Important Warnings
⚠️ NEVER START OR STOP THE GENERATOR WITH ELECTRICAL DEVICES CONNECTED OR TURNED ON!
Read the ENTIRE operator's manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property, and cause serious injury or even death.
Setup Instructions
- Open Shipping Carton
Unpack the generator from its shipping carton.
Diagram shows an open shipping carton with the generator inside. - Remove Shipping Support Hardware
Remove any shipping support hardware from the generator.
Diagram illustrates the removal of specific support components from the generator. - Connect the Battery
Push the two halves of the battery connector together tightly.
Diagram shows two battery connector halves being joined together. - Add Engine Oil
Recommended: 10W-30, up to 16.9 fl. oz. (500 ml). DO NOT overfill.
Diagram shows an oil bottle labeled 10W-30 being poured into the generator's oil fill port. - Move Generator Outdoors
Move the generator to an open, outdoor area. Point exhaust away. Never run the generator in enclosed areas (e.g., not in a house or garage).
Keep all objects at least 5 feet (1.5 m) from the generator. Heat from the muffler and exhaust gas can ignite combustible materials.
Diagram shows the generator outdoors with an arrow indicating exhaust direction. A warning symbol is present, and text indicates a 5ft/1.5m clearance. - Add Fuel
DO NOT use E15 or E85 fuel.
Image shows fuel types E15 and E85 with a prohibition symbol.
Startup Procedures
General Precautions: DO NOT plug in any electrical devices while starting or stopping the generator.
- Wireless Start
- Push the battery switch to the "ON" position.
- Turn the EZ Start dial to the full "ON" position.
- Press and release the "START" button on the remote key fob.
Sequence of diagrams: 1. Battery switch ON. 2. EZ Start dial ON. 3. Remote key fob START button pressed. - Electric Start
- Push the battery switch to the "ON" position.
- Turn the EZ Start dial to the full "ON" position.
- Push the choke button.
- Press and hold ignition switch on EZ Start Dial.
- Push the choke button.
Sequence of diagrams: 1. Battery switch ON. 2. EZ Start dial ON. 3. Choke button pressed. 4. Ignition switch pressed and held. 5. Choke button pressed again. - Manual Start
- Push the battery switch to the "ON" position.
- Turn the EZ Start dial to the full "ON" position.
- Push the choke button.
- Pull the recoil to start the engine.
- Push the choke button.
Sequence of diagrams: 1. Battery switch ON. 2. EZ Start dial ON. 3. Choke button pressed. 4. Recoil starter pulled. 5. Choke button pressed again.
Connecting Electrical Loads
Plug in your electrical devices after the generator has started and is running smoothly.
Support and Resources
For assistance or questions, call: ? 1-877-338-0999
Visit our website: www.championpowerequipment.com
Visit our YouTube channel to watch how-to videos and view the latest product updates.