User Manual for NATIONAL INSTRUMENTS models including: FP-TC-120 Thermocouple Module, FP-TC-120, Thermocouple Module, Module

Note to Users: Updating Your Firmware and Software for Use with the FP-TC-120 - National Instruments

321995

Technical Publications

⭳ Download pdf

FP-1000 National Instruments Network Interface | Apex Waves


File Info : application/pdf, 3 Pages, 1.35MB

PDF preview unavailable. Download the PDF instead.

note-to-users--updating-your-firmware-and-software-for-use-with-the-fp-tc-120
FP-1000

NOTE TO USERS
UPDATING YOUR FIRMWARE AND SOFTWARE FOR USE WITH THE FP-TC-120
To use the FP-TC-120 thermocouple module with a FieldPoint FP-1000 or FP-1001 network module, the network module must have a firmware revision of 14 or greater. Network modules of revision "C" or greater are shipped with a firmware revision of 14 or greater. The revision letter of the network module is printed on the bottom of the module--it is the letter in the part number. For example, a revision "C" FP-1000 will have a part number of 184120C-01, while a revision "B" will have a part number of 184120B-01.
You can also determine the firmware revision using the FieldPoint Explorer program by typing Revision as the device name for a network module in the Device Configuration window. The current firmware revision number of the network module will be displayed.
If you have a network module that does not have a firmware revision of at least 14, you must upgrade the firmware of the network module to use it with the FP-TC-120. National Instruments supplies an update utility, FPUpdate, to update the firmware to the latest version. You can download this utility from the National Instruments FTP site at: ftp.natinst.com/support/fieldpoint/update
In addition, if you are using the FieldPoint Explorer or FieldPoint Server with the FP-TC-120, you need version 1.6 or later of the software. The latest released version of these programs is shipped with the FieldPoint Software and Documentation Kit (National Instruments part number 777520-01) or may be downloaded from the FTP site at: ftp.natinst.com/support/fieldpoint/server
Beta versions of these programs, when available, may also be available for downloading from the FTP site.

FieldPoint TM is a trademark of National Instruments Corporation. Product and company names are trademarks or trade names of their respective companies.

321995A-01

© Copyright 1998 National Instruments Corp. All rights reserved.

March 1998



References

GPL Ghostscript 9.55.0