AbleNet SuperTalker™ FT Quick Start Guide
For Speech Device
1 Product Registration
Registering your product provides access to ableCARE, product updates, and resources. Scan the QR code below to register your product.
[QR Code for Product Registration]
2 Getting Started
Scan the QR code below to watch a short getting started video or follow the instructions.
[QR Code for Getting Started Video]
To get started:
- Add four alkaline AA batteries (not included).
- Select and attach a message grid for 1, 2, 4, or 8 message locations.
- Turn the device on.
- Select a level and grid using the controls on the device spine.
- Press and hold the record button until the record light activates, then release.
- Press and hold the desired message location, speak when you hear a beep, and release when finished.
- Press and release the record button to exit record mode.
- Your device is ready to use.
For full instructions, visit www.ablenetinc.com.
3 Device Overview
The SuperTalker™ FT features:
Key Components:
- Microphone: For recording.
- Recording Indicator Light: Shows recording status.
- Volume Control Buttons: Adjust sound volume.
- Sound Output Speaker: Plays messages.
- Battery Compartment: Holds AA batteries.
- On/Off Switch: Powers the device.
- Message Grid Release: For swapping grids.
- Message Grid: Surface for message overlays.
- Levels Dial: Selects message level (1-8).
- Grid Switch: Selects grid size (1, 2, 4, or 8 locations).
- Record Button: For recording and exiting record mode.
Message Grids:
Supports 1, 2, 4, and 8-message formats. Grids attach to the front; storage is under a panel.
Additional Features:
- Step Ahead Jack: Sequential message activation via external switch.
- Toy/Appliance Jack: Activates connected toy/appliance with message playback.
Indicators:
- Low Battery: Flashing light indicates battery replacement needed.
- Low Memory: Yellow light means less than 2 minutes of record time remain.
ableCARE™ App
Download the ableCARE app for live support, an online knowledge base with videos, and more resources.
Scan the QR code below to download the free app.
[QR Code for ableCARE App Download]
[App Store Link] [Google Play Link]
Warranty
AbleNet products have a 2-year limited warranty against material and manufacturing defects. See www.ablenetinc.com for full details.