Philips XU3000 Robot Vacuum Cleaner

Getting Started

Scan the QR code below or visit home.id/welcome to get started.

You can also:

• Register for Registration and Benefits ?
• Download app ?
• Follow the Quick start guide ▶️
• Access the Digital manual ?

Product Overview

The Philips XU3000 robot vacuum cleaner comes with the following components:

• Robot vacuum cleaner
• Charging dock
• Side brushes (2x)
• Power adapter
• Dustbin

Setup Instructions

Charging the Robot

1. Place the charging dock against a wall with adequate space around it (0.5m on sides, 1.5m in front).
2. Connect the power adapter to the charging dock and plug it into a power outlet.
3. Turn the robot ON and place it on the charging dock. The robot will start charging.

Connecting to the Philips HomeRun App

1. Download the Philips HomeRun app from your smartphone's app store.
2. Open the app and follow the on-screen instructions to connect your robot vacuum. This may involve scanning a QR code on the robot or connecting via Wi-Fi.
3. Ensure your robot is powered on and within Wi-Fi range.

Maintenance

Cleaning the Dustbin and Filter

1. Remove the dustbin from the robot.
2. Open the dustbin and empty the contents.
3. Clean the filter. It is recommended to wash the filter with water (MAX 60°C) and let it dry completely before reinserting.
4. Reinsert the dustbin into the robot.

Cleaning the Brushes

1. Turn the robot upside down.
2. Remove the main brush and side brushes.
3. Clean any hair or debris from the brushes.
4. Reattach the brushes.

Troubleshooting

For detailed troubleshooting, please refer to the digital manual accessible via the Philips HomeRun app or the provided QR code.

Product Information

Model: XU3000

Brand: Philips

This product is made from over 75% recycled paper.