Installation Guide for AURA models including: Choice Interior Strip Kit, Choice Strip Kit, Interior Strip Kit, Strip Kit
AURA LED CHOICE Interior Strip Kit Manual
INSTALLATION Decide where to locate the light strips and ensure wiring has enough length for control box to be installed in desired location. STEP 1
DISCLAIMER OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation. If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance. OPT7 recommends installation for safety and guidance. Modified installations or installation recommendations not specified by OPT7 Lighting will void product warranty. TM CHOICE INTERIOR INSTALLATION GUIDE MAIN COMPONENTS Light Bar: 8.85 x 0.55 x 0.36 inch AURA CONTROL KITS Light Strip Wire Length: 49.21 inch x 2 pc 68.89 inch x 2 pc ON OFF RED GREEN BLUE WHITE ORANGE YELLOW CYAN PURPLE JUMP3 JUMP7 FADE3 FADE7 1 2 3 4 CIGARETTE LIGHTER POWER ADAPTER HAND HELD REMOTE INSTALLATION STEP 1 Decide where to locate the light strips and ensure wiring has enough length for control box to be installed in desired location. Once connected, plug the control box Cigarette Power Adapter into an available 12 volt charging port. 12 VOLT CHARGING PORT CIGARETTE POWER ADAPTER STEP 3 Thoroughly clean the surface where you plan on mounting the LED strip with rubbing / isopropyl alcohol. (This part is essential for a firm and long lasting placement. A dirty surface will prevent the strip from attaching firmly.) Tear off the 3M Double-sided tape and firmly press the LED strip to the mounting area and hold for 3 seconds. 3M 3M STEP 2 Secure control box in desired location. But ensure that the protruding IR sensor and Sound sensor are placed in an direct line of contact with the remote. Ensure the control box is safely and securely hidden from exposing elements of moisture. Sound sensor IR sensor STEP 4 Using the included E-Z Remote, select your desired color or pattern. Dimmer Color Selection Multi-Color Jump Adjust speed with "Dimmer" buttons Sound Sync ON OFF RED GREEN BLUE WHITE ORANGE YELLOW CYAN PURPLE JUMP3 JUMP7 FADE3 FADE7 1 2 3 4 On / Off Multi-Color Fade Adjust speed with "Dimmer" buttonsAdobe PDF library 15.00 Adobe Illustrator(R) 17.0