Enough Power Smart Watch Manual

Watch Charging and Activation

Align the magnetic charging cable with the metal electric shock of the charging port until the charging indicator appears on the watch screen. When the watch prompts low battery, please charge it in time. The device is an all-in-one machine; the back shell and the battery cannot be removed.

[Smartwatch display showing time (10:09:30), power level, steps (10349), calories (103.4 kcal), and day (WED).]

Close-up of the magnetic charging port on the back of the smartwatch.

Mobile Client Download

Scan the QR code below to download and install the mobile client FitCloudPro.

[QR code for downloading and installing the FitCloudPro mobile application.]

Watch Connection Instructions

1. Open FitCloudPro to set personal information.
2. Switch to the Devices page and click Add Device.
3. Click your device binding in the scanned device list (or open the QR code binding of the scan code watch in the upper right corner).
4. The watch receives a prompt message and clicks Agree.
5. The APP side pops up an audio binding request, and selects Pair and Connect.
6. Binding complete.

Note: If the audio Bluetooth is not automatically connected during the binding of the watch, two methods are solved:

• Mobile phone - Settings - Bluetooth - Click on watch model.
• The phone enters the FitCloudPro APP - Settings - Unbind, and then rebind.

Introduction to Features

Full Touch: Slide down to access the control center, swipe up to view information notifications, swipe left to enter the shortcut function, swipe right to enter the split-screen menu. Press and hold the main screen for 3 seconds to switch the watch face mode.

Button: Short press to enter the function menu / exit the menu function; Long press to turn on and off; Double-press on the function menu interface to switch the function menu display mode.

Special Feature: Local Music Connection TWS and Recording

Music: Local music copy. Connect the watch to a computer with a data cable. You can see the U disk on your computer, open the U disk and copy the music to the AUDIO folder. The icon in the lower right corner can toggle between connecting TWS and playing local music outside the watch.

Smartwatch music player interface showing playback controls and time (18:01).

Recording: Click the red circle ▶️ to start recording. Save the recording after recording and view it in the menu. Select one of them and click to play the recording. ❌ is to delete the recording, swipe right to return to the list. Below the list of recordings is the option to delete all recordings.

Smartwatch recording interface showing a timer (00:00:00) and a red record button.

Basic Functionality

Control Center: Function overview: Do Not Disturb ?, Flashlight ?, Brightness ?, Settings ⚙️, Find Phone ?, Battery Saver ?, System Information ℹ️.

Smartwatch Control Center icons including Do Not Disturb, Flashlight, Brightness, Settings, Find Phone, Battery Saver, and System Information.

Call Functionality: This function needs to be connected to audio Bluetooth. When entering the dial, you can enter the phone number as needed and dial. Keyboards 7, 9, long press 2s to enter * and #.

Smartwatch dial pad for entering phone numbers.

Frequent Contacts: You need to add contacts in the common contact bar settings on the app. The set common contacts will be automatically synchronized to the device, and up to 10 contacts can be added.

Smartwatch contact list showing names (Alin, Jack, Youna) and partial phone numbers.

Call Bluetooth

Tap the phone icon ? in the Control Center to turn Audio Bluetooth on. The blue status ? is On.

Bluetooth status indicator showing 'On' (blue).

Motion Data

Display the steps, distance, and calorie data recorded for the day. The step data of the last seven days can be seen by swiping on the interface. You can set the target steps, distance, and calories in the APP.

Smartwatch display showing motion data: 300 steps, 23167 distance, 2.6 calories.

Heart Rate

When entering the heart rate measurement interface, the bottom green light lights up to start measuring. There will be a vibration reminder when the measurement is completed in about 45 seconds. If it says "watch not worn", you need to wear the watch again. It can display the user's current heart rate zone and 24-hour heart rate curve (visible by swiping on the interface).

Smartwatch heart rate monitor showing 90 BPM, with current heart rate zone indicators.

Sleep

Display the sleep of the day & sleep monitoring status of the last seven days (visible by swiping on the interface). The data is updated every day and can be saved synchronously when the APP is connected. The device will recalculate the data information of the new day. Sleep monitoring period: 21:30-12:00.

Smartwatch sleep monitoring display showing 07 H 50 M duration, with breakdown for deep sleep (05 H) and light sleep (02 H).

Motion

Sports mode options: 8+1 kinds (walking ?, running ?, mountaineering ?, cycling ?, basketball ?, badminton ?, football ⚽, yoga ? as pushable alternative sports). Click the icon to start sports. You can support 110+ sports push on the APP side.

Icons representing various sports modes: Walking, Running, Climbing, Cycling.

Exercise Record

The interface saves your last 10 exercise history, and you can view the exercise time, heart rate, calories, and other data during exercise.

Smartwatch exercise record summary showing 532 Kcal, 3.86 Km (08/30), 4.32 Kcal (04/25).

The watch does not turn on

1. Please press and hold the power button for more than 3 seconds.
2. Charge for a longer time and then turn it on.

The watch does not charge

1. You can replace the charging head for testing, or plug into a computer USB port for testing.
2. Check whether the charging cable is correct and whether the charging cable is damaged.

Bluetooth is not connected or cannot be connected

1. Try restarting your watch and reconnecting it.
2. Please try restarting the Bluetooth of the phone and connecting again.
3. Do not connect other Bluetooth devices to the mobile phone at the same time.

Inaccurate measurement of heart rate/blood pressure/blood oxygen/ECG

1. Generally, when measuring, the sensor of the watch must be in good contact with the human body, and full contact is required.
2. For those with darker skin and more arm hair, please turn on enhancement measurement in the App [Device > Enhancement Measurement].

Sleep data is not accurate enough

1. Sleep monitoring is to simulate the natural state of falling asleep and getting up time, and needs to be worn normally.
2. Wearing it too late or falling asleep late may cause errors.
3. Do not monitor sleep data during the day; the default sleep monitoring is from 9:30 p.m. to 12:00 noon the next day.