Home - Chauvet Lighting
Home - Chauvet Lighting
Manual-Hub.com - Free English product PDF Documents!
User Manual for CHAUVET DJ models including: Gobo Zoom USB DMX Gobo Projector, Gobo Zoom USB, DMX Gobo Projector, Gobo Projector, Projector
CHAUVET DJ GOBO ZOOM USB (01) PDF MANUAL - MANUAL-HUB.COM
File Info : application/pdf, 16 Pages, 1.66MB
DocumentDocumentUser Manual https://manual-hub.com/ TABLE OF CONTENTS 1. Before You Begin .......................................................................................................... 3 What Is Included ............................................................................................................................. 3 Unpacking Instructions.................................................................................................................... 3 Claims..................................................................................................................................................... 3 Text Conventions ............................................................................................................................ 3 Symbols .......................................................................................................................................... 3 Disclaimer ....................................................................................................................................... 3 Product at a Glance ........................................................................................................................ 4 Safety Notes.................................................................................................................................... 4 2. Introduction ................................................................................................................... 5 Product Overview............................................................................................................................ 5 Product Dimensions ........................................................................................................................ 6 3. Setup .............................................................................................................................. 7 AC Power ........................................................................................................................................ 7 Fuse Replacement .......................................................................................................................... 7 Power Linking ......................................................................................................................................... 7 Mounting ......................................................................................................................................... 8 Orientation .............................................................................................................................................. 8 Rigging ................................................................................................................................................... 8 4. Operation ....................................................................................................................... 9 Control Panel Operation.................................................................................................................. 9 Menu Map ....................................................................................................................................... 9 DMX Linking .................................................................................................................................... 9 Configuration (DMX) ............................................................................................................................... 9 DMX Personality and Starting Address................................................................................................... 9 DMX Channel Assignments and Values ......................................................................................... 9 2-CH ....................................................................................................................................................... 9 D-FiTM USB Connectivity...............................................................................................................10 Configuration (D-FiTM USB) .................................................................................................................. 10 Configuration (Standalone) ........................................................................................................... 11 Rotation ................................................................................................................................................ 11 Dimmer ................................................................................................................................................. 11 IRC-6 Infrared Remote Control ..................................................................................................... 11 IRC-6 Operation.................................................................................................................................... 11 Master/Slave Mode (wired) ........................................................................................................... 12 Master/Slave Mode (D-FiTM USB) ................................................................................................. 12 5. Maintenance .................................................................................................................13 Product Maintenance .................................................................................................................... 13 6. Technical Specifications..............................................................................................14 Returns .............................................................................................................................15 Contact Us ........................................................................................................................16 Page 2 of 16 https://manual-hub.com/ Gobo ZoomTM USB User Manual Rev. 1 1. BEFORE YOU BEGIN What Is · Gobo ZoomTM USB Included · Power Cord · Warranty Card · Quick Reference Guide Unpacking Carefully unpack the product immediately and check the container to make sure all the Instructions parts are in the package and are in good condition. Claims If the box or the contents (the product and included accessories) appear damaged from shipping, or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier immediately may invalidate your claim. In addition, keep the box and contents for inspection. For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with Chauvet within 7 days of delivery. Text Conventions Convention 1--512 50/60 Settings Menu > Settings <ENTER> ON Meaning A range of values A set of values of which only one can be chosen A menu option not to be modified A sequence of menu options to be followed A key to be pressed on the product's control panel A value to be entered or selected Symbols Symbol Meaning Electrical warning. Not following these instructions may cause electrical damage to the product, accessories, or the user. Critical installation, configuration, or operation information. Not following these instructions may make the product not work, cause damage to the product, or cause harm to the operator. Important installation or configuration information. The product may not function correctly if this information is not used. Useful information. Disclaimer The information and specifications contained in this document are subject to change without notice. Chauvet assumes no responsibility or liability for any errors or omissions that may appear in this manual. Chauvet reserves the right to update the existing document or to create a new document to correct any errors or omissions. You can download the latest version of this document from www.chauvetlighting.com. © Copyright 2015 Chauvet. All rights reserved. Electronically published by Chauvet in the United States of America. Author R. Isenstadt Date 05/04/15 Editor A. Leon Updated 05/14/15 Gobo ZoomTM USB User Manual Rev. 1 https://manual-hub.com/ Page 3 of 16 Product at a Use on Dimmer Glance Outdoor Use Sound-Active DMX Master/Slave x Auto Programs P x Auto-ranging Power Supply P P Replaceable Fuse P P User-Serviceable x P Safety Notes Please read the following Safety Notes carefully before working with the product. The Notes include important safety information about installation, usage, and maintenance. · Always connect the product to a grounded circuit to avoid the risk of electrocution. · Always disconnect the product from the power source before cleaning or replacing the fuse. · Avoid direct eye exposure to the light source while the product is on. · Make sure the power cord is not crimped or damaged. · Never disconnect the product from power cord by pulling or tugging on the cord. · If mounting the product overhead, always secure to a fastening device using a safety cable. · Make sure there are no flammable materials close to the product when operating. · Do not touch the product's housing when operating because it may be very hot. · The product is not intended for permanent installation. · Always make sure that the voltage of the outlet to which you are connecting the product is within the range stated on the decal or rear panel of the product. · The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose the product to rain or moisture. · Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces. · Be sure that no ventilation slots on the product's housing are blocked. · Never connect the product to a dimmer. · Make sure to replace the fuse with another of the same type and rating. · Never carry the product from the power cord or any moving part. Always use the hanging/mounting bracket. · The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the product at higher temperatures. · In the event of a serious operating problem, stop using the product immediately. · Never try to repair the product. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center. · To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it. Keep this User Manual for future use. If you sell the product to someone else, be sure that they also receive this document. Page 4 of 16 https://manual-hub.com/ Gobo ZoomTM USB User Manual Rev. 1 2. INTRODUCTION Product Overview M ounting Bracket Gobo Holder Thum bscr e w Zoom Thumbscrew Focus Thum bscr e w Bracket Adjustment Knob Display M enu Buttons Fuse Holder Pow er In Safety Cable Pass-Through Fan D-FiTM USB Port Pow er Out DM X In/ Out WARNING! DO NOT plug anything other than a D-FiTM USB into the USB port. Doing so may cause damage to the product. Gobo ZoomTM USB User Manual Rev. 1 https://manual-hub.com/ Page 5 of 16 Product Dimensions 9.6 in 244 mm 9.4 in 238 mm 4.9 in 124 mm Page 6 of 16 https://manual-hub.com/ Gobo ZoomTM USB User Manual Rev. 1 3. SETUP AC Power The Gobo ZoomTM USB has an auto-ranging power supply and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product's power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product's back panel, or refer to the product's specifications chart. The listed current rating indicates the product's average current draw under normal conditions. · Always connect the product to a protected circuit (circuit breaker or fuse). Make sure the product has an appropriate electrical ground to avoid the risk of electrocution or fire. · To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it. Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100% switch. Fuse 1. 2. Replacement 3. 4. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder. Pry the fuse holder out of the housing. Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating. Insert the fuse holder back in place and reconnect power. Installed fuse (held by plastic clip) Spare fuse holder (inside safety cap) Safety cap Disconnect the product from the power outlet before replacing the fuse. Power Linking The product provides power linking via the Edison outlet located in the back of the product. Please see the diagram below for further explanation. 1st Product Power Linking Diagram 2nd Product 3rd Product Addit ional Product s You can power link up to 13 Gobo ZoomTM USB products on 120 VAC or up to 24 Gobo ZoomTM USB products on 230 VAC. The power linking diagram corresponds to the North American version of the product ONLY! If using the product in other markets, you must consult with the local Chauvet distributor as power linking connectors and requirements may differ in your country or region. Gobo ZoomTM USB User Manual Rev. 1 https://manual-hub.com/ Page 7 of 16 Mounting Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. Orientation The Gobo ZoomTM USB may be mounted in any position; however, make sure adequate ventilation is provided around the product. Rigging · · · · · · Before deciding on a location for the product, always make sure there is easy access to the product for maintenance and programming purposes. Make sure that the structure onto which you are mounting the product can support the product's weight. See the Technical Specifications for weight information. When mounting the product overhead, always use a safety cable. Mount the product securely to a rigging point, whether an elevated platform or a truss. When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity. When power linking multiple products, mount the products close enough for power linking cables to reach. The bracket adjustment knobs allow for directional adjustment when aiming the product to the desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the knobs. M ounting Clamp (such as t he CLP15N from Chauvet ) Hanging/ M ounting Bracket (also used as floor support s) Mounting Diagram Safety Cable (such as CH-05 from Chauvet ) Page 8 of 16 Bracket Adjustment Knob x 2 https://manual-hub.com/ Gobo ZoomTM USB User Manual Rev. 1 4. OPERATION Control Panel To access the control panel functions, use the four buttons located underneath the display. Operation Please refer to the Product Overview to see the button locations on the control panel. Button <MENU> <UP> <DOWN> <ENTER> Function Press to find an operation mode or to back out of the current menu option Press to scroll up the list of options or to find a higher value Press to scroll down the list of options or to find a lower value Press to activate a menu option or a selected value Menu Map Main Level 2-CH Gobo U-SEr Programming Levels d 1d512 StoP L-SP L 0L255 r-SP r 0r255 U 0U255 ON OFF Description 2-channel DMX mode No rotation Left rotation speed Right rotation speed Dimmer IR function on or off DMX Linking The Gobo ZoomTM USB works with a DMX controller. Information about DMX is in the CHAUVET® DMX Primer, which is available from the Chauvet website http://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf. Configuration Set the product in DMX mode to control with a DMX controller. (DMX) 1. 2. Connect the product to a suitable power outlet. Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket on the product. DMX Personality and Starting When selecting a starting DMX address, always consider the number of DMX channels the selected DMX mode uses. If you choose a starting address that is too high, you could restrict the access to some of the product's channels. Address The Gobo ZoomTM USB uses 2 DMX channels in a 2-CH DMX mode, which defines the highest configurable address to 511. If you are not familiar with the DMX protocol, download the DMX Primer from www.chauvetlighting.com. To select the starting address, do the following: 1. Press <MENU> repeatedly until 2-CH shows on the display. 2. Press <ENTER> and d 1d512 will show on the display. 3. Use <UP> or <DOWN> to select the starting address. 4. Press <ENTER>. DMX Channel Assignments and Values 2-CH Channel Function 1 Dimmer 2 Gobo Rotation Value Percent/Setting 000 255 0100% 000 Stop 001 122 Left rotation (fast to slow) 123 133 Stop 134 255 Right rotation (slow to fast) Gobo ZoomTM USB User Manual Rev. 1 https://manual-hub.com/ Page 9 of 16 D-FiTM USB The Gobo ZoomTM USB is able to become a D-FiTM wireless receiver/transmitter with the use of the D-FiTM USB from CHAUVET® DJ. Simply set the product's DMX Personality and Connectivity DMX Address, set the DIP switch D-FiTM receiving/transmitting channel, then plug it into the D-FiTM USB port. WARNING! DO NOT plug anything other than a D-FiTM USB into the USB port. Doing so may cause damage to the product. Once plugged in, the D-FiTM USB will take over the product. Wired DMX, manual display control/menu buttons and IRC-6 will be unavailable until you unplug the D-FiTM USB. The priority levels are: 1. D-FiTM USB 2. Wired DMX 3. IRC-6 Remote Control 4. Manual Digital Display/Menu Buttons Configuration 1. Set the DMX Personality and DMX address on your product. (D-FiTM USB) 2. Use the Chart provided to set BOTH: · the Channel, and then · the Receiving or Transmitting option. NOTE: DIP Switch 5 is for Transmitting OR Receiving, please choose carefully. D-FiTM USB DIP Switch Channels RECEIVING TRANSM ITTING Page 10 of 16 https://manual-hub.com/ Gobo ZoomTM USB User Manual Rev. 1 Configuration Set the product in one of the standalone modes to control without a DMX controller. (Standalone) · Connect the product to a suitable power outlet. Never connect a product that is operating in any standalone mode to a DMX string connected to a DMX controller. Products in standalone mode may transmit DMX signals that could interfere with the DMX signals from the controller. Rotation To set the rotation direction and speed for the Gobo ZoomTM USB, follow the instructions below: 1. Press <MENU> repeatedly until Gobo shows on the display. 2. Press <ENTER>. 3. Use <UP> and <DOWN> to select one of the following: · StoP (for no rotation) · L-SP (for left rotation) or · r-SP (for right rotation) 4. Press <ENTER>. 5. For L-SP or r-SP, use <UP> and <DOWN> to increase or decrease the rotation speed. 6. Press <ENTER>. Dimmer To set the dimmer value, do the following: 1. Press <MENU> repeatedly until U-- shows on the display. 2. Press <ENTER> and Uxxx will show on the display: 3. Use <UP> and <DOWN> to increase or decrease the dimmer value. 4. Press <ENTER>. IRC-6 Infrared The Gobo ZoomTM USB is compatible with the IRC-6 infrared Chauvet. To activate IR mode, follow the instructions below: remote control from Remote 1. Press <MENU> repeatedly until SEr shows on the display. Control 2. Press <ENTER> to accept. 3. Press <UP> or <DOWN> to select ON or OFF. 4. Press <ENTER>. IRC-6 Operation Rotation To set the rotation direction: 1. Press <AUTO> on the IRC-6. 2. Press <+> or <> to choose between L-SP, r-SP, or StoP. To adjust the speed of the automatic program: 1. Press <SPEED> on the IRC-6. 2. Press <+> or <> to either increase or decrease the rotation speed. Dimmer To adjust the dimmer level: 1. Press <MANUAL> on the IRC-6. 2. Press <+> or <> to increase or decrease the dimmer level. Black Out To black out the light: Press <BLACK OUT> on the IRC-6. This will turn off the light until the button is pressed again. NOTE: The IRC will not respond to any inputs when Black Out is activated. If the remote does not respond when a button is pressed, try pressing <BLACK OUT>. You may have inadvertently activated Black Out. Gobo ZoomTM USB User Manual Rev. 1 https://manual-hub.com/ Page 11 of 16 Master/Slave The Master/Slave mode allows a single Gobo ZoomTM USB product (the master) to control Mode the actions of one or more Gobo ZoomTM USB products (the slaves) without the need of a DMX controller. The master product will be set to operate in either Automatic or Sound- (wired) Active mode, while the slave products will be set to operate in Slave mode. Once set and connected, the slave products will operate in unison with the master product. Configure the products as indicated below. Slave products: 1. Press <MENU> repeatedly until 2-CH shows on the display. 2. Press <ENTER> to accept. 3. Set the DMX address to d 1. 4. Connect the DMX input of the first slave product to the DMX output of the master product. 5. Connect the DMX input of the subsequent slave products to the DMX output of the previous slave product. 6. Finish setting and connecting all the slave products. Master product: 1. Set the rotation direction and speed on the master product. 2. Make the master product the first product in the DMX daisy chain. · Configure all the slave products before connecting the master to the daisy chain. · Never connect a DMX controller to a DMX string configured for Master/Slave operation because the controller may interfere with the signals from the master. · Do not connect more than 31 slaves to the master. Master/Slave The D-FiTM USB allows a single Gobo ZoomTM USB product (the master) to control the Mode actions of one or more Gobo ZoomTM USB products (the slaves) without the need of a DMX controller or DMX cables. The master (transmitter) product will be set to operate in (D-FiTM USB) either Automatic or Sound-Active mode, while the slave (receiver) products will be set to operate in Slave mode. Once set and connected, the slave products will operate in unison with the master product. Configure the products as indicated below. Slave products: 1. Press <MENU> repeatedly until 2-CH shows on the display. 2. Press <ENTER> to accept. 3. Set the DMX address to d 1. 4. Set the D-FiTM USB to receive on a specific channel, 116. 5. Plug in the D-FiTM USB. 6. Finish setting and connecting all the slave products. Master product: 1. Press <MENU> repeatedly until 2-CH shows on the display. 2. Press <ENTER> to accept. 3. Set the DMX address to d 1. 4. Set the rotation direction and speed on the master product. 5. Set the D-FiTM USB to transmit on the D-FiTM channel the slaves are receiving on. 6. Plug in the D-FiTM USB. · All products must be set to the same DMX personality, DMX address, and D-FiTM channel. · Configure all the slave products before configuring the master to transmit. · Never connect a DMX controller to a D-FiTM channel configured for Master/Slave operation because the controller may interfere with the signals from the master. Page 12 of 16 https://manual-hub.com/ Gobo ZoomTM USB User Manual Rev. 1 5. MAINTENANCE Product Dust build-up reduces light output performance and can cause overheating. This can lead Maintenance to reduction of the light source's life and/or mechanical wear. To maintain optimum performance and minimize wear, clean your lighting products at least twice a month. However, be aware that usage and environmental conditions could be contributing factors to increase the cleaning frequency. To clean the product, follow the instructions below: 1. Unplug the product from power. 2. Wait until the product is at room temperature. 3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external surface/vents. 4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl alcohol. 5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue. 6. Softly drag any dirt or grime to the outside of the transparent surface. 7. Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. Gobo ZoomTM USB User Manual Rev. 1 https://manual-hub.com/ Page 13 of 16 6. TECHNICAL SPECIFICATIONS Dimensions and Weight Power Light Source Photometrics Thermal DMX Ordering Length 9.4 in (238 mm) Width 4.9 in (124 mm) Height 9.6 in (244 mm) Note: Dimensions in inches rounded to the nearest decimal digit. Power Supply Type Switching (internal) Parameter Consumption Operating Current Power linking current (products) Fuse Range 100 to 240 VAC, 50/60 Hz 120 V, 60 Hz 41 W 0.7 A 8 A (13 products) T 1 A, 250 V Power I/O Power input connector Power output connector Power Cord plug U.S./Worldwide IEC Edison Edison (U.S.) Type LED Power 25 W Color Cool white Quantity 1 Parameter Zoom Angle (manual) Illuminance @ 2 m (19°) Illuminance @ 2 m (25°) 19° to 25° 3,075 lux 1,121 lux Maximum External Temp. 104 °F (40 °C) Cooling System Fan-assisted Convection I/O Connectors 3-pin XLR Channel Range 2 Product Name Gobo ZoomTM USB Item Code 03051058 Weight 4.4 lb (12.1 kg) Voltage Selection Auto-ranging 230 V, 50 Hz 39 W 0.3 A 8 A (24 products) T 1 A, 250 V UK/Europe IEC IEC Local plug Lifespan 50,000 hours Current 6 A UPC Number 781462214067 Page 14 of 16 https://manual-hub.com/ Gobo ZoomTM USB User Manual Rev. 1 RETURNS In case you need to get support or return a product: · If you are located in the U.S., contact Chauvet World Headquarters. · If you are located in the UK or Ireland, contact Chauvet Europe Ltd. · If you are located in Mexico, contact Chauvet Mexico. · If you are located in Benelux, contact Chauvet Europe BVBA. · If you are located in any other country, DO NOT contact Chauvet. Instead, contact your local distributor. See www.chauvetlighting.com for distributors outside the U.S., UK, Ireland, Mexico, or Benelux. If you are located outside the U.S., UK, Ireland, Mexico, or Benelux, contact your distributor of record and follow their instructions on how to return Chauvet products to them. Visit our website www.chauvetlighting.com for contact details. Call the corresponding Chauvet Technical Support office and request a Return Merchandise Authorization (RMA) number before shipping the product. Be prepared to provide the model number, serial number, and a brief description of the cause for the return. Send the merchandise prepaid, in its original box, and with its original packing and accessories. Chauvet will not issue call tags. Clearly label the package with the RMA number. Chauvet will refuse any product returned without an RMA number. Write the RMA number on a properly affixed label. DO NOT write the RMA number directly on the box. Before sending the product, clearly write the following information on a piece of paper and place it inside the box: · Your name · Your address · Your phone number · RMA number · A brief description of the problem Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be your responsibility. FedEx packing or double-boxing are recommended. Chauvet reserves the right to use its own discretion to repair or replace returned product(s). Gobo ZoomTM USB User Manual Rev. 1 https://manual-hub.com/ Page 15 of 16 CONTACT US WORLD HEADQUARTERS - Chauvet General Information Address: 5200 NW 108th Avenue Sunrise, FL 33351 Voice: (954) 577-4455 Fax: (954) 929-5560 Toll free: (800) 762-1084 Technical Support Voice: (954) 577-4455 (Press 4) Fax: (954) 756-8015 Email: tech@chauvetlighting.com World Wide Web www.chauvetlighting.com UNITED KINGDOM AND IRELAND - Chauvet Europe Ltd. General Information Address: Unit 1C Brookhill Road Industrial Estate Pinxton, Nottingham, UK NG16 6NT Voice: +44 (0)1773 511115 Fax: +44 (0)1773 511110 Technical Support Email: uktech@chauvetlighting.com World Wide Web www.chauvetlighting.co.uk MEXICO - Chauvet Mexico General Information Address: Av. Santa Ana 30 Parque Industrial Lerma Lerma, Mexico C.P. 52000 Voice: +52 (728) 285-5000 Technical Support Email: servicio@chauvet.com.mx World Wide Web www.chauvet.com.mx CHAUVET EUROPE - Chauvet Europe BVBA General Information Address: Stokstraat 18 9770 Kruishoutem Belgium Voice: +32 9 388 93 97 Technical Support Email: Eutech@chauvetlighting.eu World Wide Web www.chauvetlighting.eu Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux contact your dealer. Follow their instructions to request support or to return a product. Visit our website for contact details. Page 16 of 16 https://manual-hub.com/ Gobo ZoomTM USB User Manual Rev. 1