Owner's Manual for TOYOTA models including: 3D Panoramic View Monitor PVM, Panoramic View Monitor PVM, View Monitor PVM, Monitor PVM
1 day ago —
PANORAMIC VIEW MONITOR (PVM) OWNERS MANUAL Please read this manual for proper operation and keep it for future reference. TABLE OF CONTENTS PANORAMIC VIEW MONITOR (PVM) Section 1.0 Product Features Title 2.0 About the system 3.0 Performance parameter 4.0 Display interface introduction 5.0 5.1 5.2 5.3 5.4 5.5 Logical switching PVM Entry/Exit R Gear Screen switching 3D model selection 3D color selection 6.0 Attention Page 3 4 5 6 7 7 8 8 10 11 12 Please read this manual for proper operation and keep it for future reference. SECTION 1.0 Product Features 1.0 Product Features Bird view +3D view from all directions. Front and rear view full screen display, reverse view display. Clicking the icon on the HU screen, click to switch different viewing angles, or you may switch the reverse view by hanging the R gear. There are warning lines in front of the model car to warn the driver of the danger of a collision. The reversing view has three color warning lines, with different colors representing different distances from the car. High-performance fisheye cameras and waterproof capabilities are designed to provide a better customer experience. The forward viewing Angle occlusion design prevents the driver from dangerously over-relying on the PVM. Please read this manual for proper operation and keep it for future reference. 3/14 SECTION 2.0 About the system 2.0 About the system The PVM contains 4 pieces of cameras which are installed in front, back, left and right sides of the car. The camera images indicated on head unit displays in panoramic view and show the blind area of the vehicle through different angles. display screen Installation effect diagram on the left Controller installation effect Rear view installation effect Installation display display Install the effect diagram on the right Please read this manual for proper operation and keep it for future reference. 4/14 SECTION 3.0 Performance parameter 3.0 Performance parameter The following table lists the technical specifications of the ECU. No. Item Technical parameter 1 Operating voltage DC +12V 2 Operating voltage range 9~16V 3 Operating temperature -40~85 4 Storage temperature -40~95 5 Dark current 0.3mA 6 Working current 0.9A(+B=12V Camera included) 7 Shell material ADC-12(cast aluminium) 8 Video input AHD/1280*720 9 Video output 10 System startup time (cold startup) CVBS/720*4801.0Vp-p@75 6s The following table lists the technical specifications of the camera. No. Item Technical parameter 1 Pixel resolution 1280(H) X 720(V) 2 Frame rate 25fps 3 Transmission mode AHD 4 FOV H.FOV=200° V.FOV=130° 5 Lens aperture F2.0 6 Minimum illumination 0.1lux 7 Optical axis accuracy 2° 8 Exposure AUTO(AE) 9 White balance AUTO(AWB) 10 Operating voltage DC 6.5V-7.5V 11 Working current 110 130mA 12 Operating temperature -40~85 13 Storage temperature -40~95 14 Shell material ADC-12(cast aluminum) 15 Waterproof class IP67 Please read this manual for proper operation and keep it for future reference. 5/14 SECTION 4.0 Display interface introduction 4.0 Display interface introduction The interface presented on the display is divided into three parts: bird's eye view, single view Angle, navigation bar icon. Bird view Single view Angle Navigation bar icon 50cm from car Auxiliary wire introduction zone Exclusion zone Slow-moving zone Warning area distance 50CM 100CM 200CM Color Red Yellow Green Please read this manual for proper operation and keep it for future reference. 6/14 SECTION 5.0 5.1 PVM Entry/Exit SECTION 5.0 Logical switching Click PVM on Head unit Click PVM on Head unit Exit PVM inter HU screen When the vehicle is in non-R gear and the speed is less than 20km/h, click the HU PVM ICON to enter the PVM . Start 3D model rotation 10s and stop, PVM is displayed. Please read this manual for proper operation and keep it for future reference. 7/14 SECTION 5.0 5.2 R Gear Logical switching R Apabila fail R hilang, PVM keluar ke skrin HU. When the R file disappears, the PVM exits to the HU screen. 5.3 Screen switching Click the icon Click the icon Please read this manual for proper operation and keep it for future reference. 8/14 SECTION 5.0 Logical switching Click the icon Click the icon Click the icon Click the icon Please read this manual for proper operation and keep it for future reference. 9/14 SECTION 5.0 Logical switching Click the icon Click the icon 5.4 3D model selection Click the zone Click once to switch models once Please read this manual for proper operation and keep it for future reference. 10/14 5.5 3D color selection SECTION 5.0 Logical switching Click the zone Click once to switch color once 2.8 GR 2.7 & 2.4 Please read this manual for proper operation and keep it for future reference. 11/14 SECTION 6.0 Attention Instructions for use PVM is used at low speed and reversing, during the driving process, please pay attention to observe the surrounding situation of the vehicle, otherwise, it may cause a collision, please pay attention to the use of this system: Danger PVM is a convenient feature but it is not a substitute for proper vehicle operation because it has blind area whereobjects cannot be viewed. Always look out the windows and check mirrors to be sure that it is safe to move.The driver is always responsible for safety during parking and other maneuvers. Be careful when driving.Please reverse slowly and control the speed. The instructions provided in this article are for reference only. The Angle of turning the steering wheel when parking should refer to the change of traffic conditions and road conditions. You must know this before using this system. Do not use PVM with the outside mirror in the folding position, and make sure that the trunk lid securely closed when operating the vehicle using PVM. The image display on the screen is limited. It is normal for the image to be distorted at a distance from the vehicle body. Warning Do not use PVM in the following situations: In rain, snow, fog, wind and sand weather When the suitcase is not fully closed When on uneven, steep, winding roads If the tire speciDfriicveartAiolenrts(DAc)hange, the splice on the screen and the reverse guide line may be deviated PVM uses a special fisheye lens, and the distance between the object and the pedestrian displayed in the picture may be different from the actual distance, please note Please read this manual for proper operation and keep it for future reference. 12/14 SECTION 6.0 Attention Attention please PVM may not work in the following situations If the vehicle is hit, the installation position of the camera changes Do not remove or modify the camera. Otherwise, the camera may not work Do not paste organic solution, car wax, window cleaner on the camera, if it happens, please wipe it clean as soon as possible When washing the car, do not spray water at high pressure on the camera, otherwise the camera will fail The difference between the picture and the actual display Even if the PVM splicing screen looks parallel to the parking space line, it may not be parallel, please check by the driver incomplete or even double shadow, which is a normal situation, please be sure to use the rearview mirror to assist observation. The lower part of the camera's vision will be blocked by the car body, and there will be an invisible blind area on the ground (the shadow in the figure below). Please be sure to drive carefully to prevent collision. Please read this manual for proper operation and keep it for future reference. 13/14 SECTION 6.0 Attention PVM can only ensure accurate guidance on a flat road surface, in any of the following cases, there will be a certain error between the image perception on the screen and the actual distance When the road slope rises before and after the vehicle When the slope of the road before and after the vehicle drops The vehicle is fully loaded PVM is calibrated in the no-load splicing, if the car is fully loaded, the car body will fall, resulting in the picture of splicing dislocation. The object shown in the picture is closer than the reality, please watch carefully. Please read this manual for proper operation and keep it for future reference. 14/14Microsoft Excel for Microsoft 365