RULLERUM Electric Recliner Armchair
Brand: IKEA
Product Overview
This document provides assembly instructions for the IKEA RULLERUM electric recliner armchair. It details the parts required and the step-by-step process to assemble and set up the chair.
Parts List
- 4x Chair Legs (Part Number: 10050334)
- 1x Hexagonal Pad set (Part Number: 10050334)
- 1x Power Adapter
- 1x Power Cord
Assembly Instructions
Step 1: Prepare and Attach Legs
Flip the chair upside down. Protect the upholstery by placing it on a soft surface. Screw the four legs (part number 10050334) into the designated sockets on the chair's base.
Step 2: Connect Motor Cable
Locate the motor mechanism underneath the chair. Connect the power cable to the motor.
Step 3: Secure Fabric Cover
Pull the fabric cover down and zip it closed.
Step 4: Attach Armrest Mechanisms
Attach the two armrest support mechanisms to the sides of the chair frame.
Step 5: Install Backrest
Align the backrest with the chair frame and push down firmly until it clicks into place.
Step 6: Adjust Fabric Skirt
Pull down the fabric skirt located at the back of the chair.
Step 7: Connect Power Adapter to Chair
Connect the power adapter to the chair's power input port.
Step 8: Connect to Wall Outlet
Connect the power cord to the power adapter and then plug it into a standard wall socket.
Step 9: Operate Recliner Functions
Use the control buttons to operate the recliner. Press the appropriate button to recline the backrest and extend the footrest. Press the other button to return the footrest and backrest to the upright position.
Safety Information
⚠️ Important Safety Warnings:
- Do not sit on the chair if the footrest is extended and the backrest is not fully upright.
- Avoid sitting on the chair in positions that could lead to instability or potential injury.
- Always ensure the chair is placed on a stable and level surface.
