Fresh 'n Rebel Clam 2 Wireless Over-Ear Headphones
This document provides a quick start guide and essential information for the Fresh 'n Rebel Clam 2 wireless over-ear headphones.
Product Identification
Product Name: CLAM 2 WIRELESS OVER-EAR HEADPHONES
Brand: FRESH N REBEL
Model Number: 3HP4002 v1 001
Manufacturer: Sitecom Europe B.V.
Buttons
The headphones feature several buttons for control:
- Button 1: Power / On-Off
- Button 2: Bluetooth Pairing
- Button 3: Volume Up/Down and Next/Previous Track control
- Button 4: Power LED indicator
Diagram Description: The headphones are shown with four numbered points indicating the control locations: 1. Power/On-Off button, 2. Bluetooth Pairing button, 3. Volume and track control button, 4. LED indicator light.
Getting Started
Follow these steps to set up your headphones:
- Fully charge the headphones.
- Pair with Bluetooth: Press and hold the power/pairing button until the LED indicator blinks.
- On your mobile device, select the 'Clam 2' headphones from the list of available Bluetooth devices.
Diagram Description: Images show the headphones and a mobile device screen. The first image highlights the power/pairing button. The second image shows a close-up of the headphone controls. The third image is a screenshot of a mobile phone's Bluetooth settings, displaying 'Clam 2' as an available device.
General Information and Conformity
Manufacturer: Sitecom Europe B.V., Blaak 6, 3011 TA Rotterdam, The Netherlands.
Conformity Information: Sitecom Europe B.V. declares that this product complies with EU directives 2011/65/EU (ROHS) & 2014/53/EU (RED) and other applicable EU regulations. The full text of the EU declaration of conformity is available at: https://freshnrebel.com/customer-service/support/
Operating Frequency Band: 2400 to 2483.5 MHz.
Maximum Radio-Frequency Power Transmitted: 20 dBm / 100 mW.
UK Conformity: ProductIP (UK) Ltd., as authorized representative of Sitecom Europe B.V., declares compliance with applicable UK Regulations. The full text of the UK Declaration of Conformity is available at the same URL.
Disposal of the Device
The symbol shown on the product and in this guide indicates that it is classified as electrical or electronic equipment. It must not be disposed of with household or commercial waste at the end of its useful life. The Waste of Electrical and Electronic Equipment (WEEE) Directive mandates recycling using the best available recovery and recycling techniques to minimize environmental impact, manage hazardous substances, and reduce landfill. Contact local authorities for information on correct disposal of electrical or electronic equipment.
Symbol Description: A symbol depicting a crossed-out wheeled bin, indicating that the product should not be disposed of with general waste and requires special electronic waste recycling.
Packaging Recycling
The packaging materials have been selected for their environmental friendliness and are recyclable. Dispose of packaging materials in accordance with applicable local regulations.
| Material Type | Recycling Category | Collection Method |
|---|---|---|
| Paperboard (Box/Sleeve/Inlay) | PAP 21 | Paper Collection |
| Foam (PU) | Plastic PU 7 | Plastic Collection |
Recycling Instructions: Separate components before sorting. Check local guidelines for proper disposal.
