Trufrost – The new vocabulary of cooling & foodservice
User Manual for TRUFROST and BUTLER models including: EF-12 Auto Tabletop 12 Litre Single Tank Electric Fryer, EF-12 Auto, Tabletop 12 Litre Single Tank Electric Fryer, 12 Litre Single Tank Electric Fryer, Single Tank Electric, Electric
EF-12 Auto – Trufrost
File Info : application/pdf, 8 Pages, 370.62KB
DocumentDocumentUSER MANUAL Tabletop 12 Litre Single Tank Electric Fryer with 1baskets: EF-12 Auto User Manual This series of electric blast furnace is developed by the company and absorbing the advantages of similar products at home and abroad. With a novel style, the structure Reasonable, easy to operate, durable, easy to maintain the advantages. Thermostatic temperature control, the temperature can be adjusted in a certain range according to the food requirements. It is the ideal equipment for hotels, supermarkets, restaurants, western restaurants, fast food restaurants and other food industries kW: Rated Input Power Hz: Supply mm: Linear measure kg: Mass weight unit ~: AC Power Symbol 380V: 3Phase alternative current 380V ~3N: 3Phase AC with neutral line : Protective grounding wire symbol : Equipotential symbol (identification) Those terminals that connect to the same potential for all parts of the device or system, which are not necessarily the ground potential, such as local interconnect lines) 2 User Manual Technical Parameters Model Description Electrical Power No. of Tank Temperature Net Dimensions Tank Capacity Range Weight (WxDxH)mm Intelligent lifting EF - 12L and blast furnace 220V/50Hz 3 Kw 1 12 50-200 15 270x 585x 380 The furnace shall be carefully placed and not inverted to prevent damage to the product enclosure and interior. Packed stoves should not be stored in the open air for a long time, but should be stored in well-ventilated warehouses without corrosive gases. For a temporary storage, rainproof measures should be taken. 1. The power supply voltage must comply with the voltage used by the equipment 2. When the appliance is connected to the power supply, connect the 3mm electric shock range full pole disconnection device (leakage switch). 3 User Manual 3. Ground bolts behind the furnace body, which shall be not less than 4mm² copper core connected to the ground wire conforming to the safety regulations. 4. Before installation, check whether each connection line is loose, whether the voltage is normal, and whether the safety grounding is reliably connected. 5. Flammable and explosive items should not be stored near the installation location. 6. The installation of the furnace should be operated by professional technicians. 7. The furnace should be placed in a stable place, the left and right side left above 10cm, the back should leave the non-combustible (such as brick wall, Windows, etc.) above 20cm. 8. When the minefield is close, break the switch as soon as possible. Avoid electrical damage caused by lightning strikes. 9. Do not use hard and sharp objects to destroy the surface of the furnace body. 10. Please do not put the too wet food into the oil tank to fry, and dry the wet food before entering the oil. Before frying, make sure the food is free of ice crystals and excess moisture before frying. Easy to cause overboiling, sputtering, scald. 11. Please do not add more than the maximum limited amount of food to the oil cylinder, which may easily cause overboiling, sputtering and scald. 12. After the work, close the switch. 13. Circuit installation and maintenance must be carried out by qualified professional engineers. 14. If the power cord is damaged, it must be replaced by the manufacturer or its maintenance department or similar professional personnel to avoid danger. 4 User Manual order number 1 2 3 4 5 graphic description [Energy saving / Cancel] Key, press this key to enter the energy saving state, in the energy saving and working state, press the key to cancel the original working state, enter the standby state. [Set up / PROG] Key. Press this key long for 10 seconds to enter the PROG parameter setting state, and press this key to exit the PROG parameter setting state. [Temperature query / Temp] press the key to query the current set temperature, press the key to query the actual temperature, and then press to query the current set temperature. [Add / Add button]. Press this key in the working state to raise the fried blue. When setting, press the key to increase the setting value. [Reduce / Dec key]. Press this key in the working state to drop the blue explosion. When setting, press this key to reduce the setting value. 5 User Manual [1] Press the key in the standby state to start the cooking work 6 of the menu. Adjust the parameters of the menu when the PROG parameter is set 1-9 The menu button is the same and can remember the parameter data for a long time [0] Key, temporary often variable menu key, need to often adjust 7 the time and temperature of the cooking work press this key, this key adjustment parameter will not be remembered 8 [10% Delay / Time Delay] Key, in the working menu, because frying multiple food needs to extend the time, press this key according to the set percentage of delay (Default is 10%) Late the menu, usually press for 2-3 copies. 9 [30% Delay / time Delay] button, with the same function as 10% delay / Time Delay button, and pressed for 4-5 times (default is 30%).; The percentage of both keys can be set, either by 30% or by%10. When the machine works automatically in the first item above, the machine can have two choices: 1. Pr-1 pattern: No matter what the oil temperature in the pan, the frying basket immediately begins the countdown to cooking; apply in the oil temperature has been heated, the user Compare experienced case use.This mode is generally not recommended. 2. Pr-2 pattern: You have to wait until the oil temperature rises to the temperature we set before you automatically drop the basket and start cooking. This mode is normally used, and our machine is used by default. 3. Switching of the Pr-1 and Pr-2 modes [PROG] PROG [10% TIME DELAY] Pr-1 Pr-2 [10% TIME DELAY] Long button, until the right digital tube shows "", long press the button, the digital tube shows "" or "", long press the button again to switch the working mode you need, such as display "", after the button exits this set mode, the later working mode is the mode. Pr-2 [PROG] Pr-2 6 User Manual Problem / code cause Rx No effect with the power turned on The blast furnace is not heated The blast furnace is not heated The oil bubbles or boils The circuit is disconnected Check whether the socket is plugged in and check the open circuit implement The electric heat tube is not set flat · High temperature protection disconnection contactor fault · Computer board failure Flat the electric heat pipe · Reduction high temperature protection · Replace the contactor · Replace the computer board · There is water in the oil · Old oil was used · There are residues in the pot · Remove the oil and clean the cylinder · Replace the oil · Clean the cylinder and dry completely E1 The temperature control Check whether the temperature control probe is open probe is loose or disconnected E -2 High temperature alarm Check for the bonding of the control heating solenoid and the contactor E -3 Motor sensor fault Check for poor lift sensor contact E -4 Motor movement timeout Check the lift sensor for poor contact or fault a failed motor control relay Daily inspection Routine inspections must be performed regularly Regularly check the products to prevent serious accidents. Feel the circuit, machine fault, to stop using. Check the status of the machine before / after use every day. Before use In use Is the machine tilted? Is the control panel aging? Is the power cord aging, cracked, or broken? Is there a burnt bad smell, a bad smell? Is the temperature out of control or have leakage phenomenon? Cleaning and maintenance 1. Before cleaning, cut off the power supply first to prevent accidents. 2. After finishing the work every day.Towels without corrosive detergent can be used to scrub the guard plate, furnace body surface and power cord, it is strictly prohibited to wash 7 User Manual directly with water, to prevent water infiltration, damage to electrical performance, resulting in electricity safety accidents 3. Turn off the thermostat and power switch at any time 4. When not used for a long time, the stove should be cleaned and placed in a well-ventilated warehouse without corrosive gas. Marketed globally by: TRUFROST AND BUTLER PRIVATE LIMITED 1215, 12th Floor, Tower B, Emaar Digital Greens, Golf Course Extn. Road, Sector 61, Gurugram 122011 (India) T. +91-7303166766 info@trufrost.com www.trufrost.com 8