIONS PW MW 20 1/27/2019