User Guide for FIRECOM models including: DECT7 Wireless Connect, DECT7, Wireless Connect
NEW BLUETOOTH PAIRING BLUETOOTH USE Use or - on the Firecom Connect or your Bluetooth device to adjust volume. Bluetooth pairing time out is 40 seconds on the Firecom Connect.
Act.soneticscorp.com
Customer Service and Technical Support - Firecom
File Info : application/pdf, 8 Pages, 739.83KB
DocumentDocumentFIRECOM CONNECT Quick Start Guide BASIC FEATURES--CONTROLS 3.5mm Headset Jack Power Button USB Port (not shown) Volume Up Push-to-Talk Volume Down (device mute) STATUS LED FUNCTIONALITY Battery level and connection status are indicated by the LEDs as shown below: DECT Bluetooth Mic (transmit) Power 100% to 50% battery 50% to 25% battery 25% to 5% battery (flashing) 5% or less battery Connection Status When powered on, the LEDs indicate the following connection status: LED Status Lights (blinking/solid) DECT DECT Bluetooth Bluetooth Mic Mic Pairing/reconnecting Paired Pairing/reconnecting Paired Device Mute ON Radio transmit or Intercom On/Toggle transmit Charge Status When plugged in, the color of the Power LED indicates the charge status. Fully charged Charging NEW BLUETOOTH PAIRING 1. Turn ON your Bluetooth device. 2. Turn ON the Firecom Connect. 3. Make sure your Bluetooth device is in pairing mode (follow your manufacturer's instructions). 4. Put the Firecom Connect into pairing mode by simultaneously pressing PTT and + buttons, then hold for 2 seconds and release. Bluetooth LED should be blinking Blue. 5. Pairing successful when Bluetooth LED is solid Blue. BLUETOOTH USE Use + or - on the Firecom Connect or your Bluetooth device to adjust volume. Bluetooth pairing time out is 40 seconds on the Firecom Connect. DECT PAIRING For first use: 1. Place Base Station into pairing mode (see Base Station manual for details). 2. With the Firecom Connect powered on, simultaneously push and hold the PWR and PTT buttons for 2 seconds, then release. The DECT LED light will blink green while pairing. 3. The status LED will be solid green when connection is successful. If it is not, repeat the pairing process. CHARGING Use supplied USB-C charging cable and AC wall adapter. WEAR OR MOUNT YOUR FIRECOM CONNECT WARNINGS: Magnets can pinch and break bones. Use extreme caution when handling magnets to avoid magnets snapping or slamming together. Do not put hands, fingers or any other body parts between magnets. Use caution to keep magnets at a safe distance from metals, steel and other magnets to avoid instant impact, splintering or breakage. Magnetic fields, especially those produced by rare earth magnets, can affect pacemakers and other implanted medical devices. Extreme care should be taken to keep magnets away from these devices to avoid deactivation. Please consult a medical professional if there are any questions regarding an implanted device and magnets. Complete manual available at firecom.com/support www.firecom.com 800-527-0555 17600 SW 65th Ave Lake Oswego, OR 97035 USA © Firecom Corporation. All Rights Reserved. The information in this document is subject to change without notice. No part of this document may be copied or reproduced in any form without the prior written consent of Sonetics Corporation. 600-3097-00 Rev AAdobe PDF Library 15.0