Instructions for AcuRite models including: Atlas, 06074, Battery Pack
Title: Battery Pack for AcuRite Atlas™ Model 06074 Instructions Author: AcuRite Keywords: battery, pack, atlas Created Date: 8/28/2017 9:36:37 AM
Remove battery compartment cover from the. 2. Plug the battery pack cord into the battery. 3. Loop the cord through the slot, then replace the. 4. Remove the ...
4 feb 2021 —
File Info : application/pdf, 1 Pages, 5.92MB
DocumentDocumentBattery Pack for AcuRite® AtlasTM Model 06074: REMOVE BATTERY COMPARTMENT COVER INSERT BATTERY PACK CORD LOOP CORD AND REPLACE BATTERY COMPARTMENT COVER REMOVE BATTERY PACK COVER 1. Remove battery compartment cover from the bottom of the AcuRite® AtlasTM outdoor device. Remove batteries if currently installed. 2. Plug the battery pack cord into the battery compartment AcuRite® AtlasTM. INSTALL BATTERIES REPLACE COVER 3. Loop the cord through the slot, then replace the battery compartment cover. 4. Remove the battery pack cover by pulling upward on the cover's tabs (away from the battery pack). MOUNT BATTERY PACK SECURE CABLE 5. Insert 4 x AA alkaline or lithium* batteries into the battery compartment. Heavy duty or rechargeable batteries are not recommended. 6. Replace the battery pack cover. 7a. Mount the battery pack using the integrated hang holes. We recommend mounting on a pole or a flat surface such as a wall or post. The battery pack is water-resistant and is designed for general outdoor use. 7b. Use the included zip ties and hardware to secure excess cable near the battery pack, leaving enough slack for a "drip-loop," preventing rain water from trailing into the battery pack. Installation is complete. * Cold temperatures can cause alkaline batteries to function improperly. Use lithium batteries for temperatures below -4°F (-20°C). QSG17_06074 082817Acrobat Pro DC 20 Paper Capture Plug-in