For DW8132JW716

Install Diagram

The installation diagram shows the various ports and connections for the DW8132JW716 car stereo. Key components include:

① Radio Antenna
② GPS Module
③ 4G Antenna
④ Reverse line
⑤ RCA Cable
⑥ Canbus Special Port
⑦ Microphone
⑧ Power Harness
⑨ Canbus box
⑩ 4G Card Slot
⑪ Audio Plug
⑫ Audio Plug
⑬ Audio Plug
⑭ USB Cable port
⑮ Fan Plug

The RCA cable connections are detailed as:

F-CAM, Front Camera Input
Video Out, Video Output
CVBS-IN-1, Video Input
Sub Woofer
AUX IN L, Audio Input Left
FL OUT, Audio Output Left
FR OUT, Audio Output Right
AUX IN R, Audio Input Right
MIC, Microphone Port
Fan Plug
AMP, AMP Control Cable
4G Card Slot

There are two connection types shown for amplifier systems: 'Car without Amplifier' and 'Car with Amplifier (Alpine or Infinity system)', illustrating different harness configurations (8 Pin, 4 Pin vs. 28 Pin, 34 Pin).

Note: The frame for the radio is connected to the radio already; you have to pull it off before you install the radio.

FAQ

Q: How to use wireless Apple CarPlay?

A: 1. Check the Bluetooth name of the car radio.
2. Connect your iPhone to the car radio via Bluetooth.
3. Turn on Wi-Fi on iPhone.
4. Go into "TLink5" app. It will be ok.
Below is a video as reference: https://youtu.be/AS4yYlbGryk

Q: How to use wireless Android Auto?

A: 1. Be sure you have installed the app "Android Auto" in your cell phone.
2. Check the Bluetooth name of the car radio.
3. Connect your cell phone to the car radio via Bluetooth.
4. Turn on Wi-Fi on your cell phone.
5. Go into "TLink5" app. It will be ok.
Below is a video as reference: https://youtu.be/eyaTWfTGucA

Q: How to add a Jeep Logo?

A: 1. Copy the picture of the logo to a flash drive. Please download the logo first: https://bit.ly/486Jfuo
2. Insert the flash drive to the USB cable of the car Radio.
3. Go into Settings > Factory (code: 123456) > LOGO Setting and choose the Logo picture, after that press Logo setting.

Q: How to switch it from km/h to mph?

A: Please go into: Theme > settings > Plugin > Speed Unit.

The interface shows options to select between 'mph' and 'km/h' for the speed unit.

Q: How to add an aftermarket backup camera?

A: Please see the photo below. If you need a backup camera, you can buy it via the link below: https://bit.ly/44LTalZ

The diagram illustrates the connection for a backup camera. It shows a 'reverse cable' from the power harness, a 'number "3" pin' on the reverse cable, a 'connected' camera, a 'Red cable 2' connected to the backup light '+', and a 'Black cable 1' connected to the 'GND'.

Q: Steering wheel control doesn't work?

A: Please check it as the photo show below:

1. Please be sure the 2 canbus have been connected.
2. Please be sure the 1 cable have been connected.

Q: Why is there no sound coming out?

A: First, please check the audio cable connect as the photo show below.

The diagram shows audio cable connections for 'Car without Amplifier' (28Pin) and 'Car with Amplifier (Alpine or Infinity system)' (34Pin), highlighting specific pins (8Pin, 4Pin).

For DW8132JW716

Install Diagram

FAQ

References