Yandoctor WS1 Smart Ear Stick
User Manual
WS1 Usage
1. Download APP: Scan the QR code to download the Yandoctor APP.
2. Power On: Open the cover, and the device powers on automatically. The red light flashes when the battery is low, indicating it needs charging.
3. Connect WiFi: Connect to the product's WiFi.
4. Start Observation: Go back to the APP and click 'Begin'. The app allows real-time observation of the ear canal, with the ear spoon not obstructing your view.
5. Attach Ear Spoon: Spin to tighten the fixing ring, then spin to tighten the ear spoon. For silicone ear spoons, connect the ring first, then the silicone ear spoon.
6. Intelligent Children Lock: Prevents children from misoperating the device.
7. Power Off: Close the cover to turn off the device and its light.
Product Details
Function Introduction
The camera provides a convenient ear cleaning experience. For safety, children should not use this otoscope alone; adult supervision is recommended.
Product Model and Accessories
Product Model: WS1
- Type-C Cable
- Alcohol Swab
- Metal Earwax Spoon
- Silicone Earwax Spoon
- Silica Gel Ear Spoon Adaptor
- Feather Brush
Product Specifications
- Brand: Yandoctor
- Product Name: Smart Ear Stick
- Product Model: WS1
- Image Transfer Rate: 25fps
- Image Transmitter: CMOS
- Working Temperature: -10~50°C
- Battery Type: Lithium battery
- Input Current: DC 5V 1A
- Battery Life: About 90 minutes
- Charging Time: About 1 hour
- Pipe Diameter: 3.5mm
- Best Focal Length: 1.6cm
Qualification Certificate
Product Name: Smart Ear Stick
Inspector: Yuanjiao Bao
Precautions
- This product is not suitable for children under 6 years old.
- For children over 6 years old, adult supervision is recommended when using this otoscope.
- When assisting children with ear cleaning, use silicone ear picks, ensure the child is sitting, and operate the product horizontally for the best experience.
- Observe your surroundings before use to prevent ear canal damage caused by collisions with others or pets.
- Clean the lens with the provided alcohol swab.
- Avoid direct sun exposure, which can soften the silicone ear spoon.
- If not used frequently, charge the built-in lithium battery once a month to prevent equipment failure.
- A slight temperature rise (not exceeding 35°C) during use is normal; rest assured.
FCC Warning
This device complies with section 15 of the FCC regulations. Operation is subject to two conditions: (1) the equipment will not cause harmful interference, and (2) the equipment must accept any interference received, including interference that may cause unexpected operation. This device has been tested and complies with the restrictions for Class B digital devices under FCC section 15. Changes or modifications not expressly approved by the responsible compliance party may void the user's authority to operate the equipment.
Interference Measures: If the device causes harmful interference with radio or television reception, try the following:
- Readjust or relocate receiving antennas.
- Increase the distance between the equipment and radio/TV.
- Consult distributors or experienced technicians.
Frequently Asked Questions
Common Problems and Solutions
| Problem | Solution |
|---|---|
| No response after startup | Charge for 1 hour using the supplied charging cable. |
| Application Crash | Turn off and restart the otoscope. Uninstall and reinstall the APP by scanning the QR code. |
| Power indicator flashes in red | The battery is low. Charge for 1 hour using the supplied charging cable. |
| Camera cannot display real-time image correctly after connecting to APP | Disconnect from WiFi, restart the WiFi, and reconnect. Restart the otoscope and reconnect the APP. |
| WiFi connection is unstable and sometimes disconnects in seconds | Some phones require authorization. Restart the otoscope and reconnect the APP. |
If the above solutions do not resolve the issue, please contact customer service for further assistance.
CE FC ROHS
Made in China