BLAUPUNKT BLP3790-001 Bluetooth Wireless Speaker

Safety Precautions

Read these safety instructions before using your device and store them for possible future reference.

• The device is not intended for use by persons (including children) with reduced physical, sensory or mental capacity. Persons who have not read the manual, unless they have received explanations by a person responsible for their safety and supervision should not use this unit.
• Children should be monitored to ensure that they do not play with the device.
• The device should always be readily accessible.
• The device should not be exposed to dripping or splashing water.
• No objects filled with liquids such as vases shall be placed on the device.
• Always leave a minimum distance of 10 cm around the unit to ensure sufficient ventilation.
• Open flame sources, such as candles, should not be placed on top of the device.
• The device is intended for use only in a temperate climate.
• At full volume, prolonged listening to the portable audio device may damage the user's hearing and cause hearing troubles (temporary or permanent deafness, hearing drone, tinnitus, hyperacusis).
• Therefore, it is recommended not to listen to the portable audio device at high audio volume and no more than one hour per day at medium audio volume.
• CAUTION: Danger of explosion if battery is incorrectly replaced or not replaced by the same type or equivalent.
• The battery should not be exposed to excessive heat such as sunshine, fire or similar.
• Different types of batteries, new and used batteries should not be mixed.
• The battery must be installed according to the polarity.
• If the battery is worn, it must be removed from the product.
• The battery must be disposed of safely. Always use the collection bins provided (check with your dealer) to protect the environment.
• The battery cannot be replaced by the user, but only by the maker of this product, the after sales department or a qualified person.

Switch Off in Restricted Areas

Switch the device off where the use of the device is not allowed or where there is a risk of causing interference or danger, for example on board an aircraft, near medical equipment, fuel, chemicals or blasting sites.

Road Safety Comes First

Check the current laws and regulations regarding the use of this device in the areas where you drive.

• Do not handle the device when driving.
• Concentrate fully on the driving.
• Radio signals could affect some of the car's electronic systems such as the audio stereo and alarm systems.

Interference

All wireless devices are susceptible to interference which may affect their performance. All devices conform to international standards and regulations, and if need be national ones, with a view to limiting user exposure to electromagnetic fields. These standards and regulations were adopted after the completion of extensive scientific research. This research established no link between the use of the mobile headset and any adverse effects on health if the device is used in accordance with standard practices.

Authorised Personnel

Only qualified people are authorized to install or repair this product.

Accessories

Only use batteries, chargers and other accessories which are compatible with this equipment. Do not connect incompatible products.

Children

Keep your device in a safe place, out of the reach of young children. The device contains small parts that may present a choking hazard.

Specifications

• Rated voltage: DC 5V ⎓ 500mA
• Max consumption: 2.5W
• Li-ion battery: 1200mAh
• Sound power: 2 x 8W
• Max RF power: 1.58mW
• Radio frequency: 87.5-108MHz
• Frequency range: ≥85Hz-20KHz
• Bluetooth compatible version: 5.0
• Distance Bluetooth stays connected: 10m
• Music playing time: Around 3-4 hours
• Charging time: 2-3 hours
• Size: 175 x 80 x 80mm
• Weight: 570g

Product Presentation

The Blaupunkt BLP3790-001 is a black cylindrical Bluetooth wireless speaker with a top control panel and various ports on the side/bottom. The top panel features control buttons, while the side/bottom houses connectivity ports.

Control Layout and Functions:

1. Track Back Button (<): Press for previous song.
2. Power Button (⏻): Long press to turn ON/OFF the Bluetooth speaker.
3. Mode Switch Button (M): Click to switch between Bluetooth mode, AUX mode, FM mode, etc.
4. Track Forward Button (>): Press for next song.
5. Micro USB Charging Port (DC 5V): For charging the device.
6. TF/SD Card Input Port (TF): For playing music from a TF/SD card.
7. AUX Input Port (AUX): For connecting external audio devices via an AUX cable.
8. USB Input Port (USB): For playing music from a U-Disk.

Volume Up Button (Λ): Increases volume.

Volume Down Button (V): Decreases volume.

Function Operating Instructions

1) Play / Pause:

In standby mode, click the power button to play music directly, and press again to pause playback.

2) Call Answer:

When the phone rings, click the power button to answer the call.

3) Call Hang Up:

When calls end, click the power button to hang up the phone. When receiving a call and wanting to decline it, press and hold the “Track back” button to reject the call.

4) Last Number Redial:

While on standby or playing music, double-click the power button to dial the last call in your call log.

5) FM Function:

The FM function works when the micro USB charging cable is plugged in and used as an antenna. In FM mode, click the power button to search for radio stations; the blue lights will flash. After searching, the blue lights will stop flashing. Then press the “track back” button for the previous radio channel and the “track forward” button for the next radio channel.

6) TWS Function:

In Bluetooth mode, long press the “M” button. A voice message “ding” will indicate that the speaker is searching for another device. Within 2-3 seconds, both speakers will automatically connect with a voice message “ding” indicating TWS successful.

Note: Ensure that both speakers are not connected to any phone device at the same time, or you will need to disconnect them from the phone for TWS pairing to occur. To disconnect the TWS function, press and hold down one of the “M” buttons.

Remark

1. Boot Back: When pairing is successful, the second Bluetooth speaker will automatically connect to the previously connected phone upon subsequent power-on.
2. Low Battery Prompt: When the Bluetooth speaker battery power is low, it will issue a low battery tone.
3. Click: Means pressing a button 1-time.
4. Long Press: Means pressing and holding the button for 2-3 seconds.

Bluetooth Pairing

1. Once powered ON, the blue lights flash, and the device enters the search pairing state.
2. Start Bluetooth on your phone or other equipment. If using an Android system phone or device, click on the phone search for “BLP3970” to find the device name. If using an iOS system phone or device, it will automatically search for equipment. When the model of the Bluetooth speaker is found, click to enter pairing. After successful pairing, the speaker will issue a successful tone, the blue lights will stop flashing, and the speaker will enter the connection standby state.

Frequently Asked Questions

Precautions

• Please store and use the product in a room temperature environment.
• Do not expose this product to rain or wet conditions.
• Do not drop or bump this product.
• Do not disassemble or repair the speaker yourself. Disassembling this product will invalidate the warranty.
• Please use the power charger with the rated voltage for the speaker.
• It may cause hearing damage if playing music at high volume for a long time. Consider avoiding excessively high volume when playing music for a long time.

Declaration of Conformity UE

Dag Technologie®, hereby declares that this equipment conforms to the essential requirements and other relevant provisions of Directive 2014/53/UE. The declaration of Conformity can be viewed at the following address: http://www.mms-support.net/OTA/ECD_DAG_BLP3790-001.pdf

The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol (?️) on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.

The product bears the CE mark ( conformidad europea symbol) indicating compliance with European safety standards.

To avoid possible hearing damage, do not listen at high audio volume for long periods of time. A symbol depicting an ear with a sound wave and an exclamation mark (⚠) indicates this warning.