1:10 Electric 4WD RC Car Frame TT02B: Introduction and Safety Guide

Product Introduction

This document introduces the 1:10 Electric 4WD RC Car Frame, specifically the TT02B model. It is designed for users aged 14 years and older. Users are advised to use this instruction manual in conjunction with the R/C system instruction manual.

Safety and Cautions

Operating the RC car requires adherence to several safety guidelines to prevent accidents and damage:

• Operation Environment: Never operate the model on public roads or streets, in crowded areas, near people or animals, or near rivers, ponds, or lakes. This is to prevent traffic endangerment, property damage, personal injury, or the model falling into water.
• Frequency Interference: Ensure no other users are operating on the same frequency in your running area to avoid loss of control and potential accidents.
• Power-On/Off Procedure: Always follow the correct procedure: fully extend the transmitter antenna, switch on the transmitter, then switch on the R/C model. For shutdown, reverse the procedure.
• Operation Precautions: Never touch or hinder rotating tires. Avoid running the R/C model in the rain or over puddles, as water can cause operational issues.
• Temperature Caution: Motors and batteries can become very hot after running. Handle them with care and allow them to cool down before touching.
• Antenna Handling: Retract the transmitter antenna when not in use. Be cautious as the front end of the antenna may be dangerous; do not aim it toward faces.
• Battery Handling: Do not dismantle batteries or chargers, or cut battery cables, as this can cause short-circuits or damage. Use only compatible chargers and follow proper charging procedures. Do not recharge batteries that are still warm. Disconnect charger cables from the model and the power outlet when not in use. Remove transmitter batteries if not using the transmitter for a long time to prevent leaks. Never incinerate used batteries, as they can explode.
• General Safety: As the product includes small and sharp parts, assemble and store it out of the reach of children.

Assembly Diagrams

The document includes detailed exploded diagrams that illustrate the assembly process for the 1:10 Electric 4WD RC Car Frame. These diagrams show the arrangement and connection of various parts and components required for building the model.

Thank you for your support!