EchoMaster – Aftermarket Vehicle Safety Products for Consumer and Commercial Drivers
Instruction Manual for ECHOMASTER models including: P-BUA-RANGER Wiring Harness for Backup Alarm, P-BUA-RANGER, Wiring Harness for Backup Alarm, Backup Alarm
2022-01-31 — STEP 4: Use an impact drill and 10mm nut-setter to install a compatible backup alarm on the underside of the vehicle. Note: (2) 10mm TEK screws are provided.
File Info : application/pdf, 6 Pages, 204.75KB
DocumentDocumentP-BUA-RANGER Wiring Harness for Backup Alarm 2019-2021 Ford Ranger INSTALLATION MANUAL Thank you for purchasing the P-BUA-RANGER Table of Contents Page 3 - Tools Required For Installation WHAT'S INCLUDED: · Vehicle Specific Wire Harness (P-BUA-RANGER) COMPATIBLE ACCESSORIES: · 97dB Backup Alarm (BUA-97C) · 97dB White Noise Backup Alarm (BUA-97WNC) 2 TOOLS REQUIRED: 1. 2. 3. 1. 10mm Nut-setter 2. Impact Drill 3. Diagonal Cutters 3 STEP 1: Locate the OEM tail lamp connector that is on the outside of the driver side frame rail STEP 2: Unplug the OEM connector and install the P-BUA-RANGER harness between the OEM connectors STEP 3: Route the harness over the top side of the frame rail, toward the center of the truck 4 STEP 4: Use an impact drill and 10mm nut-setter to install a compatible backup alarm on the underside of the vehicle Note: (2) 10mm TEK screws are provided with the compatible backup alarm STEP 5: Plug the backup alarm connector into the mating connector on the P-BUA-RANGER harness. Secure any excess wiring with cable ties. Use diagonal cutters to remove excess cable tie material. STEP 6: Test the backup alarm 5 Phone 866-766-2267 E-Mail support@aampglobal.com EchoMaster is a Power Brand of AAMP Global EchoMaster.com