Miele DA 2360 / DA 2390 Range Hood Installation Guide
Safety Warnings
⚠️ To prevent accidents and appliance damage, read the Operating and Installation Instructions before installation or use.
CAUTION: During the installation process, please be careful of sharp edges that can cause harm.
⚠️ Pour prévenir les accidents et éviter d'endommager l'appareil, veuillez lire Instructions d'utilisation et d'installation avant l'installation ou l'utilisation.
AVERTISSEMENT: Durant l'installation, veuillez faire attention aux rebords tranchants qui pourraient vous blesser.
⚠️ Antes de instalar y usar el aparato y con el fin de prevenir accidentes y daños al mismo, lea el Manual de uso y manejo correspondientes.
PRECAUCIÓN: Durante el proceso de instalación, tenga cuidado con los bordes afilados que pudieran ocasionar daños.
Installation Steps
Identify the operational mode: AE (Air Extraction Mode) or RM (Recirculation Mode).
Prepare the main appliance unit. Note the required screws: 1x for DA 2360, 2x for DA 2390.
Position the appliance unit against the mounting surface.
Secure the appliance using screws. Use 4x T20 screws and 11x T20 screws. Ensure the unit is oriented correctly with the [Front] indicated.
Configuration A (5a): Attach components using 4x T20 and 11x T20 screws.
Configuration B (5b): Attach components using 2x T20 screws.
Connect the ducting to the appliance. Secure the connection using 4x M5x40 screws with a T25 tool.
For Recirculation (RM) mode, attach the filter. This step references the Miele DUU 151 accessory.
Reference for Miele DUU 150 accessory.
Install internal components. Secure using 4x screws for DA 2360 and 10x screws for DA 2390.
For Recirculation (RM) mode, install the filter, referencing the Miele DKF 19-900 filter.
Complete the final securing of the appliance. Use 1x screw for DA 2360 and 2x screws for DA 2390.