This document serves as an Attestation of Conformity for various GoodWe Hybrid Inverter models, issued to Goodwe Technologies Co., Ltd. The attestation confirms that the examined products meet the requirements of key international and European standards, specifically IEC 62109-1:2010, EN 62109-1:2010, IEC 62109-2:2011, and EN 62109-2:2011. These standards are crucial for the safety of power inverters used in photovoltaic installations.
The attestation is based on comprehensive electrical system evaluations conducted by DEKRA, as detailed in test report no. 6210814.50(A-B). This signifies compliance with the Low Voltage Directive (LVD) 2014/35/EU. The examination was performed on representative product samples, and while it confirms the conformity of the tested specimens, it does not extend to an assessment of the manufacturer's production processes.
The document lists several hybrid inverter models, including GW5K-ET-L-G10, GW6K-ET-L-G10, GW8K-ET-L-G10, GW10K-ET-L-G10, GW12K-ET-L-G10, GW15K-ET-L-G10, GW20K-ET-L-G10, and GW12K-ET-LL-G10. The annex provides detailed technical specifications for these models across battery, PV, AC (on-grid), and backup sides, covering critical parameters such as voltage, current, and power ratings.
The CE marking can be affixed to the product if all applicable EU regulations are met. For further details on the testing and certification process, refer to DEKRA Testing and Certification (Shanghai) Ltd. at www.dekra-product-safety.com.
