USER'S MANUAL

Announcements and Important Safety Precautions

Thank you for purchasing this digital projector series. Please read through this manual for proper use of this product. After reading, please put this manual together with the warranty card in a safe place for reference. Please read this instruction manual if you need to know something or have any problems.

[Notice] To prevent electric shock, do not open the chassis. There are no parts in the machine that the customer can repair. Please entrust qualified professional maintenance personnel to carry out maintenance.

This sign reminds the user that great care must be taken in operation and repair; therefore, it must be read carefully to prevent any failures.

This sign warns the user that uninsulated voltages in the unit may cause electric shock from the surface magnetic field, and therefore it is dangerous to contact any part of the unit.

[Warning] To prevent fire or electric shock, do not expose the unit to rain or moisture. Do not open the case.

[Warning]: Do not look directly at or stare at the light beam from the lens. Strong light may cause eye discomfort or damage. Parents should supervise and educate children to use it properly.

Suitable for altitude less than 2000 m and non-hot climate.

Identification of Electronic Information Product Pollution Control Labeling Requirements

(1) Contains the name of 6 kinds of harmful substances, contains the amount, contains part.

This product is contained in the name of the 6 kinds of harmful substances, contain quantity, containing the part shown in the table below:

Note (meaning of [o] or [x]): [o] indicates that the content of the toxic and harmful substance in all homogeneous materials of the component is below the limit requirements specified in SJ/T11363-2006 standard. [x] means that the content of the toxic and harmful substance in at least one homogeneous material of the component exceeds the limit requirements specified in SJ/T11363-2006 standard.

1. "Frame" of part name, including external frame and internal component.

(2) Pollution control label of electronic information products.

The environmental protection service life of this product is marked according to the national pollution Control And Management Measures for Electronic information Products published on 2/28/2006. As long as the product can comply with the safety and use of matters needing attention, from the production date within the number of years, it will not have a profound impact on environmental pollution, human body, property.

When the product is discarded after normal use, the recycling and reuse of electronic information products should comply with the requirements of local laws and regulations.

(3) Packaging recycling mark (GB18455-2001)

According to the packaging recycling mark (GB18455-2001), each packaging material of the product is identified.

When discarding packaging materials, please comply with local laws and regulations on recycling and reuse of packaging materials.

Use of Remote Control

The remote control has the following buttons:

• [Power Button] Power button
• [Function Button] Function button
• [Return] Return
• [Volume Down] Volume Down
• [Mute] Mute
• [Direction Key] Direction key
• [Menu] Menu
• [Source] Source
• [Volume Up] Volume Up

Check Before Use & UI Overview

UI Edition 1

Turn on the projector, please check your projector UI Edition ([UI 1]).

This UI is the Basic function model UI. It can support playing Video, Music, Photo. You can also connect it with your smartphone via the USB original cable.

Users need to select the correct signal input source before accessing the computer, TV, set-top box, game box, DVD, etc.

UI Edition 2

Turn on the projector, please check your projector UI Edition ([UI 2]).

This UI supports wireless screen mirroring function. It can support playing Video, Music, Photo. You can also connect it with your smartphone via the USB original cable.

Users need to select the correct signal input source before accessing the computer, TV, set-top box, game box, DVD, etc.

Connectivity

Wired Screen Function

Press the [Source] button or press [Wired Screen Function] under UI two. Then choose [Wired Screen Function], and the below UI will show up.

Android Screen Mirroring

[Android Cable for Screen Mirroring]

1. Connect your Android phone to the projector via the original Android phone cable. (The data cable must have a USB port and be connected to a computer to read the contents of the phone).
2. Install the APK required for the same screen according to the prompt, or scan the two-dimensional code on the projector screen interface to download and install.
3. After the APK is installed successfully, the same screen function can be realized.
4. Note that when Android phones are on the same screen, the sound is coming from the phone, not from the projector.

iOS Screen Mirroring

[iOS Connect by Cables]

1. Connect your iPhone to the projector via the original iPhone charging cable. (Cable has a USB port and Lighting Port).
2. Please click "Trust" when the iPhone shows a pop-up window.
3. Enter device password.
4. After the APK is installed successfully, the same screen function can be realized.

Setting Wi-Fi

1. Press the [Setting] button on the remote control or enter the setting function on the first page of the second UI.
2. After entering the Wi-Fi setting interface, open the "Wireless and Internet" button.
3. Choose a Wi-Fi network and input the password, then connect.

Please ensure your smartphone and projector are connected to the same Wi-Fi.

Nearby Wi-Fi Networks

• [TP-LINK 5550]
• [TP-LINK 8093]
• [农夫山泉]
• [Direct-94-Mi All-in-One Ink]
• [360WiFi-Plus-OTEBAB]
• [SKILHUNT]
• [Tenda 206400 5G]
• [TP-LINK 535D]
• [ChinaNET Guest]
• [TP-LINK 5350]

Wi-Fi Connection Details:

[SSID: Hccast-OFD9DC]

[IP: 192.168.1.100]

[Password: 12345678]

[✔ Connected]

Wireless Screen

[Wireless Screen] support for Apple and Android devices.

1. Turn on the Wi-Fi of the mobile phone.
2. Turn on the "Wireless Display" / "Screen Mirroring" function in the phone settings and choose the device name. Then connect.

Media and Settings

Media

Under the second UI, the [Media] page can play video, music, photos, and e-books.

You can use the remote control to choose and play after connecting to a USB drive or hard disk.

Settings

You can set [Language], [Image Mode], [Color], or [Keystone], etc. here.

Example Settings:

• [Image Mode]: [Standard]
• [Contrast]: 50
• [Brightness]: 50
• [Color]: 50
• [Picture]: 50
• [Sharpness]: 5
• [Color Temperature]: [Standard]
• [Keystone]: [Adjust]
• [Focus]: [Adjust]

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

[Caution]: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.