Artlii Play 4 Instruction Manual

Significant Considerations

Correct ways to use the device

• Directing the lens towards human eyes is prohibited in order to avoid eye damage caused by the glare of the lens after the device starts.
• Air inlet/outlet must be kept clear to avoid damage to internal electronic components caused by failure of heat dissipation.
• Tissue, cloth and other cleaning tools are prohibited to contact the lens for cleaning in order to prevent the lens from damage. Dust on the lens surface must be removed by cleaning air-blowing.
• Chemicals, detergents or clean water are prohibited for cleaning to avoid corrosion of the circuit board by rain, moisture and liquids containing minerals.
• The device and its parts, along with its accessories must be placed out of the reach of children.
• The device must be operated in dry and ventilated conditions.
• The device must be stored in temperate places, as high (low) temperatures will shorten its service life. The allowable storage and use temperature is 0 ~ 40°C.
• The drying of the device in any heating equipment (dryers, microwave ovens, etc.) is prohibited.
• Squeezing or adding shelters on the top and/or the back of the device is prohibited in order to avoid its damage.
• Dropping, striking or violently shaking the device are prohibited in order to avoid damage to the internal circuit board and optical components.
• Dismantlement of the device with autonomy is prohibited. Contact after-sales services of Gammabai for any questions.
• Independent repair of any products is prohibited. Contact after-sales services of Gammabai in a timely manner for consultation or return-to-factory maintenance if there exist any failures of the device or its parts.

CAUTION: Don't look into the lens while the projector is working!

CAUTION: Attention to the heat from the air outlet!

1. Interface Introduction

The projector features various ports and buttons for operation. Key elements include:

• Remote Control Buttons: Power, UP, Left, Right, Down, OK, Back, Volume -, NETFLIX, Focus.
• Projector Buttons: Return, Left, Right, UP, Down, OK, F+/F-, Focus, Power.
• Ports: HDMI 1, HDMI 2, USB 1, USB 2, IR.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

2. Installing TV Box

1. Step 1: Locate the opening on the side of the machine and open it.
2. Step 2: Insert the TV box into the corresponding connection port. This involves connecting the Micro-USB and Mini HDMI cables to the respective ports on the projector. Ensure correct alignment for both left and right views.
3. Step 3: Cover the side cover to complete the installation.

3. Remote

The remote control allows for operation of the projector and the ATV. Key buttons include:

• Power: Turns the device on/off.
• Navigation: UP, Left, Right, Down, OK, Back.
• Function Buttons: Volume -, Volume +, Google Assistant, ATV Home, NETFLIX, Prime Video, Projector Setting.
• Indicator Light: Red indicates control of the projector; Blue indicates control of the ATV.

4. Power On/Off

Plug in the device and then click the Power button [power-symbol] to start it. When the device is working, click the Power button [power-symbol] to shut it down.

5. Keystone / Focus

Adjust projection settings for optimal viewing.

Projection Settings

• Projection Mode: Front-Desktop
• Automatic Keystore: ON
• Manual Keystore
• Automatic Focus: ON
• Manual Focus
• Digital Zoom

Manual Focus: Press the Focus button [focus-symbol] to enter Manual Focus mode. Use the Left or Right buttons to adjust focus. Press OK to end the focus adjustment.

6. WiFi Setting

Connect to a wireless network:

• Navigate to Projector Setting > Settings > WiFi Setting.
• Toggle WiFi ON/OFF.
• Select your network (e.g., Artlii_VPN_5.0G) and enter the password.
• The status will show 'Connected'.

7. iOS Miracast

Mirror your iPhone, iPad, or iPod touch screen to the projector.

Ensure your iOS device is connected to the same network as the projector.

1. On your iOS device, open Control Center and tap Screen Mirroring.
2. Look for devices that can be mirrored.
3. Select 'Artlii-Play4-***' from the list to start mirroring.

Navigate via: Projector Setting > iOS Cast.

8. Android Miracast

Connect your Android mobile device or tablet to the projector using WiFi-Display Technology.

1. On your Android device, turn on WLAN (connecting to a Wi-Fi router is not necessary).
2. Launch the Multi-screen / Wireless Display / Screen Mirroring / Smart View function.
3. Select 'Artlii-Play4-***' from the searching result list to start mirroring.

Navigate via: Projector Setting > Miracast.

9. Bluetooth Setting

Connect Bluetooth devices:

• Navigate to Projector Setting > Settings > Bluetooth Setting.
• Ensure Bluetooth is ON.
• Tap 'Scan for devices' to find available devices.
• Select a device from 'Paired devices' or 'Available equipment'.

10. Digital Zoom

Adjust the zoom level of the projected image.

Navigate via: Projector Setting > Settings > Projection Image Setting > Digital Zoom.

Use the 'Adjust' buttons [<◇>] to change the zoom percentage. Press 'Back' [back-arrow] to return, and 'Reset' [reset-symbol] to revert to the default zoom.